Abstract:Recent developments indicate that the application of pultruded FRP profiles has been continuously growing in the construction industry. Generating more complex structures composed of pultruded FRP profiles requires joining them. In particular, I-shape glass fiber pultruded profiles are commonly used and the possible joints to connect them should be specifically studied. The mechanical behavior of adhesively and bolted joints for pultruded Glass FRP (GFRP) profiles has been experimentally addressed and numerically modeled. A total of nine specimens with different configurations (bolted joints, adhesive joints, web joints, web and flange joints, and two different angles between profiles) were fabricated and tested, extending the available published information. The novelty of the research is in the direct comparison of joint technologies (bolted vs. adhesive), joint configuration (web vs. flange + web) and angles between profiles in a comprehensive way. Plates for flange joints were fabricated with carbon fiber FRP. Experimental results indicate that adding the bolted flange connection allowed for a slight increase of the load bearing capacity (up to 15%) but a significant increase in the stiffness (between 2 and 7 times). Hence, it is concluded that using carbon FRP bolted flange connection should be considered when increasing the joint stiffness is sought. Adhesively connections only reached 25% of the expected shear strength according to the adhesive producer if comparing the numerically calculated shear strength at the failure time with the shear strength capacity of the adhesive. Apart from assessing adhesive connections, the implemented 3D numerical model was aimed at providing a simplified effective tool to effectively design bolted joints. Although the accurate fitting between experimental and numerical results of the mechanical response, especially the stiffness of the joint, the local failure experimentally observed was not automatically represented by the model, because of the simplified definition of the materials oriented to make the model available for a wide range of practitioners.

Experimental and finite element investigation on bolted connection in monolithic 3-dimensional cuff with pultruded box section

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Experimental and Analytical Study of Hollow Section Concrete-Filled GFRP Tubes in Bending

Bonded Sleeve Connections for Joining Tubular GFRP Beam to Steel Member: Numerical Investigation with Experimental Validation

Behavior of Cross Arms Inserted in Concrete-Filled Circular GFRP Tubular Columns

Experimental Investigation and Design of Hollow Section, Centrifugal Concrete-Filled GFRP Tube Columns

Experimental and Numerical Study of Adhesively and Bolted Connections of Pultruded GFRP I-Shape Profiles

Cyclic Performance of Bonded Sleeve Beam-Column Connections

Bending Performance of Splice Connections for Assembly of Tubular Section FRP Members: Experimental and Numerical Study

A novel ductile connection for FRP pultruded beam-to-column assemblies

Comparative Study on Static and Fatigue Performances of Pultruded GFRP Joints Using Ordinary and Blind Bolts

Finite element and theoretical investigations on PVC–CFRP confined concrete columns under axial compression

Investigation on various section GFRP profile strengthening concrete-filled GFRP tubular columns

Seismic performance evaluation of steel beam to concrete confined with FRP tube column connections

Experimental assessment and theoretical evaluation of axial behavior of short and slender CFFT columns reinforced with steel and CFRP bars

Experimental and Nonlinear Finite Element Simulation of Compressive Behavior in Natural FRP-Concrete-Steel Double-Skin Rectangular Tubular Columns

Experimental study and optimal design of axial behavior of UHPC-filled glass-fiber-reinforced polymer pultruded square columns

Buckling Analysis of Pultruded Glass Fiber Reinforced Polymer (GFRP) Angle Sections

Experimental study on PVC-CFRP confined concrete column-beam interior joint reinforced with core steel tube under low cyclic loading

Development and behavior of novel FRP-UHPC tubular members

Axial Compression Behavior of Pultruded GFRP Channel Sections