Abstract:Abstract The sCO2-4-NPP european project aims to develop an innovative technology based on supercritical CO2 (sCO2) for heat removal to improve the safety of current and future nuclear power plants. The heat removal from the reactor core will be achieved with multiple highly compact self-propellant, self-launching, and self-sustaining cooling system modules, powered by a sCO2 Brayton cycle. Heat exchangers are one of the key components required for advanced Brayton cycles using supercritical CO2. Fives Cryo company, a brazed plates and fins heat exchangers manufacturer, with its expertise in thermal and hydraulic design and brazing fabrication is developing compact, and highly efficient stainless steel heat exchanger solution for sCO2 power cycles, thanks to their heat exchange capability with low pinch and high available flow sections. The aim of the development of this specific heat exchanger technology is to achieve an elevated degree of regeneration. For this matter, plates and fins heat exchanger is a very interesting solution to meet the desired thermal duty with low pressure drop leading to a reduction in size and capital cost. The enhancement of the mechanical integrity of plates and fins heat exchanger equipment would lead to compete with, and even outweigh, printed circuit heat exchangers technology, classically used for sCO2 Brayton cycles. sCO2 cycle conditions expose heat exchangers to severe conditions. Base material selection is essential, and for cost reasons, it is important to keep affordable heat-resistant austenitic stainless steel grades, much cheaper than a nickel-based alloy. Another advantage of high compactness of plates and fins heat exchangers is the diminution of the amount of material used in the heat exchanger manufacturing, decreasing even more its cost. The challenge here is to qualify stainless steel plates and fins heat exchangers mechanical resistance, at cycle operating conditions, and meet with pressure vessels codes and regulations according to nuclear requirements. One critical point in the development of the heat exchangers is the design of the fins. As secondary surface, they allow the maximization of heat transfer at low pressure drop. At the same time mechanical strength has to be guaranteed. To withstand high pressure, fins thickness has to be significant, which makes the implementation complicated. Efforts were dedicated to successfully obtain an optimal shape. Forming of fins was therefore improved compared to conventional techniques. Important work was undertaken to define industrial settings to flatten the top of the fins leading to a maximum contact between the brazing alloy and the fins. Consequently brazed joints quantity is minimized inducing a diminution of the presence of eutectic phase, which is structurally brittle and limits the mechanical strength of the construction. A metallurgical study brings other elements leading to the prevention of premature rupture of the brazed structure. The idea is to determine an optimized solidification path and to identify a temperature range and holding time where the brazed joint is almost free of eutectic phase during the assembly process in the vacuum furnace.

In-house C massecuite reheater: a successful development for Le Gol sugar factory

Assessment of the Feasibility of Converting the Liquid Fraction Separated from Fruit and Vegetable Waste in a UASB Digester

Removing Sludge from B Molasses at the Providencia Sugar Mill Distillery: Performance Evaluation and Proposed Operating Alternative

Retrofitting of A Distillery Based on Process Synthesis

Coking Wastewater Treatment for Industrial Reuse Purpose: Combining Biological Processes with Ultrafiltration, Nanofiltration and Reverse Osmosis

Industrial Technical Development and Qualification of Highly Efficient Stainless Steel Plates and Fins Heat Exchanger for Heat Removal Supercritical CO2 Brayton Cycle Applied to Nuclear Power Plants

Process Optimization of an In-Situ Bioleaching Section with Associated Membrane Filtration in a Field Test Laboratory

Multi-objective optimization of the organic Rankine cycle cascade refrigeration cycle driven by sugar mills waste heat

On-Site Experimental Study on Low-Temperature Deep Waste Heat Recovery of Actual Flue Gas from the Reformer of Hydrogen Production

Performance Improvement of a Combined Double‐way Thermochemical Sorption Refrigeration Cycle with Reheating Process

Optimisation of A Novel Resorption Cogeneration Using Mass and Heat Recovery

Analytical and numerical investigations on the high temperature upgrading solution of subcritical boilers

Innovative Multigeneration System with Heat Exchangers for Harnessing Thermal Energy from Cement Kiln Exhaust Gases

A hybrid cooling system to enable adhesion-free heat recovery from centrifugal granulated slag particles

Simultaneous Optimization and Integration of Multiple Process Heat Cascade and Site Utility Selection for the Design of a New Generation of Sugarcane Biorefinery

Scaling in a Geothermal Heat Exchanger at Soultz-Sous-Forêts (Upper Rhine Graben, France): A XRD and SEM-EDS Characterization of Sulfide Precipitates

Multi-Scenario scheduling optimisation for a novel Double-Stage ammonia absorption refrigeration system incorporating an organic Rankine cycle

Energy Intensity Reduction of Ca-Looping Co2 Capture by Applying Mixing Loop Seals and Cyclonic Systems

Condensational growth activated by cooling method for multi-objective treatment of desulfurized flue gas: A full-scale study

Performance improvement of supercritical carbon dioxide power cycles through its integration with bottoming heat recovery cycles and advanced heat exchanger design: A review

Optimization-Inspired Pin-Fin Array for Supercritical Carbon Dioxide Recuperator