Study of TiO2/Fe3O4-SAC/PVDF membrane for dye wastewater treatment under "double carbon" target
Enran Fan,Ping Fang,Lu Wen,Nan Wang,Min Zhao,Yan Li
DOI: https://doi.org/10.5004/dwt.2023.29738
IF: 1.1
2023-01-01
Desalination and Water Treatment
Abstract:In the context of “carbon peaking” and “carbon neutralization”, Fe3O4-SAC magnetic carbon, a modified material prepared from fouling peat, was used to enhance the effectiveness of polyvinylidene fluoride (PVDF) membranes in treating dye wastewater. Three dyestuffs, methyl violet, malachite green and Congo red, were tested in terms of water flux, retention rate and pollution resistance to investigate the effect of the modified membranes on the treatment of dyestuffs. The optimal performance of the modified membranes was investigated by varying the ion concentration, initial concentration, and pH value. A group of modified membranes (TiO2/Fe3O4-SAC/PVP/PVDF) was made by adding 1.5 wt.% of TiO2 to the casting solution and then adding different ratios of SAC-Fe3O4 to test the effect. The results showed that when the TiO2 content was 1.5 wt.% and Fe3O4/SAC content was 0.2 wt.%, the membranes had the best overall performance and could retain 71.24% of methyl violet, 75.62% of malachite green and 65.72% of Congo red, with fluxes of 827.35, 769.45 and 729.53 L/(m2·h), respectively), and the average Fe3O4/SAC preparation using 1 kg of municipal sludge can reduce 1.94 kg of CO2 emission, while using the modified membrane can reduce approximately 0.80~1.49 kg of CO2 emission per 1 ton of dye wastewater treated.
engineering, chemical,water resources