Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Dynamic response and failure mechanism of ocean coral reef limestone under high strain rate loading

Static and dynamic compressive performance of coral reef limestone: interpretations of rate effect from laboratory tests

Dynamic mechanical behavior of coral rock subjected to high strain rate loading

Mesoscopic damage evolution of coral reef limestone based on real-time CT scanning

Experimental Investigation of Damage Evolution Characteristics of Coral Reef Limestone Based on Acoustic Emission and Digital Volume Correlation Techniques

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Meso-mechanical anisotropy and fracture evolution of reef limestones from the Maldives Islands and the South China Sea

Fracture failure characteristics of shallow coral reef under wave dynamic loading

Experimental Study on Damage Behavior of Porous Coral Limestone from the Zhongsha Islands, South China Sea

A unique time-dependent deformation behavior of coral reef limestone

Mechanical Properties and Binary-Medium-Based Constitutive Model for Coral-Reef Limestone Samples Subjected to Uniaxial Loading

Effect of chemical consolidation on physico-mechanical properties of porous coral reef limestone

Experimental study and numerical simulation of impact compression mechanical properties of high strength coral aggregate seawater concrete

Experimental Investigation on the Effect of Strain Rate on Brittle Limestone in Post-earthquake Landslide Area

Study on Dynamic Mechanical Properties of Limestone under Uniaxial Impact Compressive Loads

Liquefaction characteristics of saturated marine coral sand with different non-plastic fines content subjected to complex cyclic stress paths

A machine learning-based strategy for predicting the mechanical strength of coral reef limestone using X-ray computed tomography

Dynamic mechanical responses and failure characteristics of fractured rocks with hydrostatic confining pressures: An experimental study

Triaxial Creep Mechanical Behaviors and Creep Damage Model of Dolomitic Limestone Material under Multi-Stage Incremental Loading

Mechanical and energetic properties of rock-like specimens under water-stress coupling environment

Mechanical properties and constitutive model of coral aggregate concrete subjected to dynamic uniaxial and triaxial compression