Abstract:Abstract Background Exoskeletons are working in parallel to the human body and can support human movement by exerting forces through cuffs or straps. They are prone to misalignments caused by simplified joint mechanics and incorrect fit or positioning. Those misalignments are a common safety concern as they can cause undesired interaction forces. However, the exact mechanisms and effects of misalignments on the joint load are not yet known. The aim of this study was therefore to investigate the influence of different directions and magnitudes of exoskeleton misalignment on the internal knee joint forces and torques of an artificial leg. Methods An instrumented leg simulator was used to quantify the changes in knee joint load during the swing phase caused by misalignments of a passive knee brace being manually flexed. This was achieved by an experimenter pulling on a rope attached to the distal end of the knee brace to create a flexion torque. The extension was not actuated but achieved through the weight of the instrumented leg simulator. The investigated types of misalignments are a rotation of the brace around the vertical axis and a translation in anteroposterior as well as proximal/distal direction. Results The amount of misalignment had a significant effect on several directions of knee joint load in the instrumented leg simulator. In general, load on the knee joint increased with increasing misalignment. Specifically, stronger rotational misalignment led to higher forces in mediolateral direction in the knee joint as well as higher ab-/adduction, flexion and internal/external rotation torques. Stronger anteroposterior translational misalignment led to higher mediolateral knee forces as well as higher abduction and flexion/extension torques. Stronger proximal/distal translational misalignment led to higher posterior and tension/compression forces. Conclusions Misalignments of a lower leg exoskeleton can increase internal knee forces and torques during swing to a multiple of those experienced in a well-aligned situation. Despite only taking swing into account, this is supporting the need for carefully considering hazards associated with not only translational but also rotational misalignments during wearable robot development and use. Also, this warrants investigation of misalignment effects in stance, as a target of many exoskeleton applications.

Reconstruction of occluded pelvis markers during marker-based motion capture with industrial exoskeletons

Flexible sensor-based biomechanical evaluation of low-back exoskeleton use in lifting

Biomechanical Assessment of Exoskeleton Intervention for Injured and Recovering Workers: A Simulation Study of Bending Tasks

Musculoskeletal models determine the effect of a soft active exosuit on muscle activations and forces during lifting and lowering tasks

Implementing an accelerometer-based pelvis segment for low back kinetic analyses during dynamic movement tasks

Skin marker-based subject-specific spinal alignment modeling: A feasibility study

A Passive Back-Support Exoskeleton for Manual Materials Handling: Reduction of Low Back Loading and Metabolic Effort during Repetitive Lifting

How reliable are femoropelvic kinematics during deep squats? The influence of subject-specific skeletal modelling on measurement variability

Development and Evaluation of a Lumbar Assisted Exoskeleton With Mixed Lifting Tasks by Various Postures

Effect Analysis of Wearing an Lumbar Exoskeleton on Coordinated Activities of the Low Back Muscles Using sEMG Topographic Maps

Active exoskeleton reduces erector spinae muscle activity during lifting

Towards Wearable Electromyography for Personalized Musculoskeletal Trunk Models using an Inverse Synergy-based Approach

Evaluation of an acceleration-based assistive strategy to control a back-support exoskeleton for manual material handling

Inclusion of a skeletal model partly improves reliability of lower limb joint angles during a wide range of movement assessments recorded using a markerless depth camera

The effect of a soft active back support exosuit on trunk motion and thoracolumbar spine loading during squat and stoop lifts

Static and dynamic error of a biplanar videoradiography system using marker-based and markerless tracking techniques.

Assessing effects of exoskeleton misalignment on knee joint load during swing using an instrumented leg simulator

Biomechanical analysis based on a full-body musculoskeletal model for evaluating the effect of a passive lower-limb exoskeleton on lumbar load

Assessment of a passive wearable robot for reducing low back disorders during rebar work

Multibody dynamics and optimal control for optimizing spinal exoskeleton design and support

Evaluation of a passive back-support exoskeleton during in-bed patient handling tasks