Abstract:Machining characteristics were applied to topology optimization for machine tool structure design improvement in this study, and the goals of lightweight and high rigidity of the structure were achieved. Firstly, an ultrasonic-assisted grinding experiment was carried out on zirconia to investigate the surface roughness, surface morphology, grinding vibration, and forces. Then, the topology optimization analysis was conducted for structure design improvement, in which the magnitude of the grinding vibration was utilized as the reference for selecting the topology subsystems and the grinding force was used as the boundary conditions of the static analysis in the topology optimization. Hence, columns, bases, and saddles were redesigned for structure stiffness improvement, and the variations in the effective stress, natural frequency, weight, and stiffness of the whole machine tool were compared accordingly. The results showed that the deduced topological shape (model) can make the natural frequency and stiffness of the whole machine tool tend to be stable and convergent with a weight retention rate more than 75% as the design constraint. The subsystem structures with larger effective stress distributions were designated for stiffness improvement in the design. At the same time, the topological shape (model) was also employed in the design for weight reduction, focusing on minimizing redundant materials within the structure. In contrast to the consistency of the modal shapes before and after topological analysis, the sequential number of the modal mode of the machine tool model after topological analysis was advanced by two modes relative to those of the original situation, which means the original machine tool may be out of its inherently resonant frequency range. Also, the natural frequencies corresponding to each mode had an increasing tendency, and the maximum increase was 110.28%. Furthermore, the stiffness of the machine tool also increased significantly, with a maximum of 355.97%, leading to minor changes of the machine tool’s weight. These results confirm that the topology optimization based on machining characteristics proposed in this study for structure redesign improvement and stiffness enhancement is effective and feasible.

Achieving desired nodal lines in freely vibrating structures via material-field series-expansion topology optimization

Dynamic topology optimization for structures exhibiting frequency-dependent material properties with prescribed frequency forbidden band

Discrete variable topology optimization for maximizing single/multiple natural frequencies and frequency gaps considering the topological constraint

A multi-material topology optimization method based on the material-field series-expansion model

Topology optimization for cyclic periodic structures with frequency objectives of nodal diameter modes

Topology optimization of vibrating structures with frequency band constraints

Structural Topology Optimization with Respect to Eigenfrequencies of Vibration

A multi-regional MFSE topology optimization method for large-scale structures with arbitrary design domains

Structure Design Improvement and Stiffness Reinforcement of a Machine Tool through Topology Optimization Based on Machining Characteristics

Topological design of continuum structures subjected to forced vibration

An Eigenfrequency-Constrained Topology Optimization Method with Design Variable Reduction

Vibration suppression using integrated topology optimization of host structures and damping layers

A Novel Derivative Free Methodology for Multi-Material Topology Optimization Based on Projective Transformations and Boolean Operations

2D Minimum Compliance Topology Optimization Based on a Region Partitioning Strategy

Multi-scale design of composite material structures for maximizing fundamental natural frequency

Topology optimization of structural frames considering material nonlinearity and time-varying excitation

Robust topology optimization of multi-material structures based on the material-field series-expansion method

Maximization of Values of Simple and Multiple Eigenfrequencies of Continuum Structures Using Topology Optimization

Concurrent Multi-Scale and Multi-Material Topological Optimization of Vibro-Acoustic Structures

A guide-weight criterion-based topology optimization method for maximizing the fundamental eigenfrequency of the continuum structure

An efficient transient dynamic topology optimization framework based on successive iteration of analysis and design