Abstract:In central hot-spot ignition of inertial confinement fusion (ICF), a spherical capsule containing deuterium-tritium (DT) fusion fuel is imploded to a much smaller sphere so as to achieve high fuel density and high temperature in the central hot spot, triggering ignition and producing significant thermonuclear output. Low-adiabat (entropy) implosions maximize the fuel compression. Unfortunately, experiments on the National Ignition Facility has demonstrated that the hydrodynamic instability, which leads to hot-spot deformation, main-fuel-layer distortion and ablator mixing into the hot spot, is much prominent than expected [1]. High-foot high-adiabat implosions, with higher ablation velocities and larger density gradient scale lengths, are designed to reduce ablation-front Rayleigh-Taylor instability induced mixing of ablator material into the DT hot spot [2]. Nevertheless, the laser energy required for ignition is approximately proportional to the square of the fuel adiabat, and it seems hard to design a high-adiabat ignition target for the current mega joule laser facilities. In this report, we propose a design of a wedged-peak-pulse at late stage of the indirect drive, for a medium fuel adiabat. First, during the wedged-peak-pulse the radiation drive grows gradually creating a series of compression waves which compress the fusion fuel without significantly raising the fuel adiabat. Second, the compression waves merges as they travel into the hot spot forming a strong inward shock wave or compression wave, which prohibits the reflection of the outward rebounding shock (from the spherical center) at the interface of the hot spot and main fuel layer, thus stabilizing the deceleration stage hydrodynamic instability. With the wedged-peak-pulse, the fuel adiabat is kept at reasonable value such that the one-dimensional (1D) performance of the capsule is better than that of the high-foot implosions and comparable to that of the low-foot implosions. Meanwhile, the hydrodynamic instability, at both the ablator/fuel interface and hot-spot/main-fuel interface, are significantly reduced as compared with low-foot implosions. Simulations with the LARED-JC code indicate that the wedged-peak pulse is achievable with a (cylinder) hohlraum driven by a laser facility with energy of ~2.0MJ. Moreover, our scheme is also robust with respect to the maximum radiation temperature. We expect that the new type of design would be a good way for indirect-drive ICF on mega-joule laser facilities.

Analysis of fusion fuel conditions and instability development in shocklessly compressed MagLIF implosion simulations

Numerical study of implosion instability mitigation in magnetically driven solid liner dynamic screw pinches

Development of a high performance MagLIF target platform using high aspect ratio coated liners and low-mix laser preheat

Design and Modeling of Indirectly-Driven Magnetized Implosions on the NIF

A semi-analytic model of magnetized liner inertial fusion

Visualizing Magnetically Driven Converging Radiative Shock Generated in Z-pinch Foil Liner Implosion

Controlling morphology and improving reproducibility of magnetized liner inertial fusion experiments

Axial magnetic field injection into thick, imploding liners

Main Drive Optimization of a High-Foot Pulse Shape in Inertial Confinement Fusion Implosions

A Near One-Dimensional Indirectly Driven Implosion at Convergence Ratio 30

Magnetized directly-driven ICF capsules: increased instability growth from non-uniform laser drive

Laser-driven magnetized liner inertial fusion

Magnetization around mix jets entering inertial confinement fusion fuel

Investigation of Ion Kinetic Effects in Direct-Drive Exploding-Pusher Implosions at the NIF

Validation of implosion modeling through direct-drive shock timing experiments at the National Ignition Facility

Pulsed-power-driven Cylindrical Aluminium Liner Implosions with a High Aspect Ratio at an 8 MA Facility

Burn Propagation in Magnetized High-Yield Inertial Fusion

Fusion Ignition Via a Magnetically-Assisted Fast Ignition Approach

How Shock ignition can help to overcome the negative effects of hot electrons in direct-drive high-gain inertial confinement fusion

Simulation of self-generated magnetic fields in an inertial fusion hohlraum environment

A wedged-peak-pulse design with medium fuel adiabat (entropy) for indirect-drive fusion