Abstract:The behavior of a passive plate placed behind a D-cylinder is numerically studied by using the modified immersed boundary methods. The linear Euler–Bernoulli Beam theory is employed as the structure model for the flexible plate. The effects of the Reynolds number, the mass ratio and rigidity of the material and the distance between the D-cylinder and the plate are investigated. Results show that, the initial perturbation is inhibited when the Reynolds number is small. By increasing the Reynolds number, the larger the Reynolds number the larger amplitude of the plate’s oscillation. When the plate is placed close to the D-cylinder, its surface is surrounded by the vortical layer and there is no vortex shed from the D-cylinder, the ‘attached vortex mode’. The ‘Kármán vortex street’ is formed at the front of the plate when it is placed further behind the D-cylinder, the ‘vortex street mode’. Compared with the effects of Reynolds number, the material parameters do not play a crucial role on the plate’s oscillation behavior. The drag forces which act on the plate are related to the flow structures. When the distance is smaller with S/L=1.5, the plate is located in the suction domain and negative drag acts on the plate initially. For the large distance case, when the incoming shed vortex contacts the plate’s head, a low pressure domain is generated and this results in lower drag. The ‘vortex street mode’ can get more kinetic and strain energy by the plate, since the shed vortices make the plate’s deformation mode more complex and the oscillation frequency is also larger than the one of the ‘attached vortex mode’.

The effects of hydrodynamics load on the heave and pitch coupling oscillations of a plate

Experimental and Numerical Study of the Effects of Heave Plate on the Motion of A New Deep Draft Multi-Spar Platform

Experimental Investigations on the Hydrodynamic Characteristics of Heave Plate

Nonlinear Control for an Active-passive Hybrid Compensation System

Influence of Heave Plate on the Dynamic Response of a 10 MW Semisubmersible Floating Platform

Experimental investigation on the hydrodynamic effects of heave plates used in floating offshore wind turbines

Vibration of a Plate Coupled with Fluid Considering the Effects of Stress and Deformation under Hydrostatic Load

Hydrodynamic characteristics of an oscillating circular disk under steady in-plane current conditions

Hydrodynamic Coefficients of Oscillating Flat Plates at 0.15 <= Kc <= 3.15

The Forced Oscillation Tests on Heave Damping Plates

Influence of Damping Plate Size on Pitch Motion Response of Floating Offshore Wind Turbine

Influence of an Integral Heave Plate on the Dynamic Response of Floating Offshore Wind Turbine Under Operational and Storm Conditions

Effects of Heave Plate on the Hydrodynamic Behaviors of Cell Spar Platform

Research on the Effect of a Heave Plate on the Dynamics of the Floating Wind Turbine Using Model Tests

Analytical Study on the Effect of a Horizontal Perforated Plate on Sloshing Motion in a Rectangular Tank

Simulations of passive oscillation of a flexible plate in the wake of a cylinder by immersed boundary method

Effects of Reynolds Number on the Hydrodynamic Characteristics of Heave Damping Plate

Dynamic Behavior of Piled Jacket Offshore Wind Turbines Based on Integrated Aero-Servo-hydro-ssi-owt Model

Scale Effects on Heave Plates for Semi-Submersible Floating Offshore Wind Turbines: Case Study With a Solid Plain Plate

Numerical Simulation of Hydrodynamic Forces of Heave Plate

Numerical Investigation of Damping Effects on Coupled Heave and Pitch Motion of an Innovative Deep Draft Multi-Spar