Abstract:<p>The building envelope performance significantly influences the building energy consumption, and the major influencing factors of the building envelope include the external wall U-value, external wall solar absorptance, roof U-value, roof solar absorptance, external window U-value, and window-to-wall ratio. This paper proposed a framework that integrates Building Information Modeling (BIM) with LSSVM (least square support vector machine (LSSVM) and non-dominated sorting genetic algorithm-II (NSGA-II) to study the influence of building envelope parameters on building energy consumption and discover the best design. The DesignBuilder (DB) is used to perform energy consumption simulation and orthogonal experiment to obtain the sample data set. The LSSVM is utilized to learn the data set to establish a prediction model between the building envelope and energy consumption, which is used as the fitness function of the building energy consumption in NSGA-II. With the objective of minimizing building energy consumption and maximizing the indoor thermal comfort (measured by predicted mean vote or PMV), an NSGA-II multi-objective optimization model is established. The Pareto front is obtained through calculation, and the optimal combination of building envelope parameters is discovered using the ideal point method. A case of a proposed school building in China is used to demonstrate the feasibility and effectiveness of the developed framework, the results show that: (1) The LSSVM has great ability to predict building energy consumption, achieving an accurate prediction with a goodness-of-fit of 0.9549 and an RMSE of 0.0273; (2) The optimized envelope design parameters of the proposed building are presented, including the External wall U-value is 0.2, the External wall solar absorptance is 0.55, the Roof U-value is 0.2, the External window U-value is 0.4166, the External window U-value is 1, the Window-wall ratio is 0.215. (3) The developed LSSVM-NSGA II hybrid approach can effectively improve the building's energy consumption and thermal comfort with the building energy consumption reduced by 10.6% and the thermal comfort increased by 32.2% than the initial values, respectively. The proposed LSSVM-NSGA II framework is able to optimize building envelope design parameters than its precedent, which can provide effective thinking for similar problems.</p>

Optimization and prediction of energy consumption, light and thermal comfort in teaching building atriums using NSGA-II and machine learning

Energy Efficiency Optimization Strategies for University Research Buildings with Hot Summer and Cold Winter Climate of China Based on the Adaptive Thermal Comfort

Multi-Objective Optimization Design of Geometric Parameters of Atrium in nZEB Based on Energy Consumption, Carbon Emission and Cost

Optimal Design for Passive Energy-saving Strategies of Atrium in Commercial Buildings

Investigating the Temperature Distribution of Non-Enclosed Atriums with Air Infiltration in Winter

Indoor thermal nonuniformity of atrium-centered public building: Monitoring and diagnosis for energy saving

Predicting the Temperature Distribution of a Non-Enclosed Atrium and Adjacent Zones Based on the Block Model

Atrium energy efficiency design based on dimensionless index parameters for office building in severe cold region of China

Multi-objective optimization of energy, thermal and visual comfort for dormitory buildings in the cold climate of China

On-site measurement and zonal simulation on winter indoor environment and air infiltration in an atrium in a severe cold region

Multi-objective optimization of residential building energy consumption, daylighting, and thermal comfort based on BO-XGBoost-NSGA-II

Multiobjective optimization of building energy consumption based on BIM-DB and LSSVM-NSGA-II

Building information modelling-enabled multi-objective optimization for energy consumption parametric analysis in green buildings design using hybrid machine learning algorithms

DYNAMIC SIMULATION OF ATRIUM THERMAL ENVIRONMENT AIDING BUILDING DESIGN

Numerical investigations of buoyancy-driven natural ventilation in a simple atrium building and its effect on the thermal comfort conditions

Thermal performance of atria: An overview of natural ventilation effective designs

Multiobjective optimization of building energy consumption and thermal comfort based on integrated BIM framework with machine learning-NSGA II

Multi-objective optimization design for windows and shading configuration considering energy consumption and thermal comfort: A case study for office building in different climatic regions of China

Energy retrofitting of hospital buildings considering climate change: An approach integrating automated machine learning with NSGA-III for multi-objective optimization

Characteristics of thermal stratification and its effects on HVAC energy consumption for an atrium building in south China

Development of a back-propagation neural network and adaptive grey wolf optimizer algorithm for thermal comfort and energy consumption prediction and optimization