Abstract:Abstract The contamination of water resources by heavy metals (HMs), mainly introduced by anthropogenic resources, has been considered as a serious environmental issue in the recent era. Therefore, the conventional methods for heavy metal removal have various drawbacks in terms of cost, toxicity, and efficiency. The novel study investigated the biosorption intensity of raw and chemically modified sawdust (SD) and corn husk (CH) to eliminate chromium (III) from the aqueous solutions. SD and CH were used as biosorbents and were treated chemically with sulfuric acid (H2SO4), sodium hydroxide (NaOH), and detergent powder. The biosorption potential was estimated based on percentage removal efficiency (% RE) of chromium (III) and the adsorption intensity (qmax). The characterization of surface morphology and functional groups of biosorbents was studied by SEM and FTIR. Moreover, the adsorption isotherm models (Langmuir and Freundlich), kinetic models (pseudo-first-order kinetics and pseudo-second-order kinetics), and thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were also assessed to predict the biosorption process. The results of % RE revealed that detergent-treated SD (DTSD) and detergent-treated CH (DTCH) showed highest % RE of 9.27 ± 0.15 (%) and 99.16 ± 0.08 (%) for elimination of chromium (III), respectively. Similarly, base-treated SD (BTSD) and base-treated CH (BTCH) exhibited 95.53 ± 0.18 (%) and 92.43 ± 0.22 (%) of % RE compared with 77.87 ± 1.64 (%) and 81.96 ± 0.34 (%) removal efficiency of acid-treated SD (ATSD) and acid-treated CH (ATCH), respectively. The raw SD (RSD) and raw CH (RCH) showed lower % RE of 23.68 ± 1.52 (%) and 35.52 ± 4.74 (%) for Cr (III) removal. Further, the porosity on the biosorbent's surface and attached functional groups increased after chemical treatment and this variation resulted in increased removal efficiency after chemical treatments. The Langmuir isotherm model and the Freundlich isotherm model were employed to predict the biosorption process, and both these models are best-fitted. The pseudo-second-order kinetic model was promising representative of the biosorption data. The process was endothermic and the parameters indicated that Cr (III) biosorbtion was thermodynamically favorable. Therefore, the obtained results highlighted that detergent-treatment enhanced the % RE, and DTSD and DTCH are highly efficient biosorbents for eliminating Cr (III) from aqueous solutions. Thus, detergent-treated biosorbents are proved to be a promising sustainable, eco-friendly, and cost-effective way to treat HMs from aqueous solutions as they utilize natural agriculture waste products and also handle issues related to excessive solid waste management.

Removal of hexavalent chromium and methylene blue in aqueous solutions using activated carbon prepared from rubber seed shell

Chemically activated carbon preparation from natural rubber biosludge for the study of characterization, kinetics and isotherms, thermodynamics, reusability during Cr(VI) and methylene blue adsorption

Comparison of surface adsorption efficacies of eco-sustainable agro/animal biomass-derived activated carbon for the removal of rhodamine B and hexavalent chromium

Efficient Hexavalent Chromium Removal by Nano-Cerium Oxide Functionalized Biochar: Insight into the Role of Reduction

High-Efficiency Adsorption of Hexavalent Chromium from Aqueous Solution by Samanea saman Activated Carbon

Preparation and characterization of Allium cepa extract coated biochar and adsorption performance for hexavalent chromium

Efficient Removal of Hexavalent Chromium (Cr(VI)) from Wastewater Using Amide-Modified Biochar

Adsorption of Hexavalent Chromium Using Activated Carbon Produced from Sargassum ssp.: Comparison between Lab Experiments and Molecular Dynamics Simulations

Optimization of Cr (VI) removal from aqueous solution with activated carbon derived from Eichhornia crassipes under response surface methodology

Modification of Non-Activated Carbon from Rubber Fruit Shells with 3-(Aminopropyl)-Triethoxysilane and Its Adsorption Study on Coomassie Brilliant Blue and Methylene Blue in Solution

Enhanced adsorptive removal of hexavalent chromium in aqueous media using chitosan-modified biochar: Synthesis, sorption mechanism, and reusability

Removal of Cr (III) from wastewater by using raw and chemically modified sawdust and corn husk

Preparation of activated carbon with high nitrogen content from agro-industrial waste for efficient treatment of chromium (VI) in water

Preparation of Modified Biochar and Its Adsorption of Cr(VI) in Aqueous Solution

Preferential, synergistic sorption and reduction of Cr(VI) from chromium–rhodamine B mixed wastewater by magnetic porous biochar derived from wasted Myriophyllum aquaticum biomass

Adsorption performance and kinetics of Cr(VI) onto activated carbons derived from the waste leaves of invasive plants Rhus typhina and Amorpha fruticosa

Removal of hexavalent chromium in aqueous solutions using biochar: Chemical and spectroscopic investigations

Efficient Removal of Cr(VI) from Wastewater by Magnetic Biochar Derived from Peanut Hull

Ultrasound Assisted Removal of Methylene Blue Using Functionalized Mesoporous Biochar Composites

Efficient Cr(III) removal from effluent using functionalized Ficus benghalensis and Bambusa vulgaris bio-adsorbents

Functionalization of carbon from rubber fruit shells (Hevea brasiliensis) with silane agents and its application to the adsorption of bi-component mixtures of methylene blue and crystal violet