Abstract:Flocculation has been widely employed in treatment of mineral tailings and water management. In this study, a chitosan-graft-poly(acrylamide-dimethyl diallyl ammonium chloride) (Chi-g-P(AM-DMDAAC)) was synthesized in-house. The adsorption and interaction mechanisms of Chi-g-P(AM-DMDAAC) and an anionic polyacrylamide (APAM) in a two-step flocculation process of kaolinite were explored using settlement tests, zeta potential measurement, quartz crystal micro-balance with dissipation (QCM-D) and atomic force microscopy (AFM) technique. The type of primary flocculant was critical for the two-step flocculation process. The treatment of the kaolinite suspension using 1 mg/L of Chi-g-P(AM-DMDAAC) followed by adding 2 mg/L of APAM displayed more efficient flocculation performance. QCM-D results showed that three dissipative layers were assembled on model kaolinite surface after sequentially injecting 3.5 mg/L of Chi-g-P(AM-DMDAAC), 0.05 wt% kaolinite suspension and 2.5 mg/L of APAM. The above total adsorption amount (Delta f of -64.9 Hz) was much higher than that of using the two flocculants in reverse order (Delta f of -23.1 Hz). This result indicated that the adsorption layer of the positively charged Chi-g-P (AM-DMDAAC) on kaolinite surface provided active adsorption sites for APAM. Further AFM measurement confirmed that the average adhesion between the silicon tip adsorbed Chi-g-P(AM-DMDAAC) and model kaolinite surface in 2.5 mg/L APAM solution increased from 0.25 +/- 0.1 nN to 4.2 +/- 0.3 nN with the effective interaction range of 700 nm, which was stronger than that measured between a bare silicon tip and silica substrate in single-componentflocculant solutions. The highly efficient two-step flocculation process could be ascribed to the strong electrostatic attraction between the kaolinite and the oppositely charged Chi-g-P(AM-DMDAAC) and APAM. Findings in this study will benefit the development of environmentally friendly flocculant for mineral tailings and water treatment. (c) 2021 Elsevier B.V. All rights reserved.

A role of chain flexibility of polyacrylamide-based flocculants in flocculation of fine quartz

Formation, breakage, and re-growth of quartz flocs generated by non-ionic high molecular weight polyacrylamide

Effect of nitrate or sulfate on flocculation properties of cationic polymer flocculants

Synergistic mechanism of adsorption-diffusion at quartz-water interface for the dewatering of waste slurry using APAM flocculant: Insights from molecular dynamics simulation

Observation on reversibility of flocculation in fine quartz suspensions

Study on flocculation performance and mechanism of cationic polyacrylamide on montmorillonite: Insights from experiments and molecular simulations

Factors affecting the selective flocculation of hydroxyapatite from quartz and/or calcite mixtures

Synthesis of a new flocculant based on poly(acrylamide-co-(N-octyl-4-vinylpyridinium bromide)) [AM5/VP5C8Br]-application for the turbidity removal from clay suspension

Molecular Dynamics Study of Interaction between Acrylamide Copolymers and Alumina Crystal

Understanding the flocculation mechanism of quartz and kaolinite with polyacrylamide in seawater: A molecular dynamics approach

Effect of Electrolytes on Interactions Between a Novel Organic-Inorganic Hybrid Polymer Flocculant and Kaolinite Particles

Adsorption and Interaction Mechanisms of Chi-g-P(AM-DMDAAC) Assisted Settling of Kaolinite in a Two-Step Flocculation Process.

UV-initiated polymerization of hydrophobically associating cationic flocculants: Synthesis, characterization, and dewatering properties

Quantifying the effect of polyacrylamide dosage, Na+ and Ca2+ concentrations, and clay particle size on the flocculation of mature fine tailings with robust statistical methods

Flocculation performance enhancement of organic polymer flocculants via adjusting cationic block length: Molecular structure and characteristics

Effects of a New Synthetic Fe-PAM Flocculants on Filtration and Consolidation of Bentonite Slurry

Comparative study on the effectiveness of hydrophobically modified cationic polyacrylamide groups in the flocculation of kaolin

Synthesis and Flocculation Properties of Poly(diallyldimethyl Ammonium Chloride–vinyl Trimethoxysilane) and Poly(diallyldimethyl Ammonium Chloride–acrylamide–vinyl Trimethoxysilane)

Effect of hydrophobic group on flocculation properties and dewatering efficiency of cationic acrylamide copolymers

Silica Functionalized Almond Gum Derivatives for Integrated Flocculation Cycles for Natural and Synthetic Water Systems

Characterization and Dimethyl Phthalate Flocculation Performance of the Cationic Polyacrylamide Flocculant P(AM-DMDAAC) Produced by Microwave-Assisted Synthesis