Abstract:In this study, we propose using a polymethylmethacrylate (PMMA) micropillar-based quartz crystal microbalance (micropillar-QCM) sensor for simultaneous measurement of exhaled breath temperature (EBT) and relative humidity (RH). The micropillar-QCM device, fabricated by nanoimprinting lithography, exhibits enhanced sensitivity due to the unique resonance phenomena formed between the vibrating micropillars and quartz substrate. The resonance frequency of the micropillar-QCM shifts in response to changes in the mechanical property – Young’s modulus of PMMA due to the temperature and humidity variations. Experimental results demonstrate that the frequency shift is linearly dependent on the temperature change within the range of 25–35 °C and follows a power law relationship with relative humidity (RH) within the range of 50%− 90%. The sensor exhibits excellent sensitivity in temperature and humidity measurements with limit of detections (LODs) of 0.09 °C and 0.35% respectively. In addition, the temperature change has little effect on the bandwidth of the signal of micropillar-QCM while its bandwidth decreases linearly with the increasing relative humidity. As a result, the combination of the resonance frequency shift and bandwidth of the micropillar-QCM sensor can be utilized to predict the temperature and relative humidity simultaneously. The finding highlights the potential of the micropillar-QCM sensor for applications requiring accurate and real-time temperature and humidity measurements, such as breath analysis, environmental monitoring, and healthcare.

Simultaneous humidity and temperature measurement with micropillar enhanced QCM sensors

MXene/MWCNT Electronic Fabric with Enhanced Mechanical Robustness on Humidity Sensing for Real-Time Respiration Monitoring

A Hybrid Wireless Electrodeless QCM-D for the Discrimination of Volatile Organic Compounds

Room Temperature VOCs Sensing with Termination‐Modified Ti3C2Tx MXene for Wearable Exhaled Breath Monitoring

Sodium Alginate/MXene-Based Flexible Humidity Sensors with High-Humidity Durability and Application Potentials in Breath Monitoring and Non-Contact Human–Machine Interfaces

A Wireless Electrode-Free QCM-D in a Multi-Resonance Mode for Volatile Organic Compounds Discrimination

Guar Gum/Ethyl Cellulose-Polyvinyl Pyrrolidone Composite-Based Quartz Crystal Microbalance Humidity Sensor for Human Respiration Monitoring

High-sensitivity QCM humidity sensor based on chitosan/carboxymethylated multiwalled carbon nanotubes composite for non-contact respiratory monitoring

Quartz-enhanced photoacoustic spectroscopy as a platform for non-invasive trace gas analyser targeting breath analysis

Relative Humidity Measurement Technology Based on Microcantilever Resonance

Microwave humidity sensor based on carbon dots-decorated MOF-derived porous Co3O4 for breath monitoring and finger moisture detection

Dual-mode Microring Resonator for Humidity Sensing with Temperature Compensation

On-Chip Simultaneous Sensing Of Humidity And Temperature With A Dual-Polarization Silicon Microring Resonator

An MMF–HCF Reflective SPR Sensor for Simultaneous Measurement of Temperature and Relative Humidity

Polyimide-Based High-Performance Film Bulk Acoustic Resonator Humidity Sensor and Its Application in Real-Time Human Respiration Monitoring

Monolithically Integrated Bidirectional Flow Sensor and Stacked Temperature/Humidity Sensor Based on CMOS-Compatible MEMS Technology

Hollow NiCo-LDH polyhedrons for 1-second level humidity detection and respiratory monitoring

Simultaneous Measurement of Temperature and Relative Humidity Using Cascaded C-shaped Fabry-Perot interferometers

MOF/PDMS Hybrid Nanofilm-based QCM for VOC Selective Virtual Sensing in High-Humidity Environments

Real-world evaluation of a QCM-based biosensor for exhaled air

A humidity sensor based on quartz crystal microbalance using graphene oxide as a sensitive layer