G. Dobbs,Balamurali Balu,C. Young,C. Kranz,D. Hess,B. Mizaikoff
Abstract:In this study, plasma-polymerized films are evaluated as enrichment membranes deposited at the surface of mid-infrared transparent waveguides for liquid-phase chemical sensing utilizing evanescent field absorption spectroscopy. Fluorocarbon films were deposited onto zinc selenide (ZnSe) waveguides from plasma-polymerized pentafluoroethane (CF(3)CHF(2)) vapor. Excellent optical transmission of ZnSe waveguides after plasma deposition confirms compatibility of the infrared transparent substrate with this low-temperature, solvent-free film deposition process. The liquid-phase enrichment characteristics for plasma membranes were investigated via evanescent field absorption spectroscopy of a model analyte (tetrachloroethylene); the limits of detection were below 300 ppb (v/v) in water. Plasma-polymerized films are known for their excellent mechanical and chemical stability, while offering tunable chemical and physical characteristics during the deposition process. Future application of this coating strategy for depositing robust enrichment membranes with tunable batch production capability imparts an attractive route toward application-oriented development of next-generation mid-infrared chemical sensors applicable in harsh environments.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to deeply understand the microscopic mechanism of the heat - diffusive transport process (i.e., the Ludwig - Soret effect) in binary Lennard - Jones liquids. Specifically, the main research objectives include:
1. **Understanding the microscopic mechanism**: Through computer simulations, especially the reverse non - equilibrium molecular dynamics (RNEMD) method, study the specific mechanism of heat diffusion at the microscopic level.
2. **Calculating the Soret coefficient**: Systematically calculate the Soret coefficient under different conditions to understand how it depends on the physical parameters of the system (such as mass, atomic diameter, and interaction strength).
3. **Exploring the influence of parameters**: Study the influence of the mass ratio, atomic diameter ratio, and interaction strength ratio on the Soret coefficient, and determine how changes in these parameters affect the migration behavior of substances under a temperature gradient.
4. **Verifying theoretical assumptions**: Verify whether the description of heat diffusion in the linear irreversible thermodynamics theory is accurate through simulated experimental data.
### Specific problems and methods
- **Research object**: Binary Lennard - Jones fluids, especially under conditions close to the triple - point of a component.
- **Parameter changes**: Change the mass ratio, atomic diameter ratio, and interaction strength ratio respectively while keeping other parameters fixed.
- **Simulation method**: Use the reverse non - equilibrium molecular dynamics (RNEMD) method for simulation. This method can apply an artificial heat flux and measure the resulting temperature gradient.
- **Data analysis**: Analyze the simulation results, determine the sign and magnitude of the Soret coefficient, and explore whether the contributions of different parameters are approximately additive.
### Main findings
- **Influence of mass ratio**: Heavier species tend to accumulate in the cold region, while lighter species migrate to the hot region.
- **Influence of atomic diameter ratio**: Smaller particles tend to accumulate in the cold region, although they have higher mobility.
- **Influence of interaction strength ratio**: Species with stronger interactions also tend to accumulate in the cold region.
- **Parameter superposition**: Within the range of experimentally relevant parameters, the contributions of each parameter are almost additive, and the mass ratio is usually the decisive factor.
Through these studies, the author hopes to provide a deeper understanding of the heat - diffusion effect and theoretical support for future research and applications.