Abstract:Electrochromic devices (ECDs) exhibiting tunable optical and thermal modulation in the infrared (IR) region have attracted extensive attention in recent years due to their attractive application prospects in both military and civilian settings. However, considering the continuous energy supply needed for driving the device operation, it is desired to develop advanced IR-ECDs with low energy consumption. Herein, a flexible self-driven IR-ECD is constructed for achieving variable optical and thermal management in a low-energy mode. In this device, a built-in potential difference of 1.36 V exists between the EC polyaniline cathode and the aluminum foil anode. Consequently, there is a rapid and obvious increase in the IR reflectance of the device after connecting the two electrodes. Such a self-driven reflectance contrast is over 20% at the wavelength of 1500 nm, and the coloration efficiency of the device reaches up to 93.6 cm2 C–1. Meanwhile, the maximum apparent temperature modulation on the surface of the device reaches up to 5.6 °C. Then, the self-driven IR-ECD could recover to its original state driven by a solar cell, indicating good reversibility and stability. We anticipate that this work may provide a new insight into developing advanced self-driven IR-ECDs for applications in dynamic military camouflage and commercial thermal control.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14123.FTIR spectra of the PANI electrode; CV behaviors of the PANI electrode with different scan rates; cross-sectional SEM images of the PANI electrode with different polymerization charges; CV behaviors of the PANI electrode with different polymerization charges in 2.5–25 μm; IR reflectance of the PANI electrodes with different polymerization charges; the ΔR between colored and bleached states of the PANI electrodes; the reflectance spectra of Au electrodes and PANI electrodes measured at different Au thicknesses; thermal control of the PANI films with different polymerization charges; open-circuit voltage of the self-driven IR-ECD; electrochemical performance of the self-driven IR-ECD; the changes in the structure of the device before and after 100 cycles; optical memory performance of the self-driven IR-ECD; the schematic setup for the measurement of thermal regulation performance of the IR-ECDs; digital photo of the solar panel with a stable voltage output; the comparison of the performance of other NIR-EC films and devices; EC performance of Al-based devices in previous reports; and the ΔR values of the self-driven IR-ECD after different bending cycles (PDF)This article has not yet been cited by other publications.

A self-patterning multicolor electrochromic device driven by horizontal redistribution of ions

Multicolor electrochromic fabric with a simple structure of PEDOT:PSS/DMSO

Ultrathin flexible electrochromic devices enabled by highly transparent ion conducting films

Robust and swiftly multicolor Zn2+-electrochromic devices based on polyaniline cathode

Self-Powered Flexible Multicolor Electrochromic Devices for Information Displays

Employing polyaniline/viologen complementarity to enhance coloration and charge dissipation in multicolor electrochromic display with wide modulation range

Complementary multicolor electrochromic devices with excellent stability based on porous tin oxide nanosheet scaffold

A novel organic electrochromic device with hybrid capacitor architecture towards multicolour representation

Multiple Color Reflection in a Single Unit Cell Using Double-Layer Electrochromic Reaction

Bioinspired Dynamically Switchable PANI/PS‐b‐P2VP Thin Films for Multicolored Electrochromic Displays with Long‐Term Durability

Self-Driven Infrared Electrochromic Device with Tunable Optical and Thermal Management

A Dual-Type Electrochromic Device Based on Complementary Silica/Conducting Polymers Nanocomposite Films for Excellent Cycling Stability

Interfacial Charge Transfer and Zinc Ion Intercalation and Deintercalation Dynamics in Flexible Multicolor Electrochromic Energy Storage Devices

Colorless-to-Black Electrochromism from Binary Electrochromes toward Multifunctional Displays

An all-solid-state polymeric electrochromic device based on two well-matched electrodes with fast switching time and excellent cycling stability

Performance Optimization for Multicolor Electrochromic Devices: Morphology and Composition Regulation of Inorganic Electrochromic Materials and Selectivity of Ions

Inkjet printing of 2D polyaniline for fabricating flexible and patterned electrochromic devices

Multicolored Displays with Selective Visible‐Infrared Spectral Modulation for Optical Information Transmission

Transparent Multicolor Electrochromic Displays with Ingenious Hues Adjustment by Integrating Cholesteric Liquid Crystal with Viologen Gel

In Situ Dynamic Study of Color-Changing in Liquid Colloidal Crystals for Electrophoretic Displays

Carbon dots as multifunctional electrolyte additives toward multicolor and low self-discharge electrochromic energy storage devices