Abstract:Due to the chemical reactivity of the electrolyte, electrolyte decomposition often occurs at the electrode-electrolyte interface during cycling, which can lead to a loss in LIB performance. On the anode side, however, the formation of a stable Solid Electrolyte Interphase (SEI) is essential for the safe operation of Lithium-ion batteries (LIBs). The SEI layer, which is permeable for Li + ions, protects the electroactive materials from direct contact with the electrolyte, thereby inhibiting further electrolyte decomposition. In the formation cycles of fresh cells, electrolyte degradation is primarily attributed to the SEI formation processes at the anode. Several literature reports have confirmed that the newly formed interphase consists of organic and inorganic decomposition products of the electrolyte. 1 To increase battery performance, cycle life and safety, it is essential to form a stable SEI. 2 A common strategy to stabilize the SEI is to use additives in the electrolyte composition. The additives should exhibit higher reduction potentials than other electrolyte components to enable preferential reduction and incorporation into the SEI. The most common SEI forming additives are fluoroethylene carbonate (FEC) and vinylene carbonate (VC). They both decompose during the formation cycle to form a polymeric layer at the electrode surface. The electrolyte decomposition reactions which lead to SEI formation are usually accompanied by gaseous side products. The evolving gas species form a complex gas mixture which can be separated by gas chromatography (GC) into their individual components and subsequently identified by mass spectrometry (MS). While operando GC/MS gives information on the volatile side products of the electrolyte decomposition reactions, X-ray photoelectron spectroscopy (XPS) can be used to identify the degradation products that form on the surface of the electrode and are incorporated into the SEI. The combination of the two techniques allows a more comprehensive picture of SEI formation processes to be drawn. In this work, operando GC/MS of Lithium-ion full cells with NMC 811 cathodes and graphite anodes was used to compare the gas species evolving during the formation reactions in an electrolyte with the composition of 1M LiPF 6 in EC/DEC 1:1 with FEC and VC electrolyte additives in a ratio of 1w%, respectively. In a comparative study we present the decomposition pathways of the electrolytes with and without SEI forming additives by analysing the composition of the gas phase as a function of cell potential. We observe that the complex gas mixture consists of carbonate components originating from transesterification reactions and evaporation of the volatile electrolyte. In addition, inorganic components such as carbon monoxide and carbon dioxide are produced, which mainly stem from the degradation of cyclic carbonates. Furthermore, the gas phase consists of saturated and unsaturated hydrocarbons which can be ascribed to the linear carbonate components as well as ether and carbonyl components. We have also observed that it is possible to distinguish between volatile compounds which form during the charge and discharge processes, respectively. The increased gas evolution at the beginning of the formation cycle confirms that a substantial part of the passivation layer is formed during charge. Finally, operando GC/MS was also used to monitor the evolution of the decomposition products during battery operation at overcharge conditions. Acknowledgement: The author gratefully acknowledges the FFG (Austrian Research Promotion Agency) for funding this research within project No. 879613 References: Verma, P., Maire, P. & Novák, P. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries. Electrochim. Acta 55 , 6332–6341 (2010). Qian, Y. et al. Investigations on the electrochemical decomposition of the electrolyte additive vinylene carbonate in Li metal half cells and lithium ion full cells. J. Power Sources 332 , 60–71 (2016).

Identifying Thermal Decomposition Mechanisms of the Solid Electrolyte Interphase with in-Situ Gas Analysis of Lithium-Ion Batteries

Decomposition Mechanism of Lithium Methyl Carbonate with Electrolyte in the Solid Electrolyte Interphase to Elucidate the Early Stages of Thermal Runaway in Lithium-Ion Batteries

Full-Dimensional Analysis of Gaseous Products to Unlocking In Depth Thermal Runaway Mechanism of Li-Ion Batteries

Unlocking the Thermal Safety Evolution of Lithium-Ion Batteries under Shallow Over-Discharge

In Situ Detecting Thermal Stability of Solid Electrolyte Interphase (SEI)

Methods–Temperature-Dependent Gassing Analysis by On-Line Electrochemical Mass Spectrometry of Lithium-Ion Battery Cells with Commercial Electrolytes

Investigation of Gas Evolution by Operando GC/MS from SEI Forming Additives in Lithium-Ion-Batteries

Identification and Quantification of Decomposition Mechanisms in Lithium-Ion Batteries; Input to Heat Flow Simulation for Modeling Thermal Runaway

Experimental Evaluation of Thermolysis-Driven Gas Emissions from LiPF 6 -Carbonate Electrolyte Used in Lithium-Ion Batteries

Modeling Thermal Runaway of Large Format All-Solid-State Lithium Metal Cells during a Thermal Ramp Test and Short Circuit: Sensitivity Analysis and Reaction Pathways

Quantifying the Thermochemistry of Kinetic Transitions in a Li/Llzo/Layered Metal Oxide Cathode Solid-State Battery with Varying Cathode States of Charge

Impact of electrolyte impurities and SEI composition on battery safety

Operando gas chromatography mass spectrometry for the continuous study of overcharge-induced electrolyte decomposition in lithium-ion batteries

Unlocking the self-supported thermal runaway of high-energy lithium-ion batteries

In Situ Mass Spectrometry Studies of Gas Evolution Reactions During Cell Cycling in Aqueous Lithium Ion Batteries

Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes

Modeling Thermal Behavior and Safety of Large Format All-Solid-State Lithium Metal Batteries under Thermal Ramp and Short Circuit Conditions

Thermal Runaway and Soot Production of Lithium-Ion Batteries: Implications for Safety and Environmental Concerns

In situ observation of thermal-driven degradation and safety concerns of lithiated graphite anode

Toxicity, Emissions and Structural Damage from Lithium-Ion Battery Thermal Runaway

Quantum Chemical Calculation Study on the Thermal Decomposition of Electrolyte During Lithium-Ion Battery Thermal Runaway