Abstract:Thermochemical conversion provides promising approaches for utilization of agroforestry residues as energy sources in rural areas, such as decentralized biomass combustion and gasification. Understanding of the pyrolysis characteristics are crucial for the design of reactors and optimization of working conditions, but in these scenarios, utilization of centimeter-sized large fuel particles will bring challenges in predicting the evolution of pyrolytic products owing to the intraparticle secondary reactions. In this work, the product distribution of biomass pyrolysis was investigated in wide ranges of temperatures and particle sizes, and special attention was paid to the pyrolysis of centimeter-sized fuel particles under medium to high temperatures (500 °C – 900 °C). The yields of solid/liquid/gas-phase products were quantified, and the composition of tar and gas products were qualitatively and quantitatively evaluated, aiming at illustrating the effects of intraparticle secondary reactions. The results have shown that the differences between the product distribution of sawdust (<1 mm) and centimeter-sized wood cubes were significant over the whole temperature range, but the differences between wood cubes with varying sizes (1 cm, 1.5 cm and 2 cm) were dependent with the external temperature, indicating that the extent of intraparticle secondary reactions was simultaneously determined by external temperature and particle size. The evolution of tar composition indicated that the intraparticle secondary reactions could be divided into two distinctive steps. Increasing the particle size would firstly result in fast consumption of primary tar species and emergence of secondary tar species, while the second step would lead to the formation of simple phenols and aromatics, and large quantities of PAHs were released for centimeter-sized fuel particle under high temperatures (≥800 °C). Kinetic analysis further revealed that the first step was mainly transport controlled and sensitive to particle size, while the second step was jointly controlled by kinetics and transport, which appeared to be significant only if the particle size was large and simultaneously the temperature was sufficiently high.

EFFECT OF TAR DECOMPOSITION ON GAS GENERATION DURING PYROLYSIS IN PACKED BED OF WOODY BIOMASS

NUMERICAL SIMULATION OF HEAT TRANSFER AND HETEROGENEOUS CHEMICAL REACTIONS IN A BIOMASS PARTICLE DURING PYROLYSIS

Experimental investigation of intraparticle secondary reactions of tar during wood pyrolysis

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

New Pyrolysis Model for Biomass Particles in a Thermally Thick Regime

The Thermal Treatment Properties of the Tars from Sewage Sludge Gasification

Product distribution from pyrolysis of large biomass particle: Effects of intraparticle secondary reactions

Py-GC/MS Study on Tar Formation Characteristics of MSW Key Component Pyrolysis

Torrefaction of Various Biomass Feedstocks and Its Impact on the Reduction of Tar Produced during Pyrolysis

Effect of temperature and AAEM species on fast pyrolysis of biomass tar

Characterization of Tar from Sawdust Gasified in the Pressurized Fluidized Bed

Experimental and numerical investigation of tar destruction under partial oxidation environment

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis

Effects of Catalyst Particle Size and Mass on Catalytic Cracking of Biomass Pyrolysis Tar

Generation features and kinetics of gas products in bio-tar catalytic cracking by char for biomass gasification

APPLICATIO STUDY ON KINETICS OF BIOMASS PYROLYSIS IN THE FIXED BED. 1. SIMULATION AND NUMERICAL ANALYSIS OF LIGNIN THERMAL DECOMPOSITION

Characterization of tar evolution during DC thermal plasma steam gasification from biomass and plastic mixtures: Parametric optimization via response surface methodology

Characterization of tar formation during high temperature gasification of different chemical compositions in biomass

Pyrolysis Characteristics and Determination of Kinetic and Thermodynamic Parameters of Raw and Torrefied Chinese Fir

CATALYTIC CRACKING OF TAR DERIVED FROM BIOMASS PYROLYSIS

Influence of Temperature on Products from Fluidized Bed Pyrolysis of Wood and Solid Recovered Fuel