Abstract:The film capacitor, one typical type of electrostatic capacitors, exhibits its unique advantages in the high-power energy storage devices operating at a high electric field due to the high electrical breakdown strength (Eb) of the polymeric films. However, the development of film capacitor towards high energy storage density is severely hindered by the low dielectric constant (ε) and low charge-discharge efficiency (η) of the polymeric films. The film of polypropylene (PP), the most used polymeric film with a market share of 50%, owns a high η due to its low inherent hysteresis loss. Yet the low ε (2.2 at 103 Hz) impedes the increase of its energy storage density (1-2 J/cm3). Here we demonstrate that the discharged energy density (Ue) of PP film could be largely increased from 1.40 J/cm3 of pure PP film to 3.86 J/cm3 of PP nanocomposite film by incorporating a small loading of core-shell structured 3 () nanoparticles (2.27 vol%) into PP matrix. The obtained Ue of 3.86 J/cm3, to the best of our knowledge, is the highest reported value for the PP based films using commercial PP resin. Meanwhile, the η merely undergoes a slight decrease from 99.5% to 94.1%. Similarly, the obtained η of 94.1%, to the best of our knowledge, is also the highest value for the polymeric films reported in the previous works. The significant increase of Ue (175.7%) and negligible decrease of η (5.4%) are mainly attributed to the increase of ε from 2.2 to 3.7 and Eb from 361 MV/m to 448 MV/m. Compared with the films of raw BT/PP nanocomposites, the Ue exhibits a significant increase of 365.1% from 0.83 J/cm3 to 3.86 J/cm3 and the η also displays an increase of 7.4% from 87.6% to 94.1%. The significant improvement of energy storage performance achieved in the film of /PP nanocomposite suggests that the organic PMMA shell plays an important role in the amelioration of compatibility of BT nanoparticles and PP matrix and the alleviation of local electric field concentration. Moreover, the PMMA shell could also provide a robust scaffold to hinder the early breakdown failure of nanocomposites due to its high Eb (425 MV/m). Thus, high ε, low loss and high Eb were simultaneously achieved. Specifically, the high hot stretch ratio (1:4) of nanocomposite film indicates the strong feasibility of industrialized film processing. Apart from the experimental analysis, theoretical analysis using the simulation of finite element is also carried out to figure out the influence of organic PMMA shell on the dielectric performance of PP nanocomposites films. These findings enable the development of film capacitor using non-polar PP based film towards high energy storage density.

2D Nanosheet Spray Coating for Scalable Processing of High‐Energy‐Density Dielectric Polymer Films

Greatly Enhanced Energy Density in Polymer Nanocomposites Coated with High-K Perovskite Nanosheets

Improved energy density and efficiency of polymer nanocomposites by filling ultralow amounts of 2D Ni(OH)2 nanosheets and building sandwich structure

Surface Engineering of 2D Dielectric Polymer Films for Scalable Production of High-Energy-Density Films

All-Organic Sandwich-Structured Bopp/Pvdf/Bopp Dielectric Films with Significantly Improved Energy Density and Charge-Discharge Efficiency

A Microwave-Assisted, Solvent-Free Approach for Effective Grafting of High-Permittivity Fillers to Construct Homogeneous Polymer-Based Dielectric Film with High Energy Density

Ultrahigh Energy Density in Continuously Gradient‐Structured All‐Organic Dielectric Polymer Films

High Energy Density in layered 2D Nanomaterial based Polymer Dielectric Films

Achieving Significantly Boosted Dielectric Energy Density of Polymer Film via Introducing a Bumpy Gold/Polymethylsilsesquioxane Granular Blocking Layer

High energy density and discharge efficiency polypropylene nanocomposites for potential high-power capacitor

Review of Polymer‐Based Nanodielectric Exploration and Film Scale‐Up for Advanced Capacitors

Bilayer-Structured Polymer Nanocomposites Exhibiting High Breakdown Strength and Energy Density via Interfacial Barrier Design

γ‐Ray Irradiation Significantly Enhances Capacitive Energy Storage Performance of Polymer Dielectric Films

Ultrahigh Capacitive Energy Density in Stratified 2D Nanofiller-Based Polymer Dielectric Films

Polymer Capacitor Films with Nanoscale Coatings for Dielectric Energy Storage: A Review

Massively Parallel Aligned Poly(vinylidene fluoride) Nanofibrils in All-Organic Dielectric Polymer Composite Films for Electric Energy Storage

High Energy Density Polymer Dielectrics Interlayered by Assembled Boron Nitride Nanosheets

Polymer Nanocomposites with High Energy Density Utilizing Oriented Nanosheets and High-Dielectric-Constant Nanoparticles

Roll-to-roll Fabricated Polymer Composites Filled with Subnanosheets Exhibiting High Energy Density and Cyclic Stability at 200 °C

Two-Dimensional High-k Nanosheets for Dielectric Polymer Nanocomposites with Ultrahigh Discharged Energy Density

Ultrahigh discharge efficiency in multilayered polymer nanocomposites of high energy density