Abstract:This paper presents a thorough investigation of the correlation governing the energy deposition in PWR coolant, resulting from coupled neutron-photon transport. The study examines the effects of varying pitch size, fuel enrichment, and the presence of neutron absorbers in the fuel pellet on coolant heating. First, the correlation is checked against Monte Carlo simulations of a UO 2 fresh-fuel pin cell with different pitch sizes, and significant discrepancies are observed. These discrepancies are addressed by applying a correction factor based on the proportional relation between the reaction rate (involving both photons and neutrons) and the moderator mass. The correction successfully resolves the discrepancies, yielding relative gaps of less than 1% between the correlation and the simulations. The validity of this correction is demonstrated for both square and hexagonal cell configurations. The subsequent section investigates the effects of varying fuel enrichment and the presence of xenon and gadolinium absorbers in UO 2 pins. A gadolinium-poisoned fuel element is simulated in a 3 × 3 arrangement, with the poisoned pin positioned at the center, to simulate the proper spectrum around the gadolinium pin. Furthermore, the correlation is validated in fuel assembly design from the VERA benchmark problems 2B, 2O, and 2P. In problem 2B, the presence of water-filled guide tube cells leads to an increase in the mass of the moderator, which is taken into account by applying a correction factor in the correlation. In problems 2O and 2P, the combined influence of guide tubes and gadolinium pins on the energy deposition in the coolant is examined. Across all the case studies, the differences between the simulation data and the predictions from the correlation are minimal. Throughout the investigation, the study characterizes and analyzes the impacts of changes in design parameters on the energy spectrum, few-group homogenized cross sections, and reaction rates on coolant heating. This research provides a deeper understanding of the physical processes involved in radiation energy deposition in the coolant and offers valuable insights for future analyses utilizing the proposed correlation.

Analysis of the correlation for energy deposition in PWR coolant by coupled neutron-photon transport calculations

Study of energy deposition in the coolant of LFR

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Numerical study on surface corrosion deposition of fuel elements and its influence on flow heat transfer

Development and Verification of PWR Core Transient Coupling Calculation Software

New RMC Energy Deposition Treatment and its Application in Multi-Physics Simulation

The Development and Assessment of a New CHF Correlation for PWR Fuel Assemblies

Core Design Study on CANDU-SCWR with 3D Neutronics/thermal-Hydraulics Coupling

An Enhanced Correlation for Gas-Particle Heat and Mass Transfer in Packed and Fluidized Bed Reactors

Coupled neutronics/thermal–hydraulics analysis of CANDU–SCWR fuel channel

A Coupled Deterministic and Monte-Carlo Method for Modeling and Simulation of Self-Powered Neutron Detector

Pressurized Water Reactor Fuel Corrosion-Related Unidentified Deposit and Its Related Safety Issues – III. N-TH-M Coupled CIPS Prediction

Monte Carlo Perturbation Analysis of Fuel Temperature Variations in the MCNP Model of the Annular Core Research Reactor

Study on coupling effect of CRUD growth and heat transfer on fuel rod

Neutronic analysis of european sodium-cooled fast reactor using Monte Carlo

Preliminary Study of Parameter Uncertainty Influence on Pressurized Water Reactor Core Design

Three-Dimensional Fine-Mesh Coupled Neutronics and Thermal-Hydraulics Calculation for PWR Fuel Pins

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

Coupled Neutronics and Thermal–Hydraulics Analysis of Annular Fuel Assembly for SCWR

Assessment of heat transfer correlations in the sub-channels of proposed rod bundle geometry for supercritical water reactor

A Correlation Of Heat Transfer Non-Uniformity In Rod Bundle And Its Application To Sub-Channel Code