Abstract:Abstract Today, rare-earth elements are mainly introduced in alloys in the form of misch metal, which is a natural mixture of rare-earth elements (with atomic numbers 57–71). This mixture contains about 50 wt % cerium. The primary components of the mixture are generally cerium, lanthanum, and niobium. The specific composition depends on the particular field from which they were drawn. The variable composition of this mixture may significantly impair its effectiveness in alloying. The ratio of the individual elements in the mixture cannot be determined experimentally for each grade of steel, because of the prohibitive expense of such separation. However, thermodynamic modeling permits determination of the optimal concentration of each rare-earth element and the composition of the misch metal. In the present work, thermodynamic modeling is applied to the interaction of magnesium, aluminum, and lanthanum with oxygen in liquid iron. The thermodynamic model of the reduction of steel by mixtures of such active metals is considered. On the basis of literature data regarding the phase diagrams of the MgO–Al 2 O 3 , MgO–La 2 O 3 , and La 2 O 3 –Al 2 O 3 systems, the coordinates of points of invariant equilibrium in the MgO–La 2 O 3 –Al 2 O 3 system are established. The MgO–La 2 O 3 –Al 2 O 3 phase diagram is plotted. That permits the identification of all possible equilibria in the reduction of steel by magnesium, aluminum, and lanthanum and also the determination of corresponding descriptive equations. The activity of the components in liquid oxide melts is determined by the theory of subregular ionic solutions, taking account of the influence of the oxide melt’s composition on the coordination number of the cations. The activity of the components in metallic melts that are conjugate with the oxide systems is determined by means of the Wagner theory on the basis of first-order reaction parameters. The equilibrium constants of the reduction of steel by the given elements are established by indirect thermodynamic calculations. On the basis of the results, the solubility surface of the components in Fe–Mg–Al–La–O melts is constructed. That permits the identification of regions where the composition of the liquid metal corresponds to a particular oxide phase.

Assessment of Equilibrium between Yttrium and Oxygen in Liquid Iron

Oxidation Mechanism of Three Fe-Al Alloys with and Without Addition of 0.1 At% Yttrium at 800 °C

Dissolution Equilibrium Of Iron Vapour And Activities Of Iron In Liquid Uranium-Iron Solutions

Y2O3‒SiO2 SYSTEM DIAGRAM

Thermodynamic analysis of processes in the high-temperature polycomponent Fe–Y–Si–O–C system

Phase Equilibrium Investigations and Thermodynamic Study of the Y2O3-Ta2O5 System

Thermodynamic evaluation for reduction of iron oxide ore particles in a high temperature drop tube furnace

Aluminum Deoxidation Equilibria in Liquid Iron: Part II. Thermodynamic Modeling

Thermodynamics of the Interactions in Fe–Mg–Al–La–O Melts

Measurement of the phase equilibria in the Al–Zr–Y system at 673 and 823 K

THERMODYNAMICS OF THE PROCESSES OF INTERACTION OF LIQUID METAL COMPONENTS IN Fe – Mg – Al – La – O SYSTEM

Assessment of phase equilibria and thermodynamic properties in the Fe-RE (RE = rare earth metals) binary systems

Experimental determination and thermodynamic calculation of phase equilibria in Ag-Zr-Y system

Oxygen in the Earth's core: a first principles study

Kinetics Study of Solvent and Solid-Phase Extraction of Rare Earth Metals with Di-2-Ethylhexylphosphoric Acid

Phase equilibria in the ZrO2-GdO1.5-TaO2.5 system at 1500 °C

The Effect of Y/Ti Ratio on Oxide Precipitate Evolution in ODS Fe-14 Wt Pct Cr Alloys

Effect of yttrium on the cyclic oxidation behaviour of HP40 heat-resistant steel at 1373K

Thermodynamic Data of Separating Yttrium from Heavy Rare Earths via a Phenoxypropionate-Based Ionic Liquid

Linear correlations of Gibbs free energy for rare earth element oxide, hydroxide, chloride, fluoride, carbonate, and ferrite minerals and crystalline solids

Influence of Yttrium on the Interface Valence Electron Density of Thermal Barrier Coatings