Abstract:Pulsed power systems can deliver high peak power in a micro/nano-second timescale to various loads in scientific and industrial applications, whose performances are significantly influenced by the pulsed discharge switch. This article presents the development and comprehensive tests of a miniaturized sealed-off pseudospark switch. The structure of double-gap and multi-channel is adopted to achieve the high hold-off voltage and high current capacity. In single pulse tests, the influence of pressure in the switch is analyzed. As the pressure increases, values of multiple parameters decrease, like self-breakdown voltage, trigger delay, and voltage dropping time. In a wide pressure range, trigger jitter is below 3 ns, and the minimum is <1 ns. At low pressure, the transient voltage across two gaps becomes inconsistent, and two types of current quenching are observed, which are related to processes occurring on cathode surface. In repetitive pulse tests, the direct repetitive operation is up to 3.5 kHz while higher repetition rate is limited by the trigger system. In double-pulse tests, the maximum repetition rate can be higher than 8 kHz for 40 kV pulsed voltage. Meanwhile, the insulation recovery speed is higher at lower pressure, and as the time delay between two pulses increases, the second pulse breakdown voltage increases nonlinearly. In high current tests, the switch is also used in metal wire explosion experiments and operates at the condition of 30 kV/40 kA for more than 104 shots without performance degradation. Further lifetime tests point out that the switch can work for >106 shots stably at moderate current. Experiments prove that the designed switch has superior performances including high hold-off voltage (>50 kV), low jitter (<1 ns), high repetition rate (>3.5 kHz), high peak current (>40 kA), long lifetime (>106 shots) and miniaturized size.

Study on Underwater Nanosecond Surface Discharge Driven by Magnetic-switch-based Repetitive Pulsed Power Supply

Research on Pulsed Plasma Source and Its Application in the Marine Seismic Prospecting

Electroacoustic Process Study of Plasma Sparker under Different Water Depth

The Effect of the Configuration of a Single Electrode Corona Discharge on Its Acoustic Characteristics

The electro-acoustic transition process of pulsed corona discharge in conductive water

Pulsed Corona Generation Using a High-Power Semiconductor Diode Switch

Plasma Seismic Source and Its Application in Oceanic Seismic Exploration

Repetitive pulsed power to serve nanotechnology, sustainability and hydrogen production

Experimental Study of the Electric Pulse-Width Effect on the Acoustic Pulse of a Plasma Sparker

Underwater sound source based on pulsed corona discharge

A Compact Repetitive Unipolar Nanosecond-Pulse Generator for Dielectric Barrier Discharge Application

Spectral diagnosis of underwater microsecond high-current pulsed discharge plasma

Discharge Characteristic of Nanosecond-Pulse Dbd in Atmospheric Air Using Magnetic Compression Pulsed Power Generator

An All-Solid-State Pulsed Power Generator for Non-Thermal Plasma Discharge Applications 1

Nanosecond-pulse dielectric barrier discharge using magnetic compression solid-state pulsed power

A Comparative Study of Water Electrodes Versus Metal Electrodes for Excitation of Nanosecond-Pulse Homogeneous Dielectric Barrier Discharge in Open Air

Underwater electrical wire explosions under different discharge types: An experimental study with high initial energy storage

A Miniaturized Sealed-Off Double-Gap Pseudospark Switch for High Power and High Repetition Rate Pulsed Discharge Applications

Investigation of the Microsecond-Pulse Acoustic Wave Generated by a Single Nanosecond-Pulse Discharge

Characteristics of annular surface dielectric barrier discharge with microsecond pulse under water-covered condition

New Prototype of Underwater Sound Source Based on the Pulsed Corona Discharge