Abstract:Traditional Diameter at Breast Height (DBH) mensuration is labor-intensive and costly. This scoping study explored the possibility of using the Apple iPad Pro Light Detection And Ranging (LiDAR) sensor to estimate DBH. Three plots were scanned in a research plantation near Thunder Bay, Canada. Sites consisted of either Black Spruce (Picea mariana) or Red Pine (Pinus resinosa) planted with different initial densities. DBH was manually measured for validation. Point clouds were acquired for each plot using three scanning patterns; circular, figure-8, and transect. Single and five cross sections of 4 or 10 cm in thickness were extracted from each point cloud, centered at 1.3 m above the ground. Two circle fitting algorithms (Pratt, Taubin) and two ellipse fitting algorithms (Taubin, Szpak) were applied to the extracted cross-sections to estimate DBH. Scanning pattern and curve-fitting formula significantly impacted DBH estimate accuracy ( p -value ≤ 0.001), while cross-section count and thickness did not. The circular scanning pattern with a single 4 cm cross-section and a combination of circle- and ellipse-fitting formulas was the most accurate DBH estimation method (RMSE = 1.1 cm; 6.17%). Le diamètre à la hauteur de poitrine (DHP) est mesuré traditionnellement en utilisant des méthodes coûteuses et nécessitant une importante main-d'œuvre. Cette étude a exploré la possibilité d'utiliser le capteur de détection et de télémétrie par ondes lumineuses (LiDAR) d'Apple, iPad Pro, pour estimer le DHP. Trois parcelles ont été scannées dans une plantation de recherche près de Thunder Bay, Ontario, Canada. Les sites étaient constitués d'épinettes noires (Picea mariana) ou de pins rouges (Pinus resinosa) plantés avec différentes densités. Le DHP a été mesuré manuellement pour validation. Des nuages de points ont été acquis pour chaque parcelle à l'aide de trois méthodes de balayage; circulaire, figure-8 et transect. Une seule section et cinq sections transversales de 4 ou 10 cm d'épaisseur ont été extraites de chaque nuage de points, centrées à 1.3 m au-dessus du sol. Deux algorithmes d'ajustement circulaire (Pratt, Taubin) et deux algorithmes d'ajustement d'ellipse (Taubin, Szpak) ont été appliqués aux sections transversales extraites pour estimer le DHP. Le modèle de balayage et la formule d'ajustement de courbe ont eu une incidence significative sur la précision de l'estimation du DHP (p ≤ 0,001), tandis que le nombre de sections transversales et l'épaisseur n'ont pas eu d'incidence significative. Le modèle de balayage circulaire avec une seule section transversale de 4 cm et une combinaison de formules d'ajustement basées sur le cercle et l'ellipse était la méthode d'estimation la plus précise du DHP (RMSE = 1.1 cm; 6.17%).

Estimating Tree Diameter at Breast Height (DBH) Using iPad Pro LiDAR Sensor in Boreal Forests

Online Estimation of Diameter at Breast Height (DBH) of Forest Trees Using a Handheld LiDAR

Tree parameter estimation with iPhone point cloud data using multiple algorithms

Biomass Calculations of Individual Trees Based on Unmanned Aerial Vehicle Multispectral Imagery and Laser Scanning Combined with Terrestrial Laser Scanning in Complex Stands

Estimation of Diameter at Breast Height in Tropical Forests Based on Terrestrial Laser Scanning and Shape Diameter Function

Accuracy Assessment and Error Analysis for Diameter at Breast Height Measurement of Trees Obtained Using a Novel Backpack LiDAR System

A handheld device for measuring the diameter at breast height of individual trees using laser ranging and deep-learning based image recognition

A Reliable DBH Estimation Method Using Terrestrial LiDAR Points through Polar Coordinate Transformation and Progressive Outlier Removal

Use of a Consumer-Grade UAV Laser Scanner to Identify Trees and Estimate Key Tree Attributes across a Point Density Range

Automated methods for measuring DBH and tree heights with a commercial scanning lidar

Reconstruction and analysis of a deciduous sapling using digital photographs or terrestrial-LiDAR technology

Estimating Forest Structure from UAV-Mounted LiDAR Point Cloud Using Machine Learning

A novel method based on kernel density for estimating crown base height using UAV-borne LiDAR data

Exploring the Potential of UAV LiDAR Data for Trunk Point Extraction and Direct DBH Measurement

Applicability of personal laser scanning in forestry inventory

An Automated Pipeline for Extracting Forest Structural Parameters by Integrating UAV and Ground-Based LiDAR Point Clouds

Automatic Forest DBH Measurement Based on Structure from Motion Photogrammetry

Evaluation of UAS LiDAR data for tree segmentation and diameter estimation in boreal forests using trunk- and crown-based methods

Digital Aerial Photogrammetry (DAP) and Airborne Laser Scanning (ALS) as Sources of Information about Tree Height: Comparisons of the Accuracy of Remote Sensing Methods for Tree Height Estimation

Very High Density Point Clouds from UAV Laser Scanning for Automatic Tree Stem Detection and Direct Diameter Measurement

Delineation of individual deciduous trees in plantations with low-density LiDAR data