Abstract:Piezoelectric energy harvesting techniques are increasingly seen as promising power sources for wireless sensor networks that monitor railway infrastructure. However, the piezoelectric generators currently available for railway applications suffer from low power output, as well as inadequate durability and robustness. To tackle these issues, this study introduces a novel, high-power, sturdy piezo stack energy harvester's design, optimization, and testing for powering wireless sensor networks in rail systems. The aim is to improve both the power output and the durability and robustness of the device. The proposed harvester's high-power generation is facilitated by a frequency up-conversion mechanism, mechanical transformer design and optimization, and the application of the piezo stack's compression mode (d 33 mode). The frequency up-conversion mechanism allows the harvester to function at low-frequency track vibrations with high power. The mechanical transformer significantly magnifies the force exerted on the piezo stack. The compression mode boots the energy conversion efficiency due to its higher coupling factor. To enhance durability and robustness, innovative approaches are employed. The mechanical transformer is optimized for maximum energy transmission efficiency without exceeding the material's fatigue limit. Moreover, the piezo stack is designed to operate under pre-compression, preventing tensile stress and taking advantage of the piezoelectric ceramics' remarkable compressive strength. Plate springs are also integrated into the mechanical transformer to maintain motion along the vibration direction. Experimental results from prototype testing provide strong evidence for the high-power output of the proposed harvester and its ability to power a wireless sensor. A maximum power of 511 mW and an average power of 24.5 mW are achieved at a harmonic excitation with 21 Hz and 0.7 RMS (Root Mean Square) g, while a maximum power of 568 mW and an average power of 7.3 mW are generated under a measured railway track vibration signal.

Experimental and theory study on a stacked piezoelectric energy harvester for pressure pulsation in water hydraulic system

Mathematical modeling and parameter optimization of a stacked piezoelectric energy harvester based on water pressure pulsation

Experimental and simulation study of a hydraulic piezoelectric energy harvester under different connection modes

Design, simulation and experiment for a piezoelectric energy harvester based on fluid pressure pulsation in water hydraulic system

Theoretical and Experimental Investigation of a Bi-Stable Piezoelectric Energy Harvester Incorporating Fluid-Induced Vibration

Simulation and Experimental Research on a New Symmetrical Hydraulic Piezoelectric Energy Harvester

Electromechanical Modeling and Experimental Analysis of a Compression-Based Piezoelectric Vibration Energy Harvester

Design and Experimental Investigation of a Novel Piezoelectric Energy Harvester in Pneumatic System

Theoretical and Experimental Studies of a Piezoelectric Ring Energy Harvester

Hydrokinetic piezoelectric energy harvesting by wake induced vibration

Design and test of liquid sloshing piezoelectric energy harvester

Experimental and simulation of a tension-like nonlinear piezoelectric energy harvester

Dynamic modeling and experimental validation of a low frequency piezoelectric vibration energy harvester via secondary excitation of pressured fluid

Development of a Nonlinear Piezoelectric Energy Harvester for Alternating Air Load

Modeling of Piezoelectric Energy Harvesting from Freely Oscillating Cylinders in Water Flow

Multi-pillar piezoelectric stack harvests ocean wave energy with oscillating float buoy

Modeling and Experimental Study of a Piezoelectric Energy Harvester from Vortex Shedding-Induced Vibration

Design, modeling and experiments of bistable piezoelectric energy harvester with self-decreasing potential energy barrier effect

Designed Simulation and Experiment of a Piezoelectric Energy Harvesting System Based on Vortex-Induced Vibration

Piezoelectric Harvesting of Fluid Kinetic Energy Based on Flow-Induced Oscillation

A high-power, robust piezoelectric energy harvester for wireless sensor networks in railway applications