Abstract:To meet the ever-growing demands over electrochemical energy storage, tungsten trioxide (WO3) has aroused substantial attention as a promising anodic material for lithium-ion batteries due to its high theoretical capacity, abundant earth storage, and eco-friendliness. However, developing high-performance WO3-based electrodes is hampered by its restrictive conductivity and tremendous structural as well as the volumetric changes during the charge/discharge processes. Herein, a novel bio-inspired nanofibrous WO3/carbon composite was synthesized via a facile hydrothermal method employing pre-carbonized cellulose substrate (e.g., ordinary filter paper) as both the structural scaffold and the carbon source. The urchin-like WO3 microspheres with diameters of 3-6 mu m assembled by nanorods were uniformly anchored on the surfaces of the cellulose-derived carbon fibers. The three-dimensional network structure of the composite was beneficial in alleviating the volume expansion of WO3 nanorods and enhanced the charge-transport kinetics of the electroactive materials. The composite with an optimized content of WO3 (26.36 wt%) exhibited superior lithium storage properties with an initial discharge capacity of 1470 mAh g-1 and an extraordinary long-term cycling performance of 682 mAh g-1 capacity retention after 300 cycles at 100 mA g-1. Furthermore, cyclic voltammetry, ex-situ XRD, and SEM measurements for mechanism studies were carried out to yield deeper insights into the synergism in the WO3/carbon electrodes, revealing the predominance of reversible pseudocapacitive intercalation of lithium-ions during the electrochemical reaction inside the WO3/carbon anode.

Free-Standing Carbon Nanofiber Composite Networks Derived from Bacterial Cellulose and Polypyrrole for Ultrastable Potassium-Ion Batteries

Mn0.5Co2.5O4 Nanofibers Intercalated into Graphene Frameworks with Mesoporous Structure for Batteries and Supercapacitors

Bacterial-Derived, Compressible and Hierarchical Porous Carbon for High Performance Potassium-ion Batteries.

Electrode Materials: A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries (Adv. Energy Mater. 6/2016)

Nickel-Sulfide/Vanadium-Sulfide/Carbon Composite Nanofibers for Lithium-Ion Storage

A nanofibrous polypyrrole/silicon composite derived from cellulose substance as the anode material for lithium-ion batteries.

Nanofibrous silicon/carbon composite sheet derived from cellulose substance as free-standing lithium-ion battery anodes

Conductive Cellulose Nanofiber Enabled Thick Electrode for Compact and Flexible Energy Storage Devices

Freestanding and Consecutive Intermixed N-Doped Hard Carbon@Soft Carbon Fiber Architectures as Ultrastable Anodes for High-Performance Li-Ion Batteries

Ultra-Stable Potassium Ion Storage of Nitrogen-Doped Carbon Nanofiber Derived from Bacterial Cellulose

Electric Papers of Graphene-Coated Co3O4 Fibers for High-Performance Lithium-Ion Batteries

Biomass derived fibrous porous carbon loaded zinc oxide nanoparticles as high-performance anode materials for lithium ion batteries

Preparation and Characterization of Flexible Lithium Iron Phosphate/graphene/cellulose Electrode for Lithium Ion Batteries

Fabrication of Carbon Nanofiber-Driven Electrodes from Electrospun Polyacrylonitrile/Polypyrrole Bicomponents for High-Performance Rechargeable Lithium-Ion Batteries

Cellulose-derived tin-oxide-nanoparticle-embedded carbon fibers as binder-free flexible Li-ion battery anodes

Lignin-Based/Polypyrrole Carbon Nanofiber Electrode With Enhanced Electrochemical Properties by Electrospun Method

Bacterial Cellulose Based Nano-biomaterials for Energy Storage Applications

Preparation of bamboo carbon fiber and sandwich-like bamboo carbon fiber@SnO2@carbon composites and their potential application in structural lithium-ion battery anodes

A Three-Dimensional Fibrous Tungsten-Oxide/carbon Composite Derived from Natural Cellulose Substance As an Anodic Material for Lithium-Ion Batteries

A Hydrogel-Enabled Free-Standing Polypyrrole Cathode Film for Potassium Ion Batteries with High Mass Loading and Low-Temperature Stability

Multifunctional Cr2O3 Quantum Nanodots to Improve the Lithium-Ion Storage Performance of Free-Standing Carbon Nanofiber Networks