Abstract:This research demonstrates how combining cost‐effective dimensionality engineering and mechanical scribing strategies can enhance the efficiency, stability, and scalability of planar perovskite solar cells (PSCs) and modules (PSMs). The mechanically‐scribed PSMs have achieved a high power conversion efficiency of ≈20.6% with a total power output of ≈270 mW at an active area of 13.0 cm2. The performance and scalability of perovskite solar cells (PSCs) based on 3D formamidinium lead triiodide (FAPbI3) absorber are often hindered by defects at the surface and grain boundaries of the perovskite. To address this, the study demonstrates the use of pyrrolidinium iodide for the in situ formation of an energetically aligned 1D pyrrolidinium lead triiodide (PyPbI3) capping layer over the 3D FAbI3 perovskite. The thermodynamically stable PyPbI3 perovskitoids, formed through cation exchange reactions, effectively reduce surface and grain boundary defects in the FAPbI3 perovskite. In addition to improved phase stability, the resulting 1D/3D perovskite film forms a cascade energy band alignment with the other functional layers in PSCs, enabling a barrier‐free interfacial charge transport. With a maximum power conversion efficiency (PCE) of ≈23.1% and ≈20.7% at active areas of 0.09 and 1.05 cm2, respectively, the 1D/3D PSCs demonstrate excellent performance and scalability. Leveraging this improved scalability, the study has successfully developed a mechanically‐scribed 1D/3D perovskite mini‐module with an unprecedentedly high PCE of ≈20.6% and a total power output of ≈270 mW at an active area of ≈13.0 cm2. The 1D/3D multi‐dimensional perovskite film developed herein holds great promise for producing low‐cost, high‐performance perovskite photovoltaics at both the cell and module levels.

Fabrication of efficient perovskite solar mini‐modules with a high geometric fill factor of 96% via a nano‐second laser

Beyond 99.5% Geometrical Fill Factor in Perovskite Solar Minimodules with Advanced Laser Structuring

Fabrication and challenges for high-efficiency and up-scale perovskite solar modules

Closing the Cell-to-Module Efficiency Gap: A Fully Laser Scribed Perovskite Minimodule With 16% Steady-State Aperture Area Efficiency

Can Nanosecond Laser Achieve High‐Performance Perovskite Solar Modules with Aperture Area Efficiency Over 21%?

Low‐Cost, Scalable Fabrication of Multi‐Dimensional Perovskite Solar Cells and Modules Assisted by Mechanical Scribing

Reducing Losses in Perovskite Large Area Solar Technology: Laser Design Optimization for Highly Efficient Modules and Minipanels

Scalable Fabrication of High‐Performance Perovskite Solar Cell Modules by Mediated Vapor Deposition

Highly Efficient Perovskite Solar Modules by Scalable Fabrication and Interconnection Optimization

How to fabricate efficient perovskite solar mini-modules in lab

Laser Processing Optimization for Large-Area Perovskite Solar Modules

Nonthermal laser ablation of high-efficiency semitransparent and aesthetic perovskite solar cells

Laser-Scribing Optimization for Sprayed SnO2-Based Perovskite Solar Modules on Flexible Plastic Substrates

Scalable Fabrication of >90 Cm2 Perovskite Solar Modules with >1000 H Operational Stability Based on the Intermediate Phase Strategy

Laser Patterning Technology Based on Nanosecond Pulsed Laser for Manufacturing Bifacial Perovskite Solar Modules

High‐Pressure Nitrogen‐Extraction and Effective Passivation to Attain Highest Large‐Area Perovskite Solar Module Efficiency

Fabrication of High-Efficiency Perovskite Solar Cells and Mini-Modules by Expanding the Processing Window with KSCN Additive

Laser Scribing for Perovskite Solar Modules of Long‐Term Stability

Research progress on large-area perovskite thin films and solar modules