Abstract:In order to study the energy loss of bi-directional hydraulic machinery under cavitation conditions, this paper uses high-speed photography combined with six-axis force and torque sensors to collect cavitating flow images and lift signals of S-shaped hydrofoils simultaneously in a cavitation tunnel. The experimental results show that the stall angle of attack of the S-shaped hydrofoil is at ±12° and that the lift characteristics are almost symmetrical about +1°. Choosing α = +6° and α = −4° with almost equal average lift for comparison, it was found that both cavitation inception and cloud cavitation inception were earlier at α = −4° than at α = +6°, and that the cavitation length at α = −4° grew significantly faster than at α = +6°. When α = +6°, the cavity around the S-shaped hydrofoil undergoes a typical cavitation stage as the cavitation number decreases: from incipient cavitation to sheet cavitation to cloud cavitation. However, when α = −4°, as the cavitation number decreases, the cavitation phase goes through a developmental process from incipient cavitation to sheet cavitation to cloud cavitation to sheet cavitation to cloud cavitation, mainly because the shape of the S-shaped hydrofoil at the negative angle of attack affects the flow of the cavity tails, which is not sufficient to form re-entrant jets that cuts off the sheet cavitation. The formation mechanism of cloud cavitation at the two different angles of attack (α = +6°、−4°) is the same, both being due to the movement of the re-entrant jet leading to the unstable shedding of sheet cavity. The fast Fourier analysis reveals that the fluctuations of the lift signals under cloud cavitation are significantly higher than those under non-cavitation, and the main frequencies of the lift signals under cloud cavitation were all twice the frequency of the cloud cavitation shedding.

An experimental study on the impact behavior of cavitation inside tip clearance of a hydrofoil

Experiment Investigation of the Tip Vortex Cavitation Around a Pitching Hydrofoil

Experimental Study On Cavitation Over A Flat Hydrofoil With Obstacle

On Cavitation Caused by Tip Clearance of a Flat-Plate Hydrofoil

Experimental and Numerical Studies on the Cavitation over Flat Hydrofoils with and Without Obstacle

Numerical Study of Porous Tip Treatment in Suppressing Tip Clearance Vortices in Cavitating Flow

Inhibition of Cloud Cavitation on a Flat Hydrofoil Through the Placement of an Obstacle

Cavitation morphology and erosion on hydrofoil with slits

Numerical and Experimental Study on Unsteady Shedding of Partial Cavitation

Large-eddy Simulation of Tip Clearance Cavitating Flow Around a Hydrofoil

Experimental Investigation of Tip Vortex Cavitation Noise under Static and Dynamic States

Effect of Tip Clearance on the Cavitation Performance of High-Speed Pump-Jet Propeller

Impact of re-entrant jet and shedding cloud cavity on the distribution of cavitation erosion

Dynamics of cavitating tip vortex

Numerical prediction of cavitation nuisance on hydrofoils: Combined analysis of cavity dynamics and the aggressiveness of collapsing cavitating structures

Assessment of cavitation erosion risk indicated by pressure impact exceeding material strength threshold

Experimental Study on the Relationship Between Cavitation and Lift Fluctuations of S-Shaped Hydrofoil

Numerical study of the hydrodynamic performances of surface piercing propeller

The Effect of Cavitation on the Hydrofoil Dynamic Characteristics

Large Eddy Simulation on the Cavitation Flow and Noise Characteristics of a NACA0009 Hydrofoil With Different Tip Clearance Sizes

Effects of tip clearance size on vortical structures and turbulence statistics in tip-leakage flows: A direct numerical simulation study