Abstract:In this study, hydrolysis agent-assisted three-dimensional (3D) flowerlike hierarchical zinc–nickel–cobalt oxide (ZNCO) nanostructured materials, which consist of two-dimensional (2D) ZNCO nanosheets anchored with one-dimensional (1D) ZNCO nanowire architectures, as binder-free electrodes for ultrahigh-rate supercapacitor applications are directly fabricated on Ni foam via a facile hydrothermal method followed by calcination. The morphologies of the as-fabricated flowerlike 3D hierarchical ZNCO nanostructures dramatically depend on the combination method (urea, hexamethylenetetramine, hexamethylenetetramine–urea) of the hydrolysis reagents used, which are denoted ZNCO-U, ZNCO-H, and ZNCO-HU, respectively. Among them, the as-prepared ZNCO-HU electrode shows outstanding electrochemical performance with a higher specific capacity of 259.8 mAh g–1 at 1 A g–1, ultrahigh capacitance retention of 83.9% at a higher current density of 50 A g–1, and remarkable long cycle stability over 5000 cycles. The assembled asymmetric supercapacitor (ASC) device using ZNCO-HU as the cathode and N-doped graphene hydrogel (NGH) as the anode materials delivers a noticeable specific capacity of 76.5 mAh g–1 at 1 A g–1 and good rate capability of 69.65% at 10 A g–1. The sandwiched ASC displays a superior energy density of 55.4 Wh kg–1 at a power density of 761.5 W kg–1 and excellent capacity retention of 89% up to 5000 cycles.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.0c01419.EDX spectrum of the ZNCO-HU flowerlike superstructures and elemental mapping of different elements (Figure S1); XRD pattern of the ZNCO-HU precursor before calcination (Figure S2); electrochemical performance for the ZNCO-U electrode, CV curves for ZNCO-U at different scan rates, and GCD curves for the ZNCO-U electrode at different current densities (Figure S3); electrochemical performance for the ZNCO-H electrode, CV curves for ZNCO-H at different scan rates, and GCD curves for the ZNCO-H electrode at different current densities (Figure S4); cyclic performance for the ZNCO flowerlike superstructures prepared using three different reagents at 20 A g–1 (Figure S5); FE-SEM images of ZNCO-HU after consecutive 5000 charge/discharge cycles (Figure S6); FE-SEM images, CV curves, GCD curves, rate performance, and Nyquist plot for the NGH as an anode material (Figure S7); and areal capacitance of the ZNCO-HU electrode at various scan rates from 5 to 200 mV s–1 (Figure S8) (PDF)This article has not yet been cited by other publications.

Promoting the cyclic and rate performance of nickel hydroxide with ZnO via electrodeposition for supercapacitor

Facilely synthesized porous NiCo2O4 flowerlike nanostructure for high-rate supercapacitors

A High-Performance Hybrid Supercapacitor with NiO Derived NiO@Ni-MOF Composite Electrodes

Three-Dimensional Hierarchical Structure ZnO@C@NiO on Carbon Cloth for Asymmetric Supercapacitor with Enhanced Cycle Stability

Hierarchical Structure Electrodes of NiO Ultrathin Nanosheets Anchored to NiCo2O4 on Carbon Cloth with Excellent Cycle Stability for Asymmetric Supercapacitors

Electrodeposition of Zn-doped Α-Nickel Hydroxide with Flower-Like Nanostructure for Supercapacitors

Self-templated flower-like NiCoZn-carbonate hydroxide hollow nanospheres for asymmetric supercapacitors with high performance

Oxygen vacancy-enriched bilayer flower-like structure of ZnO&NiO@C-ZnO nanorod arrays on carbon cloth with improved eletrochemical performance

Highly Dispersive Nickel Vanadium Oxide Nanoparticles Anchored on Nickel Cobalt Phosphate Micron-Sheets As Cathodes for High-Energy Hybrid Supercapacitor Devices

Synthesis of amorphous Nickel-Cobalt hydroxides with high areal capacitance by one-step electrodeposition using polymeric additive

Single-step, in-situ fabrication of flower-like NiCuMn hybrid oxyhydroxide electrodes for enhanced supercapacitor performance

Synergistic effects of CoS-decorated Ni-MOF with hierarchical structures for high-performance supercapacitor electrode materials

Preparation of petal-particle cross-linking flowerlike NiO for supercapacitor application

ZnO/CoO@NiCoS nanohybrids with double heterogeneous interface for high-performance hybrid supercapacitors

Hybrid Electrodes Based on Zn–Ni–Co Ternary Oxide Nanowires and Nanosheets for Ultra-High-Rate Asymmetric Supercapacitors

A novel nickel and cobalt-layered double Hydroxide@Nickel borate with three-dimensional flower-like structure as electrode material for high-performance hybrid supercapacitor

Study of synergistic nanostructures of NiO/ZnO and their composite as high-performance electrodes for supercapacitor

Facile growth of homogeneous Ni(OH)2 coating on carbon nanosheets for high-performance asymmetric supercapacitor applications

High Mass Loading Flower-Like MnO2 on NiCo2O4 Deposited Graphene/nickel Foam As High-Performance Electrodes for Asymmetric Supercapacitors

MOFs assisted construction of Ni@NiOx/C nanosheets with tunable porous structure for high performance supercapacitors

FeMn-LDH/Ni(OH)2 with unique flower-like heterostructure as electrode material for supercapacitor