Abstract:The current research of the global chassis control problem for the full drive-by-wire vehicle focuses on the control allocation (CA) of the four-wheel-distributed traction/braking/steering systems. However, the path following performance and the handling stability of the vehicle can be enhanced a step further by automatically adjusting the vehicle speed to the optimal value. The optimal solution for the combined longitudinal and lateral motion control (MC) problem is given. First, a new variable step-size spatial transformation method is proposed and utilized in the prediction model to derive the dynamics of the vehicle with respect to the road, such that the tracking errors can be explicitly obtained over the prediction horizon at varying speeds. Second, a nonlinear model predictive control (NMPC) algorithm is introduced to handle the nonlinear coupling between any two directions of the vehicular planar motion and computes the sequence of the optimal motion states for following the desired path. Third, a hierarchical control structure is proposed to separate the motion controller into a NMPC based path planner and a terminal sliding mode control (TSMC) based path follower. As revealed through off-line simulations, the hierarchical methodology brings nearly 1700% improvement in computational efficiency without loss of control performance. Finally, the control algorithm is verified through a hardware in-the-loop simulation system. Double-lane-change (DLC) test results show that by using the optimal predictive controller, the root-mean-square (RMS) values of the lateral deviations and the orientation errors can be reduced by 41% and 30%, respectively, comparing to those by the optimal preview acceleration (OPA) driver model with the non-preview speed-tracking method. Additionally, the average vehicle speed is increased by 0.26 km/h with the peak sideslip angle suppressed to 1.9°. This research proposes a novel motion controller, which provides the full drive-by-wire vehicle with better lane-keeping and collision-avoidance capabilities during autonomous driving.

Biomimetic Adaptive Pure Pursuit Control for Robot Path Tracking Inspired by Natural Motion Constraints

Learning Accurate and Robust Velocity Tracking for Quadrupedal Robots

An Autonomous Robot for Collision-Free Person Following Through Model Predictive Control

Efficient Motion Planning Based on Kinodynamic Model for Quadruped Robots Following Persons in Confined Spaces

Nonlinear Model Predictive Path Tracking Control for Autonomous Vehicles Based on Orthogonal Collocation Method

An adaptive path tracking controller for autonomous vehicles based on the Pure Pursuit algorithm

Steering Motion Control of a Snake Robot Via a Biomimetic Approach

Adaptive Learning-Based Path-Tracking Control for Unknown Vehicle Systems under Performance Optimization

Robust path following control of 4WID autonomous vehicle with driving condition adaptive mechanism

Fuzzy Adaptive Control-based Real-time Obstacle Avoidance under Uncertain Perturbations

An improved path following algorithm of the autonomous bicycle

An Approach for Robotic Leaning Inspired by Biomimetic Adaptive Control

Novel Passive Path Following Controller For A Rehabilitation Robot

Regulated Pure Pursuit for Robot Path Tracking

Optimal Predictive Control for Path Following of a Full Drive-by-Wire Vehicle at Varying Speeds

Constrained Predictive Tracking Control for Unmanned Hexapod Robot with Tripod Gait

Overtaking Moving Obstacles with Digit: Path Following for Bipedal Robots via Model Predictive Contouring Control

FastMimic: Model-Based Motion Imitation for Agile, Diverse and Generalizable Quadrupedal Locomotion

Path-following control method for articulated vehicles based on dual heuristic programming

Fuzzy Adaptive Whale Optimization Control Algorithm for Trajectory Tracking of a Cable-Driven Parallel Robot

D-Tracking: Digital Twin Enabled Trajectory Tracking System of Autonomous Vehicles