Modeling Fission in the Cascade-Exciton Model

Arnold J. Sierk,Stepan G. Mashnik

DOI: https://doi.org/10.48550/arXiv.nucl-th/9812070

1998-12-25

Abstract:Recent developments of the Cascade-Exciton Model (CEM) of nuclear reactions to describe high energy particle induced fission are briefly described. The increased accuracy and predictive power of the CEM are shown by several examples. Further necessary work is outlined.

Nuclear Theory

What problem does this paper attempt to address?

Improved Cascade-Exciton Model of Nuclear Reactions

Stepan G. Mashnik,Arnold J. Sierk

DOI: https://doi.org/10.48550/arXiv.nucl-th/9812069

1998-12-24

Nuclear Theory

Abstract:Recent improvements to the Cascade-Exciton Model (CEM) of nuclear reactions are briefly described. They concern mainly the cascade stage of reactions and a better description of nuclei during the preequilibrium and evaporation stages of reactions. The development of the CEM concerning fission is given in a separate talk at this conference. The increased accuracy and predictive power of the CEM are shown by several examples. Possible further improvements to the CEM and other models are discussed.
Total Reaction Cross Sections in CEM and MCNP6 at Intermediate Energies

Leslie M. Kerby,Stepan G. Mashnik

DOI: https://doi.org/10.1016/j.nimb.2015.04.057

2015-05-05

Abstract:Accurate total reaction cross section models are important to achieving reliable predictions from spallation and transport codes. The latest version of the Cascade Exciton Model (CEM) as incorporated in the code CEM03.03, and the Monte Carlo N-Particle transport code (MCNP6), both developed at Los Alamos National Laboratory (LANL), each use such cross sections. Having accurate total reaction cross section models in the intermediate energy region ($\sim$50 MeV to $\sim$5 GeV) is very important for different applications, including analysis of space environments, use in medical physics, and accelerator design, to name just a few. The current inverse cross sections used in the preequilibrium and evaporation stages of CEM are based on the Dostrovsky {\it et al.} model, published in 1959. Better cross section models are available now. Implementing better cross section models in CEM and MCNP6 should yield improved predictions for particle spectra and total production cross sections, among other results. Our current results indicate this is, in fact, the case.

Nuclear Theory
Schematic model for induced fission in a configuration-interaction approach

K. Uzawa,K. Hagino

2023-08-11

Abstract:We model fission at barrier-top energies in a simplified model space that permits comparison of different components of the residual nucleon-nucleon interaction. The model space is built on particle-hole excitations of reference configurations. These are Slater determinants of uniformly spaced orbitals characterized only by their quantum numbers and orbital energies. The residual interaction in the Hamiltonian includes the diabatic interaction connecting similar orbitals at different deformations, the pairing interaction between like nucleons, and a schematic off-diagonal neutron-proton interaction. We find that the fission reaction probability is sensitive to the off-diagonal neutron-proton interaction much more than to the pairing and the diabatic interactions. In particular, the transmission coefficients become insensitive to th e strength of the pairing interaction when the neutron-proton interaction is large. We also find that the branching ratio is insensitive to the final-state scission dynamics, as is assumed in the well-known Bohr-Wheeler theory.

Nuclear Theory
Modeling barrier-top fission dynamics in a discrete-basis formalism

G. F. Bertsch,K. Hagino

DOI: https://doi.org/10.48550/arXiv.2302.00572

2023-02-02

Abstract:A configuration-interaction model is presented for the barrier region of induced fission. The configuration space is composed of seniority-zero configurations constructed from self-consistent mean-field wave functions. The Hamiltonian matrix elements between configurations include diabatic and pairing interactions between particles. Other aspects of the Hamiltonian are treated statistically, guided by phenomenological input of compound-nucleus transmission coefficients. In this exploratory study the configuration space is restricted to neutron excitations only. A key observable calculated in the model is the fission-to-capture branching ratio. We find that both pairing and diabatic interactions are important for achieving large branching to the fission channels. In accordance with the transition-state theory of fission, the calculated branching ratio is found to be quite insensitive to the fission decay widths of the pre-scission configurations. However, the barrier-top dynamics appear to be quite different from transition-state theory in that the transport is distributed over many excited configurations at the barrier top.

Nuclear Theory
Fission in a Microscopic Framework: from Basic Science to Support for Applications

I. Stetcu,A. Bulgac,S. Jin,K. J. Roche,N. Schunck

DOI: https://doi.org/10.1051/epjconf/202125600016

2021-01-01

EPJ Web of Conferences

Abstract:Recent developments, both in theoretical modeling and computational power, have allowed us to make progress on a goal not fully achieved yet in nuclear theory: a microscopic theory of nuclear fission. Even if the complete microscopic description remains a computationally demanding task, the information that can be provided by current calculations can be extremely useful to guide and constrain more phenomenological approaches, which are simpler to implement. First, a microscopic model that describes the real-time dynamics of the fissioning system can justify or rule out some of the approximations. Second, the microscopic approach can be used to obtain trends, e.g., with increasing excitation energy of the fissioning system, or even to compute observables that cannot be otherwise calculated in phenomenological approaches or that can be hindered by the limitations of the method. We briefly present in this contribution the time-dependent superfluid local density approximation (TDSLDA) approach to nuclear fission, approach that has become a very successful theoretical model in many areas of many-body research. The TDSLDA incorporates the effects of the continuum, the dynamics of the pairing field, and the numerical solution is implemented with controlled approximations and negligible numerical errors. The main part of the current contribution will be dedicated to discussing the method, and recent results concerning the fission dynamics. In addition, we present results on the excitation energy sharing between the fragments, which are in agreement with a qualitative conclusions extracted from a limited number of experimental measurements of properties of prompt neutrons.
Multimodal fission from self-consistent calculations

Daniel Lay,Eric Flynn,Sylvester Agbemava,Kyle Godbey,Witold Nazarewicz,Samuel A. Giuliani,and Jhilam Sadhukhan

DOI: https://doi.org/10.1103/physrevc.109.044306

IF: 3.199

2024-04-03

Physical Review C

Abstract:Background: When multiple fission modes coexist in a given nucleus, distinct fragment yield distributions appear. Multimodal fission has been observed in a number of fissioning nuclei spanning the nuclear chart, and this phenomenon is expected to affect the nuclear abundances synthesized during the rapid neutron-capture process ( r -process). Purpose: In this study, we generalize the previously proposed hybrid model for fission-fragment yield distributions to predict competing fission modes and estimate the resulting yield distributions. Our framework allows for a comprehensive large-scale calculation of fission-fragment yields suited for r -process nuclear network studies. Methods: Nuclear density functional theory is employed to obtain the potential energy and collective inertia tensor on a multidimensional collective space defined by mass multipole moments. Fission pathways and their relative probabilities are determined using the nudged elastic band method. Based on this information, mass and charge fission yields are predicted using the recently developed hybrid model. Results: Fission properties of fermium isotopes are calculated in the axial quadrupole-octupole collective space for three energy density functionals (EDFs). Disagreement between the EDFs appears when multiple fission modes are present. Within our framework, the UNEDF1HFB EDF agrees best with experimental data. Calculations in the axial quadrupole-octupole-hexadecapole collective space improve the agreement with the experiment for SkM* . We also discuss the sensitivity of fission predictions on the choice of EDF for several superheavy nuclei. Conclusions: Fission-fragment yield predictions for nuclei with multiple fission modes are sensitive to the underlying EDF. For large-scale calculations in which a minimal number of collective coordinates is considered, UNEDF1HFB provides the best description of experimental data, though the sensitivity motivates robust quantification of the uncertainties of the theoretical model. 2 More Received 20 November 2023 Accepted 23 February 2024 ©2024 American Physical Society Physics Subject Headings (PhySH) Research Areas FissionNuclear density functional theory Properties A ≥ 220 Techniques Nuclear many-body theory Nuclear Physics

physics, nuclear
Extension of the Hauser-Feshbach Fission Fragment Decay Model to Multi-Chance Fission

A.E. Lovell,T. Kawano,S. Okumura,I. Stetcu,M.R. Mumpower,P. Talou

DOI: https://doi.org/10.1103/PhysRevC.103.014615

2020-10-27

Abstract:The Hauser-Feshbach fission fragment decay model, $\mathtt{HF^3D}$, which calculates the statistical decay of fission fragments, has been expanded to include multi-chance fission, up to neutron incident energies of 20 MeV. The deterministic decay takes as input pre-scission quantities - fission probabilities and the average energy causing fission - and post-scission quantities - yields in mass, charge, total kinetic energy, spin, and parity. From these fission fragment initial conditions, the full decay is followed through both prompt and delayed particle emissions, allowing for the calculation of prompt neutron and $\gamma$ properties, such as multiplicity and energy distributions, both independent and cumulative fission yields, and delayed neutron observables. In this work, we describe the implementation of multi-chance fission into the $\mathtt{HF^3D}$ model, and show an example of prompt and delayed quantities beyond first-chance fission, using the example of neutron-induced fission on $^{235}$U. This expansion represents significant progress in consistently modeling the emission of prompt and delayed particles from fissile systems.

Nuclear Theory,Nuclear Experiment
Alleviating the inconsistencies in modelling decay of fissile compound nuclei

Tathagata Banerjee,S. Nath,Santanu Pal

DOI: https://doi.org/10.1103/PhysRevC.99.024610

2018-09-26

Abstract:This work attempts to overcome the existing inconsistencies in modelling decay of fissile nucleus by inclusion of important physical effects in the model and through a systematic analysis of a large set of data over a wide range of CN mass (ACN). The model includes shell effect in the level density (LD) parameter, shell correction in the fission barrier, effect of the orientation degree of freedom of the CN spin (Kor), collective enhancement of level density (CELD) and dissipation in fission. Input parameters are not tuned to reproduce observables from specific reaction(s) and the reduced dissipation coefficient is treated as the only adjustable parameter. Calculated evaporation residue (ER) cross sections, fission cross sections and particle, i.e. neutron, proton and alpha-particle, multiplicities are compared with data covering ACN = 156-248. The model produces reasonable fits to ER and fission excitation functions for all the reactions considered in this work. Pre-scission neutron multiplicities are underestimated by the calculation beyond ACN~200. An increasingly higher value of pre-saddle dissipation strength is required to reproduce the data with increasing ACN. Proton and alpha-particle multiplicities, measured in coincidence with both ERs and fission fragments, are in qualitative agreement with model predictions. The present work mitigates the existing inconsistencies in modelling statistical decay of the fissile CN to a large extent.

Nuclear Theory
Nuclear Fission: from more phenomenology and adjusted parameters to more fundamental theory and increased predictive power

Aurel Bulgac,Shi Jin,Piotr Magierski,Kenneth Roche,Nicolas Schunck,Ionel Stetcu

DOI: https://doi.org/10.1051/epjconf/201716300007

2017-01-01

EPJ Web of Conferences

Abstract:Two major recent developments in theory and computational resources created the favorable conditions for achieving a microscopic description of fission dynamics in classically allowed regions of the collective potential energy surface, almost eighty years after its discovery in 1939 by Hahn and Strassmann [1]. The first major development was in theory, the extension of the Time-Dependent Density Functional Theory (TDDFT) [2–5] to superfluid fermion systems [6]. The second development was in computing, the emergence of powerful enough supercomputers capable of solving the complex systems of equations describing the time evolution in three dimensions without any restrictions of hundreds of strongly interacting nucleons. Thus the conditions have been created to renounce phenomenological models and incomplete microscopic treatments with uncontrollable approximations and/or assumptions in the description of the complex dynamics of fission. Even though the available nuclear energy density functionals (NEDFs) are phenomenological still, their accuracy is improving steadily and the prospects of being able to perform calculations of the nuclear fission dynamics and to predict many properties of the fission fragments, otherwise not possible to extract from experiments.
Quantum Molecular Charge-Transfer Model for Multistep Auger-Meitner Decay Cascade Dynamics

Adam E. A. Fouda,Stephen H. Southworth,Phay J. Ho

DOI: https://doi.org/10.1021/acs.jctc.4c00778

2024-10-13

Journal of Chemical Theory and Computation

Abstract:The fragmentation of molecular cations following inner-shell decay processes in molecules containing heavy elements underpins the X-ray damage effects observed in X-ray scattering measurements of biological and chemical materials, as well as in medical applications involving Auger electron-emitting radionuclides. Traditionally, these processes are modeled using simulations that describe the electronic structure at an atomic level, thereby omitting molecular bonding effects. This work addresses...

chemistry, physical,physics, atomic, molecular & chemical
Fission Fragment Mass and Kinetic Energy Yields of Fermium Isotopes

K. Pomorski,A. Dobrowolski,B. Nerlo-Pomorska,M. Warda,A. Zdeb,J. Bartel,H. Molique,C. Schmitt,Z. G. Xiao,Y. J. Chen,L. L. Liu

2023-09-18

Abstract:A rapidly converging 4-dimensional Fourier shape parametrization is used to model the fission process of heavy nuclei. Potential energy landscapes are computed within the macroscopic-microscopic approach, on top of which the multi-dimensional Langevin equation is solved to describe the fission dynamics. Charge equilibration at scission and de-excitation by neutron evaporation of the primary fragments after scission is investigated. The model describes various observables, including fission-fragment mass, charge, and kinetic energy yields, as well as post-scission neutron multiplicities and, most importantly, their correlations, which are crucial to unravel the complexity of the fission process. The parameters of the dynamical model were tuned to reproduce experimental data obtained from thermal neutron-induced fission of $^{235}$U, which allows us to discuss the transition from asymmetric to symmetric fission along the Fm isotopic chain.

Nuclear Theory,Nuclear Experiment
Master-equation for Cascade Damage Modeling

AM Ovcharenko,CH Woo,AA Semenov

DOI: https://doi.org/10.1016/j.jnucmat.2005.02.001

IF: 3.555

2005-01-01

Journal of Nuclear Materials

Abstract:This paper is a continuation of our effort to understand and model irradiation effects under cascade damage. The conventional master equation for the evolution of a void ensemble is reformulated to include the stochastic effects due to the random cascade initiation. Numerical solution of the modified master equations to model the evolution of an ensemble of voids explicitly shows that stochastic fluctuations due to random cascade initiation produce important effects that cannot be accounted for by the conventional mean-field rate theory approach. The results are in good agreement with those derived previously using the Fokker–Planck equation.
Merits of atomic cascade computations

S. Fritzsche,A. K. Sahoo,L. Sharma,Z. W. Wu,S. Schippers

DOI: https://doi.org/10.1140/epjd/s10053-024-00865-z

2024-06-16

The European Physical Journal D

Abstract:Atomic cascades refer—first and foremost—to the stepwise de-excitation of excited atoms owing to the emission of electrons or photons. Apart from dedicated experiments at storage rings and synchrotrons, such cascades frequently occur in astro and plasma physics, material research, surface science and at various places elsewhere. In addition, moreover, "atomic cascades" have been found a useful concept for modeling atomic behavior under different conditions, for instance, when dealing with the photoabsorption of matter, the generation of synthesized spectra, or for determining a rather wide class of (plasma) rate coefficients. We here compile and discuss several atomic cascades (schemes) that help predict cross sections, rate coefficients, electron and photon spectra, or ion distributions. We also demonstrate how readily these schemes have been implemented within JAC, the Jena Atomic Calculator. Emphasis is placed on the classification of atomic cascades and their (quite) natural breakdown into cascade computations , to deal with the electronic structure and transition amplitudes of atoms and ions, as well as the cascade simulation of those properties and spectra, that are experimentally accessible. As an example, we show and discuss the computation of dielectronic recombination plasma rate coefficients for beryllium-like gold ions. The concept of atomic cascades and its implementation into JAC can be applied for most ions across the periodic table and will facilitate the modeling and interpretation of many forthcoming observations.

optics,physics, atomic, molecular & chemical
Non-equilibrium Green's function approach to low-energy fission dynamics: fluctuations in fission reactions

K. Uzawa,K. Hagino

2024-06-29

Abstract:We present a microscopic modeling for a decay of a heavy compound nucleus, starting from a nucleonic degree of freedom. To this end, we develop an approach based on a non-equilibrium Green's function, which is combined with a configuration interaction (CI) approach based on a constrained density-functional theory (DFT). We apply this approach to a barrier-top fission of $^{236}$U, restricting the model space to seniority zero configurations of neutrons and protons. We particularly focus on the distribution of the fission probability. We find that it approximately follows the chi-squared distribution with the number of degrees of freedom $\nu$ of the order of 1, which is consistent with the experimental finding. We also show that $\nu$ corresponds to the number of eigenstates of the many-body Hamiltonian whose energy is close to the excitation energy of the system and at the same time which have significant components on both sides of a fission barrier.

Nuclear Theory,Mesoscale and Nanoscale Physics,Statistical Mechanics,Nuclear Experiment,Chemical Physics
Covariant density functional theory for nuclear fission based on a two-center harmonic oscillator basis

Zeyu Li,Shengyuan Chen,Minghui Zhou,Yongjing Chen,Zhipan Li

DOI: https://doi.org/10.1103/physrevc.109.064310

IF: 3.199

2024-06-11

Physical Review C

Abstract:Background: Nowadays, modern microscopic approaches for fission are generally based on the framework of nuclear density functional theory (DFT), which has enabled a self-consistent treatment of both static and dynamic aspects of fission. The key issue is a DFT solver with high precision and efficiency especially for the large elongated configurations. Purpose: We aim to develop a DFT solver with high precision and efficiency based on the point coupling covariant density functional theory (CDFT), which has achieved great success in describing properties of nuclei for the whole nuclear chart. Method: We have extended the point-coupling CDFT to be based on the two-center harmonic oscillator (TCHO) basis, which matches well with the large elongated configurations during the fission process. A multidimensional constraint and the time-dependent generator coordinate method (TDGCM) have been used to analyze the fission potential energy surface (PES) and fission dynamics, respectively. To simulate the splitting process of the nascent fragments beyond scission, we also introduce a density constraint into the new CDFT framework. Results: Illustrative calculations have been done for the PESs and induced fission dynamics of two typical examples: Th226 and Pu240 . A more reasonable PES is obtained in the new framework compared to that based on the one-center harmonic oscillator (OCHO) with the same basis space. An optimization of about 0.2–0.3 MeV has been achieved for the outer fission barriers and large elongated configurations. The dynamical simulations based on CDFT-TCHO show an improved description of fission yields. Conclusions: The newly developed CDFT solver optimizes the elongated configurations, improves the calculation efficiency, and provides a basis for large-scale multidimensional constraint calculations and dynamical simulations. 5 More Received 7 September 2023 Accepted 17 May 2024 ©2024 American Physical Society Physics Subject Headings (PhySH) Research Areas FissionModels & methods for nuclear reactionsNuclear density functional theoryNuclear structure & decays Properties A ≥ 220 Techniques Nuclear many-body theory Nuclear Physics

physics, nuclear
Excitation-energy dependence of fission-fragment neutron multiplicity in the improved scission-point model

H. Paşca,A. V. Andreev,G. G. Adamian,N. V. Antonenko,and N. V. Antonenko

DOI: https://doi.org/10.1103/physrevc.109.044601

IF: 3.199

2024-04-02

Physical Review C

Abstract:For the neutron-induced fission of nuclei U235,238 , the evolution of the shape of fission-fragment neutron multiplicity distribution with increasing excitation energy is explored within the improved scission-point model. For a wide range of incident neutron energies, the dependence of an average number of neutrons emitted per a fission event on the excitation energy is studied. https://doi.org/10.1103/PhysRevC.109.044601 ©2024 American Physical Society

physics, nuclear
A new approach to barrier-top fission dynamics

G.F. Bertsch,J.M. Mehlhaff

DOI: https://doi.org/10.1051/epjconf/201612201001

2015-11-06

Abstract:We proposed a calculational framework for describing induced fission that avoids the Bohr-Wheeler assumption of well-defined fission channels. The building blocks of our approach are configurations that form a discrete, orthogonal basis and can be characterized by both energy and shape. The dynamics is to be determined by interaction matrix elements between the states rather than by a Hill-Wheeler construction of a collective coordinate. Within our approach, several simple limits can be seen: diffusion; quantized conductance; and ordinary decay through channels. The specific proposal for the discrete basis is to use the $K^\pi$ quantum numbers of the axially symmetric Hartree-Fock approximation to generate the configurations. Fission paths would be determined by hopping from configuration to configuration via the residual interaction. We show as an example the configurations needed to describe a fictitious fission decay $^{32}{\rm S} \rightarrow ^{16}{\rm O} + ^{16}{\rm O}$. We also examine the geometry of the path for fission of $^{236}$U, measuring distances by the number of jumps needed to go to a new $K^\pi$ partition.

Nuclear Theory
Towards a unified description of isotopic fragment properties in spontaneous and fusion-induced fission within a 4D dynamical Langevin model

K. Pomorski,B. Nerlo-Pomorska,J. Bartel,C. Schmitt,Z. G. Xiao,Y. J. Chen,L. L. Liu

2024-06-12

Abstract:Spontaneous fission of 252Cf and fusion-induced fission of 250Cf are investigated within a multi-dimensional Langevin model. The potential-energy surface is calculated in the macroscopic-microscopic LSD+Yukawa-folded approach using the four-dimensional Fourier-over-Spheroid shape parametrization. The dynamical evolution described by the Langevin equation is coupled to neutron evaporation, thereby allowing for the possibility of multi-chance fission. Charge equilibration and excitation-energy sharing between the fragments emerging at scission are evaluated, and their de-excitation is finally computed. The correlation between various observables, particularly the isotopic properties of the fragments, is discussed and compared with the experiment whenever available. The theoretical predictions are generally in good agreement with the data.

Nuclear Theory
Nuclear Fission Dynamics: Past, Present, Needs, and Future

Aurel Bulgac,Shi Jin,Ionel Stetcu

DOI: https://doi.org/10.3389/fphy.2020.00063

IF: 3.718

2020-01-01

Frontiers in Physics

Abstract:Significant progress in the understanding of the fission process within a microscopic framework has been recently reported. Even though the complete description of this important nuclear reaction remains a computationally demanding task, recent developments in theoretical modeling and computational power have brought current microscopic simulations to the point where they can provide guidance and constraints to phenomenological models, without making recourse to parameters. An accurate treatment compatible with our understanding of the inter-nucleon interactions should be able to describe the real-time dynamics of the fissioning system and could justify or rule out assumptions and approximations incompatible with the underlying universally accepted quantum-mechanical framework. Of particular importance are applications to observables that cannot be directly measured in experimental setups (such as the angular momentum distribution of the fission fragments, or the excitation energy sharing between the fission fragments, or fission of nuclei formed during the r-process), and their dependence of the excitation energy in the fissioning system. Even if accurate predictions are not within reach, being able to extract the trends with increasing excitation energy is important in various applications. The most advanced microscopic simulations of the fission process do not support the widely used assumption of adiabaticity of the large amplitude collective motion in fission, in particular for trajectories from the outer saddle toward the scission configuration. Hence, the collective potential energy surface and inertia tensor, which are the essential elements of many simplified microscopic theoretical approaches, become irrelevant. In reality, the dynamics of the fissioning system is slower than in the case of pure adiabatic motion by a factor of three to four times and is strongly overdamped. The fission fragment properties are defined only after the full separation, while in most of the current approaches no full separation can be achieved, which increases the uncertainties in describing fission-related observables in such methods.

Modeling Fission in the Cascade-Exciton Model

Improved Cascade-Exciton Model of Nuclear Reactions

Total Reaction Cross Sections in CEM and MCNP6 at Intermediate Energies

Schematic model for induced fission in a configuration-interaction approach

Modeling barrier-top fission dynamics in a discrete-basis formalism

Fission in a Microscopic Framework: from Basic Science to Support for Applications

Multimodal fission from self-consistent calculations

Extension of the Hauser-Feshbach Fission Fragment Decay Model to Multi-Chance Fission

Alleviating the inconsistencies in modelling decay of fissile compound nuclei

Nuclear Fission: from more phenomenology and adjusted parameters to more fundamental theory and increased predictive power

Quantum Molecular Charge-Transfer Model for Multistep Auger-Meitner Decay Cascade Dynamics

Fission Fragment Mass and Kinetic Energy Yields of Fermium Isotopes

Master-equation for Cascade Damage Modeling

Merits of atomic cascade computations

Non-equilibrium Green's function approach to low-energy fission dynamics: fluctuations in fission reactions

Covariant density functional theory for nuclear fission based on a two-center harmonic oscillator basis

Excitation-energy dependence of fission-fragment neutron multiplicity in the improved scission-point model

A new approach to barrier-top fission dynamics

Towards a unified description of isotopic fragment properties in spontaneous and fusion-induced fission within a 4D dynamical Langevin model

Nuclear Fission Dynamics: Past, Present, Needs, and Future