Abstract:Abstract The composite wall with encased steel braces (ESB wall) is a novel type of steel–concrete composite wall that consists of a steel braced frame embedded in reinforced concrete. This arrangement is supposed to enhance the seismic performance of the wall, as the steel columns encased in the boundary elements can increase the flexural strength of the wall and the steel braces encased in the web can increase the shear strength. ESB walls have seen use in super tall building structures constructed in regions of high seismicity. The ESB walls are commonly used on stories where the shear force demand is very high. Currently, no design guidelines exist for the design of ESB Walls in the Eurocode. More research is required before a distinct set of guidelines can be prescribed for the design of ESB Walls. The present research will investigate behavior of composite walls with encased steel braces (ESB walls). Time history analysis will be performed to examine the shear strength and stiffness of the ESB walls. In this study, two frames with three floors and five floors will be modeled in ABAQUS software. Then the X- shaped braces and inverted V brace is added to frames. Later, reinforced concrete shear wall will be added to braced frames, so the steel braces encased in the reinforced concrete shear wall. Time history analysis, on the braced frames will be done Compare and note with each other. The results of the study are in good agreement with those of previous studies. However, none of these studies examined the effect of using V- and X-shaped struts and shear walls simultaneously, nor did they examine which struts reinforce the structures more strongly against earthquake vibrations. This has led the study to examine the effect of these reinforcements under various earthquakes. In future studies, reinforced concrete structures can also be used in addition to steel structures, and the results can be compared. In addition, these braces can also be used in other parts of the building. To meet this objective, one can use the very important data provided in this thesis, and ultimately better and more accurate results can be extracted using this approach. The main aim of this thesis is to study the effect of increasing the number of floors on how to extend the stress on the building structure. To this end, the number of floors increased from three to five. Therefore, it can be concluded that an increase in the number of floors also more than 5 storey causes stress values, but these modes are quite consistent with the three- and five-storey buildings.

Study of the Impact Irregular Concrete Facilities with the Shear Walls Based: The Effect of Soil-Structure Interaction with ABAQUS Software

Effect of Ductile Shear Wall Ratio and Cross-Section Configuration on Seismic Behavior of Reinforced Concrete Masonry Shear Wall Buildings

Seismic Response History Analysis of RC Frame Building with Different Position of Shear Walls by using ETABS

Soil-Structure Interaction of High-rise Building Resting on Soft Soil

Study of the Seismic Performance of Composite Shear Walls with Embedded Steel Truss For Use in High-rise Buildings

Determination of Behavior Coefficient of Prefabricated Concrete Frame ith Prefabricated Shear Walls

Non-Linear Behavior of Reinforced Concrete Frame Structure with Vertical Irregularities

Comparative Study of Reinforced Concrete Frame Structure with And Without Shear Wall

Seismic evaluation of BRBF steel structures with L-shaped irregular plan considering soil-structure interaction

Soil–Structure Interaction Effect on Seismic Force Evaluation of RC Framed Buildings with Various Shapes of Shear Wall: As Per IS 1893 and IBC

Analysis and Research on Reinforcement and Reconstruction Method of Adding Shear Wall for Multi-Story Frame Structure

Vertical Geometric Irregularity Effect on Performance-Based Seismic Design for Moderate Rise RC Moment Resisting Frame Buildings

The effects of Steel Plate Shear Wall on Residual Capacity of Reinforced Concrete Frame under Sequence Earthquakes by Incremental Dynamic Analysis

Seismic assessment of irregular RC frames with tall ground story incorporating nonlinear soil–structure interaction

Assessment of the Seismic Performance and the Base Shear Contribution Ratios of the RC Wall-frame Dual System Considering Soil–Structure Interaction

Response analysis of a multi-story building structure with a variety of horizontal irregularities and shear wall geometries

Study Behaviour of Composite Shear Wall with Embeded Columns

Investigation on the Effect of Geometric Parameter on Reinforced Concrete Exterior Shear Wall-Slab Connection Using Finite Element Analysis

Resilience of Medium-to-High-Rise Ductile Coupled Shear Walls Located in Canadian Seismic Zones and Strengthened with Externally Bonded Fiber-Reinforced Polymer Composite: Nonlinear Time History Assessment

Study on Reinforced Concrete Masonry High-Rise Building by Abaqus

Study and Numerical Analysis on Seismic Performance of Concrete U-Shaped Shear Wall