Abstract:Lithium (Li) metal is regarded as the holy grail among various anode candidates due to its extremely high specific energy and low electrochemical potential. Nevertheless, uncontrolled dendrite growth and an unstable electrode/electrolyte interface become the bottleneck for the development of rechargeable Li metal batteries. Although many research studies have focused on designing porous electrode architectures to reduce the local current density and delay the Li dendrite growth, constructing a stable reaction interface is still highly desired. Herein, we ingeniously designed a facile immersion and subsequent annealing method to fabricate a nitrogen-doped carbonized cellulose fiber (N-CF). The nitrogen element can not only bridge the polyacene reaction of cellulose in the process of lower calcination temperatures to improve the mechanical strength but also improve the lithophilic property of a current collector by nitrogen doping at higher calcination temperatures. Therefore, the as-synthesized N-CF can maintain good structural integrity during the cycle and promote the stability of the electrode/electrolyte interface. As a result, when matched with a commercial LiNi0.5Co0.2Mn0.3O2 cathode, the capacity retention of a N-CF//LiNi0.5Co0.2Mn0.3O2 full cell can reach as high as 83.1% after 250 cycles. Our work reveals a facile approach to regulate the Li deposition behavior and stabilize the electrode/electrolyte interface simultaneously.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08572?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08572</a>.Element mapping (Figure S1); the cross-sectional SEM image (Figure S2); XPS spectra (Figure S3); detailed voltage–capacity spectra (Figure S4); enlarged EIS spectra (Figure S5); nitrogen adsorption–desorption isotherms (Figure S6); enlarged voltage profiles of the symmetric Li metal cell (Figure S7); image comparison (Figure S8); the detailed SEM images of Li deposition morphology with the CF current collector after (a) 1 cycle and (b) 10 cycles (Figure S9); different magnification SEM figures of Li metal morphologies with CF (a–c) and N-CF (d–f) current collectors when deposited with 10 mAh cm–2 Li metal (Figure S10); the enlarged voltage profile of CF and N-CF electrodes at the first cycle (Figure S11); the tests of Li||NCM523 full cells at 1.0C with capacity ratios of anode/cathode of 3 (NCM loading of 16.254 mg cm–2) (Figure S12); the physical properties of CF and N-CF current collectors (Table S1); the specific capacity of the composite anode with CF (Table S2); mass content of different element in N-CF (Table S3); and voltage delay (Table S4) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08572/suppl_file/sc0c08572_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cellulose nanofiber-based nano-collector for highly sensitive preconcentration, spectrophotometric detection, and efficient recovery of Co(II) ions in lithium-ion battery waste

Selective separation and recovery of Co(II) and Ni(II) from lithium-ion battery using Cyanex 272 adsorptive membrane

Facile Prepared MOF-OH-PAN Nanofiber for Separation Co(II) from Waste Batteries

A Novel Cellulose-Based Composite Hydrogel Microsphere Material: for Efficient Adsorption of Co(II) and Ni(II) Ions in Water

Smart Sorption: Novel applications of cellulosic nanomaterials for selective critical metal recovery from black mass leachates through multibatch processes

Novel MOFs-based ion-imprinted polymer for selective separation of cobalt ions from waste battery leaching solution

Cellulose nanofibers (CNFs) in the recycling of nickel and cadmium battery metals using electrodeposition

Preparation of cellulose nanofiber/Fe3O4/CaCO3 magnetic biocomposite by air capture and its application on purifying lead-contaminated water: Removal, immobilization and separation

Self-Standing N-Doped Carbonized Cellulose Fiber as a Dual-Functional Host for Lithium Metal Anodes

Facile in situ synthesis of cellulose microcrystalline-manganese dioxide nanocomposite for effective removal of Pb(II) and Cd(II) from water

Nanoengineering cellulose for the selective removal of neodymium: Towards sustainable rare earth element recovery

Hollow self-floating microspheres capture cobalt (Co 2+ )/nickel (Ni 2+ ) ions from the acidic leachate of spent lithium-ion battery cathodes

Biomass-Derived Anion-Anchoring Nano-CaCO 3 Coating for Regulating Ion Transport on Li Metal Surface

Development of a Manganese Dioxide-Decorated Activated Carbon Nano-sorbent via Co-precipitation method for efficient lithium ion adsorption from aqueous solutions

Simultaneous Recovery of Metal Ions and Electricity Harvesting Via K-Carrageenan@ZIF-8 Membrane

Highly Conductive, Light Weight, Robust, Corrosion‐Resistant, Scalable, All‐Fiber Based Current Collectors for Aqueous Acidic Batteries

Selective Lithium separation from Li/Co/Ni mixtures using optimized flow-electrode capacitive deionization

Electrospun nanofiber membrane of dibenzo 14-crown-4-ether polyimide for efficient selective lithium recovery from discarded lithium-ion batteries

Binder-Free LiMn2 O4 Nanosheets on Carbon Cloth for Selective Lithium Extraction from Brine via Capacitive Deionization

In Situ Fabrication and Characterization of g-C3N4 onto Cellulose Nanofibers and Selective Separation of Heavy Metal Ions

Highly efficient re-cycle/generation of LiCoO2 cathode assisted by 2-naphthalenesulfonic acid