Abstract:Due to unique natural characteristics such as biocompatibility, nontoxicity, mechanical stability, and high moisture content, bacterial cellulose can be efficiently used for the production of new medical materials, including various wound dressings. Bacterial cellulose can be produced by bacteria of the genera Gluconaceto-bacter, Aerobacter, Rhizobium and others. Under static cultivation conditions, the producers form gel films of bacterial cellulose, which differ in their properties. Bacterial cellulose does not possess inherent antimicrobial activity; therefore, bacterial cellulose films must be further enhanced before they are used as medical materials. In order to improve the properties of BC, researchers use various modification methods to introduce antimicrobial activity. The main attention is paid to the post-synthetic modification: in this concept, in order to impart antimicrobial properties to bacterial cellulose it is saturated with antibiotics or other antibacterial and antifungal drugs. To improve the sorption properties, successful attempts were made to oxidize BC and then to saturate it with an antibiotic. The introduction of new reactive functional groups to the surface of bacterial cellulose fibers will make it possible to better control the sorption process and increase the saturation of films with antibacterial drugs. The purpose of this work was to determine the effect of bacterial cellulose treatment during oxidation in the TEMPO/NaClO/NaBr system on the properties of oxidized samples, i.e., an increase in the sorption capacity with respect to a biologically active compound. Films were obtained under conditions of stationary cultivation of the strain Gluconacetobacter hansenii GH 1/2008 (VKPM B-10547) on glucose and fructose carbon sources. Chloramphenicol, a broad-spectrum antibiotic, was chosen as a model antibiotic with which the films were saturated. The resulting films did not differ significantly in terms of thickness, water-holding capacity, and dry weight (see Table 1). Derivatives of BC gel films were obtained without destroying the native three-dimensional gel structure using an oxidative process catalyzed by the nitroxyl radical TEMPO (2,2,6,6-tetramethylpiperidin-1-yl)oxyl). Depending on the oxidation conditions, a series of gel films functionalized with carboxyl groups (COOH) were obtained with a total content of COOH groups varying in a wide range from 0.041 to 0.219 mmol/g (see Fig. 2В). It was shown for the first time that the content of COOH groups depends on the quality of films synthesized on various carbon sources: the maximum degree of carboxylation was noted for films synthesized by G. hansenii on fructose, which is apparently associated with differences in the supramolecular structure of cellulose (see Fig.2B and 3). For the obtained gel films, the sorption capacity with respect to the antibacterial drug chloramphenicol (CP) was evaluated. A direct relationship was established between the sorption value and the amount of COOH groups in the films. The amount of sorption of the antibiotic depends on the degree of carboxylation of the sample (see table 3). Thus, the functionalization of the surface of bacterial cellulose gel films with carboxyl groups leads to an increase in their sorption properties. Indeed, the amount of antibiotic absorbed by the oxidized films is several times higher as opposed to the non-oxidized gel films. The obtained results demonstrate the benefits of carrying out the process of oxidation of bacterial cellulose films, increasing the degree of their saturation with antimicrobial agents and the possibility of their further use for medical purposes as a dressing material. The article contains 7 Figures, 3 Tables and 26 References.

Synthesis of Highly Antioxidative and Antibacterial Grafted Microcrystalline Cellulose

Preparation, characterization and antibacterial properties of 4-aminocinnamic acid-modified cellulose fibers

Synthesis and characterization of cellulose derivatives for enhanced antimicrobial activity

High-efficacy and long term antibacterial cellulose material: anchored guanidine polymer via double “click chemistry”

Chemical Modification of Bacterial Cellulose for the Development of an Antibacterial Wound Dressing

Preparation of benzothiocyanine‐carboxymethyl cellulose composite film and its antimicrobial properties

Novel Hyperbranched Dialdehyde Carboxymethyl Cellulose-Grafted Gelatin Films as Potential Natural Antibacterial Materials

Antibacterial Films Made of Bacterial Cellulose

Enhancing plant fiber antibacterial and antiviral performance through synergistic action of amino and sulfonic acid groups

Silver-reinforced cellulose hybrids with enhanced antibacterial activity: synthesis, characterization, and mechanism

Synthesis and characterization of zinc-titanium oxide nanoparticles blended methylcellulose derived from Albizia tree as an antibacterial natural polymer composite

High mechanical property and antibacterial poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/functional enzymatically-synthesized cellulose biodegradable composite

Synthesis and characterization of Ag@AgCl-reinforced cellulose composites with enhanced antibacterial and photocatalytic degradation properties

Versatile synthesis of cellulose film with excellent electrothermal/photothermal dual responsiveness by introducing MXene and small molecule self-assembled nanosphere

One-pot synthesis of PAMAM-grafted hyperbranched cellulose towards enhanced thermal stability and antibacterial activity

Modifications of microcrystalline cellulose (MCC), nanofibrillated cellulose (NFC), and nanocrystalline cellulose (NCC) for antimicrobial and wound healing applications

Fabrication of bacterial cellulose composites with antimicrobial properties by in situ modification utilizing the specific function-suspension containing water-insoluble magnolol

Biosynthesis and characterization of antibacterial bacterial cellulose composite membrane composed of montmorillonite and exopolysaccharides

Improving the compatibility, surface strength, and dimensional stability of cellulosic fibers using glycidyl methacrylate grafting

A Review on Surface-Functionalized Cellulosic Nanostructures as Biocompatible Antibacterial Materials

Evaluation of the Sorption Capacity of Functionalized Bacterial Cellulose Gel Films with Respect to Chloramphenicol