Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Functionalization of Zr@FMA with phosphonic acid groups for efficient separation of Th(iv) from aqueous solutions

Efficient Separation of Th(IV) from Highly Acidic Solution by Microporous Resin Materials Containing Two Novel Phenanthroline Phosphonates

Alkali-Treated Yttrium-Containing Chitosan-Based Hydrogel Beads for Phosphate Removal from Aqueous Solutions

Alkali-treated Yttrium-Containing Chitosan-Based Hydrogels for Phosphate Recover with Highly Selective in Wide Ph Aqueous Solution

Facile preparation of dual La-Zr modified magnetite adsorbents for efficient and selective phosphorus recovery

Efficient Sorption of Th(IV) from Aqueous Solutions Onto Magnetic Chitosan Nano-Particles Functionalized with Alanine and Valine

Highly efficient adsorption of thorium (IV) from aqueous solutions by functionalized UiO-66 with abundant phosphonic acid active sites

Highly Selective Removal of Thorium from Acidic Solutions Achieved on Phosphonic Acid Functionalized Core–shell Magnetic Nanocomposite: Understanding Adsorption and Binding Mechanisms

Adsorption of Thorium (IV) Ions from Aqueous Solution by Magnetic Chitosan Resins Modified with Triethylene-Tetramine

Carboxyl-functionalized UiO-66-NH2 for Efficient Capture of Th(IV) in Aqueous Solution: Experimental and DFT Study

Effective adsorption of thorium ion by novel self-crosslinking polyamide acid-grafted magnetic nanocomposites

Carboxyl-functionalized UiO-66-NH 2 for efficient capture of Th(IV) in aqueous solution: Experimental and DFT study

Zwitterionic ammonium-sulfonato grafted cellulose for efficient thallium removal and adsorption mechanism study

The Study of Amidoxime-Functionalized Cellulose Separate Th(IV) from Aqueous Solution

Phosphate adsorption on amorphous aluminum hydroxide-yielded transition aluminas: Insights on fundamental chemistry and making engineering adsorbents

Zirconia Functionalized Sba-15 As Effective Adsorbent for Phosphate Removal

Synthesis and characterization of poly(TRIM/VPA) functionalized graphene oxide nanoribbons aerogel for highly efficient capture of thorium(IV) from aqueous solutions

Efficient Capture of Phosphate From Aqueous Media Using Bimetallic La‐Zr‐MOF

Preparation of Phosphoric Acid-Functionalized SBA-15 and Its High Efficient Selective Adsorption Separation of Lanthanum Ions

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Functionalization of cellulose pentamine as a promising nano‐amorphous sorbent for Zr(IV) and Hf(IV) ions recovery