Abstract:The share of buildings in energy consumption and global greenhouse gas emissions is significant. Lime mortars are common in traditional architecture, but due to their mechanical disadvantages compared to cement, they were excluded from modern constructions. It can significantly contribute to environmental sustainability by replacing modified lime mortars with common cement mortars, particularly in the building envelope system. Conventional lime-based roof pastes (LRP) are multilayer complicated systems composed of various ingredients and binders; their physical properties define the function of LRPs: interact connection, underlayer contact, and external variables. Lime pastes sets as a durable and generally flexible solid mass. It is breathable and permits the transfer and evaporation of moisture. It is less susceptible to water and won't dry or disintegrate, unlike clay or gypsum paste. Pastes made of hydrated lime are less brittle and breakable, and as building insulation materials (Bims), a lime-based paste is used against environmental concerns. Microstructure and material characterization tests, compressive strength, and strain were used to identify, characterize, and evaluate the LRP. The dispersive energy X-ray (EDX) and X-ray fluorescence (XRF) indicated that LRP is composed of two main compounds, SiO 2 and CaO, which are primarily converted to calcium silicate and calcium carbonate during the hydration process. The thermogravimetric analysis (TGA) findings demonstrated that the material exhibited high thermal stability up to 200 °C and 11.4% weight loss at 975 °C, demonstrating the high heat capacity of the LRP and fire resistance. At 28 days of curing, the compressive strength of the LRP with water to binder ratio (w/b) of 0.75 and 0.60 was 0.761 and 1.094 MPa, respectively. The stress-strain relationships of the LRP were predicted using three independent mathematical models, including the rational, β, and Vipulanandan p-q models. Based on the coefficient of determination R 2 and root mean square error (RMSE), the best model for predicting the compression stress-strain behavior of the LRP at various w/b and curing times was the Vipulanandan p-q model.

Closure to "Expansive and Compressibility Behavior of Lime Stabilized Fiber-Reinforced Marine Clay" by Vihan Shenal Jayawardane, Vivi Anggraini, Endene Emmanuel, Lee Li Yong, and Mehdi Mirzababaei

Effects of Natural Seawater and Sea Sand on the Compressive Behaviour of Unconfined and Carbon Fibre-Reinforced Polymer-Confined Concrete

Expansive and Compressibility Behavior of Lime Stabilized Fiber-Reinforced Marine Clay

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Improvement of Marine Clay Soil Using Lime and Alkaline Activation Stabilized with Inclusion of Treated Coir Fibre

Experimental Study on Engineering Properties of Fibre-Lime Treated Soils

Mechanics, hydration phase and pore development of embodied energy and carbon composites based on ultrahigh-volume low-carbon cement with limestone calcined clay

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

Performance Evaluation and Microstructural Assessment of Industrial Solid Waste as Sustainable Additives for Expansive Soil

Failure evolution and instability prediction of fiber-reinforced polymer-confined cement mortar specimens under axial compression

Investigating the impact of vinyl acetate-ethylene polymer on the mechanical and microstructural properties of expansive clay subgrade

Utilization of Cementitious Material from Residual Rice Husk Ash and Lime in Stabilization of Expansive Soil

Microstructure and chemo-physical characterizations, thermal properties, and modeling of the compression stress-strain behavior of lime-based roof and screed paste

Optimization of physical and strength performance of cellulose-based fiber additives stabilized expansive soil

Engineered cementitious composites using blended limestone calcined clay and fly ash: Mechanical properties and drying shrinkage modeling

A laboratory investigation and numerical modeling on fiber reinforced lime and alkaline binder stabilized pavement subgrade soil

The Effect of Low Velocity Impact Loading on Self-Compacting Concrete Reinforced with Carbon Fiber Reinforced Polymers

Durability and Swelling of Solidified/Stabilized Dredged Marine Soils with Class-F Fly Ash, Cement, and Lime

Mitigation of lack of fusion in 3D printed limestone calcined clay cement concrete induced by effective microorganisms

Shrinkage of blended cement concrete with fly ash or limestone calcined clay

Physicochemical and Engineering Behavior of Cement Treated Clays