Abstract:NASICON (super ion conductor)-type Na3V2(PO4)3 (NVP) is considered to be one of the most promising cathode materials for sodium-ion batteries (SIBs) due to its good structural stability, fast Na+ diffusion coefficient, and excellent electrochemical properties. However, the poor intrinsic conductivity and electronic conductivity and severe volume shrinkage of NVP, resulting in serious limitations in the practical application of NVP materials. Carbon, especially N-doped carbon modification, is the most effective method and strategy to improve the conductivity of NVP. The study of N source and N content in carbon plays a very important role in improving the electronic properties. Herein, N-doped carbon coated NVP composites was synthesized via the classical sol-gel method using common, green and inexpensive urea and polyvinylpyrrolidone (PVP) as N sources, respectively. According to EIS tests and GITT tests, N-doped carbon layers with urea as the N source significantly improved the conductivity of the carbon layers and the Na+ diffusion kinetics. The effects of N-doped carbon layers on the electrode kinetics and electrochemical properties of NVP materials were investigated in detail. The optimized U-NC15@NVP composite exhibited a maximum discharge capacity of 114.2 mAh g−1 at 0.2C and 92.1% capacity retention after 400 cycles at 1C. When the optimal U-NC15@NVP electrode was selected to assemble a symmetric full cell, the reversible discharge capacity was 75.0 mAh g−1 after 100 cycles at 1C. The density functional theory (DFT) calculations establish that N-doped carbon can generate lots of active sites and external defects, which is beneficial to reduce the energy bandwidth of the carbon layer and thus improve the conductivity of the carbon layer. Additionally, it can also reduce the Na+ diffusion barrier and improve the adsorption energy for Na+. Experimental tests and theoretical calculations show that N-doped carbon can significantly increase the conductivity of the carbon layer and improve the electrochemical properties of NVP.

Investigations about the influence of different carbon matrixes on the electrochemical performance of Na3V2(PO4)3 cathode material for sodium ion batteries

Silicon substituted Na3V2(PO4)3/C nanocomposites enwrapped on conducting graphene for high-rate and long-lifespan sodium ion batteries

Dual-Carbon Coated Na3v2(Po4)3 Derived from Reduced Graphene Oxide and Nanocellulose with Porous Structure for High Performance Sodium-Ion Batteries

Coating a Na3V2(PO4)3 cathode material with carbon to improve its sodium storage

Superior conductivity and accelerated kinetics Na3V2(PO4)2F3@CNTs with high performance for sodium-ion batteries

Synthesis and Electrochemical Performances of Na3V2(PO4)2F3/C Composites As Cathode Materials for Sodium Ion Batteries.

3D interconnected porous carbon coated Na3V2(PO4)3/C composite cathode materials for sodium-ion batteries

Nitrogen-Doped Carbon Coated Na 3 V 2 (PO 4 ) 2 F 3 Derived from Polyvinylpyrrolidone as a High-Performance Cathode for Sodium-Ion Batteries

Nitrogen-Doped Carbon Coated Na3V2(PO4)2F3 Derived from Polyvinylpyrrolidone as a High-Performance Cathode for Sodium- Ion Batteries

N-doped dual carbon-layer-modified Na3V2(PO4)3 as a high-performance cathode material for sodium-ion batteries

Unveiling Zn substitution and carbon nanotubes enwrapping in Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> with high performance for sodium ion batteries: Experimental and theoretical study

Unveiling Zn substitution and carbon nanotubes enwrapping in Na3V2(PO4)3 with high performance for sodium ion batteries: Experimental and theoretical study

The N-doped Carbon Coated Na3V2(PO4)3 with Different N Sources As Cathode Material for Sodium-Ion Batteries: Experimental and Theoretical Study

Nitrogen-Doped Carbon Coated Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>2</sub>F<sub>3</sub> Derived from Polyvinylpyrrolidone as a High-Performance Cathode for Sodium-Ion Batteries

Construction of simultaneous modified Na<sub>3</sub>V2(PO<sub>4</sub>)<sub>3</sub>/C cathode with K/Zr substitution and carbon nanotubes enwrapping for high performance sodium ion battery

Research Progress on Electrochemical Properties of Na3V2(PO4)3 As Cathode Material for Sodium-Ion Batteries

Synergistically Boosting Sodium-Storage Performance of Na3V2(PO4)3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Synergistically Boosting Sodium-Storage Performance of Na 3 V 2 (PO 4 ) 3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Construction of Na3V2(PO4)2F3@C/C NTs Nanocomposites with Three-Dimensional Conductive Network As Cathode Materials for Sodium-Ion Batteries

Diatomic Doped Carbon Coating Boosting the High-Rate Performance and Super Long-Cycle Stability of Na3v2(Po4)3 Cathode Material

Reversible Na+-extraction/insertion in nitrogen-doped graphene-encapsulated Na3V2(PO4)2F3@C electrode for advanced Na-ion battery