Abstract:In this work, the coupled phase field-crystal plasticity constitutive framework proposed in a companion publication [G. Abrivard, E. P. Busso, S. Forest and B. Apolaire, Phil. Mag. (2012) (this issue)] is applied to study the microstructural evolution driven by grain boundary curvature and/or stored energy. Different microstructures involving bicrystals and polycrystals of pure Al are studied and the results compared against experimental data and known analytical solutions. First, the study of a bicrystal with only curvature as the driving force for boundary migration enables the model to reproduce the different mobilities between low and high angle grain boundaries in the absence of Sigma-type boundaries, and to identify the threshold misorientation below which the mobility is negligible. The growth of a small dislocation-free grain embedded within a highly deformed one is considered having both curvature and stored energy as the competing driving forces. A parametric study enabled the effect of the initial size of the nucleus on the minimum level of stored energy required for grain migration to be quantified. Finally, a study of recrystallisation and grain growth phenomena on a representative polycrystal aggregate revealed that grains with the lowest stored energy are dominant at the end of the recrystallisation process. The predicted recrystallised material volume fraction evolution and the kinetics of recrystallisation and grain growth were found to have the same dependence on deformation levels and temperature as those reported in the literature. Several outstanding modelling issues are identified and suggestions for further developments are discussed.

Multi-Phase Equilibrium of Crystalline Solids

Hydrodynamic phase field crystal approach to interfaces, dislocations, and multi-grain networks

A Phase-Field-crystal Alloy Model for Late-Stage Solidification Studies Involving the Interaction of Solid, Liquid and Gas Phases.

Minimal Phase-Field Crystal Modeling Of Vapor-Liquid-Solid Coexistence And Transitions

Modeling of materials capable of solid–solid phase transformation. Application to the analytical solution of the semi-infinite mode III crack problem in a phase-changing solid

Multi-phase-field analysis of short-range forces between diffuse interfaces

Phase Field Modelling of Grain Boundary Motion Driven by Curvature and Stored Energy Gradients. Part I: Theory and Numerical Implementation

A multi-phase field model for mesoscopic interface dynamics with large bulk driving forces

A Multiscale Approach for Modeling Crystalline Solids

Phase Reentrances and Solid Deformations in Confined Colloidal Crystals

Thermodynamic Relationships for Bulk Crystalline and Liquid Phases in the Phase-Field Crystal Model

Phase Field Model for Non-equilibrium Interface Conditions

A variational framework for Cahn–Hilliard-type diffusion coupled with Allen–Cahn-type multi-phase transformations in elastic and dissipative solids

Phase field crystal modeling as a unified atomistic approach to defect dynamics

Mesoscale modeling of deformations and defects in thin crystalline sheets

Dislocation dynamics and crystal plasticity in the phase field crystal model

Phase Field Modelling of Grain Boundary Motion Driven by Curvature and Stored Energy Gradients. Part Ii: Application to Recrystallisation

A coupled model of diffusional creep of polycrystalline solids based on climb of dislocations at grain boundaries

Elasticity versus phase field driven motion in the phase field crystal model

Multiscale Boundary Conditions in Crystalline Solids: Theory and Application to Nanoindentation

Generalizing the structural phase field crystal approach for modeling solid-liquid-vapor phase transformations in pure materials