Abstract:Abstract This paper presents 3D Fabry–Pérot (FP) cavities fabricated directly onto cleaved ends of low-loss optical fibers by a two-photon polymerization (2PP) process. This fabrication technique is quick, simple, and inexpensive compared to planar microfabrication processes, which enables rapid prototyping and the ability to adapt to new requirements. These devices also utilize true 3D design freedom, facilitating the realization of microscale optical elements with challenging geometries. Three different device types were fabricated and evaluated: an unreleased single-cavity device, a released dual-cavity device, and a released hemispherical mirror dual-cavity device. Each iteration improved the quality of the FP cavity’s reflection spectrum. The unreleased device demonstrated an extinction ratio around 1.90, the released device achieved 61, and the hemispherical device achieved 253, providing a strong signal to observe changes in the free spectral range of the device’s reflection response. The reflectance of the photopolymer was also estimated to be between 0.2 and 0.3 over the spectrum of interest. The dual-cavity devices include both an open cavity, which can interact with an interstitial medium, and a second solid cavity, which provides a static reference reflection. The hemispherical dual-cavity device further improves the quality of the reflection signal with a more consistent resonance, and reduced sensitivity to misalignment. These advanced features, which are very challenging to realize with traditional planar microfabrication techniques, are fabricated in a single patterning step. The usability of these FP cavities as thermal radiation sensors with excellent linear response and sensitivity over a broad range of temperature is reported. The 3D structuring capability the 2PP process has enabled the creation of a suspended FP heat sensor that exhibited linear response over the temperature range of 20 oC –120 oC; temperature sensitivity of ∼50 pm oC −1 at around 1550 nm wavelength; and sensitivity improvement of better than 9x of the solidly-mounted sensors.

Femtosecond Laser 3D Nano‐Printing for Functionalization of Optical Fiber Tips

Recent Progress in Optical Micro/Nanofiber Technology

3D nanoprinting for fiber-integrated achromatic diffractive lens

Brief Introduction to Optical Microfibers and Nanofibers

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

3D Printing of Glass Micro-Optics with Subwavelength Features on Optical Fiber Tips

Research Progress on Optical Fiber Functional Devices Fabricated by Femtosecond Laser Micro-Nano Processing

Functionalized Polymer Nanofibers: a Versatile Platform for Manipulating Light at the Nanoscale

Plasmonic Functionality of Optical Fiber Tips: Mechanisms, Fabrications, and Applications

Multifunctional integration on optical fiber tips: challenges and opportunities

Femtosecond Laser Micro/nano Processing: From Fundamental to Applications

Fabrication Methods and High-Precision Diameter Control Techniques of Optical Micro-/Nanofibers

Ultrafast Laser 3D Nanolithography of Fiber-Integrated Silica Microdevices

Three-dimensional Fabry–Pérot cavities sculpted on fiber tips using a multiphoton polymerization process

Nanosphere lithography for optical fiber tip nanoprobes

Microfiber and Nanofiber Optics: Principles and Applications

Nanoimprint of a 3D structure on an optical fiber for light wavefront manipulation

Optical Microfiber-Based Ultrafast Fiber Lasers

3D Femtosecond Laser Nanoprinting

Optical Fiber Integrated Functional Micro-/Nanostructure Induced by Two-Photon Polymerization

Focused ion beam nanoscale patterned transmission-enhanced fiber-optic tips.