Abstract:Plantar shear stress may have an important role in the formation of a Diabetic Foot Ulcer, but its measurement is regarded as challenging and has limited research. This paper highlights the importance of anatomical specific shear sensor calibration and presents a feasibility study of a novel shear sensing system which has measured in-shoe shear stress from gait activity on both healthy and diabetic subjects. The sensing insole was based on a strain gauge array embedded in a silicone insole backed with a commercial normal pressure sensor. Sensor calibration factors were investigated using a custom mechanical test rig with indenter to exert both normal and shear forces. Indenter size and location were varied to investigate the importance of both loading area and position on measurement accuracy. The sensing insole, coupled with the calibration procedure, was tested one participant with diabetes and one healthy participant during two sessions of 15 minutes of treadmill walking. Calibration with different indenter areas (from 78.5 mm 2 to 707 mm 2 ) and different positions (up to 40 mm from sensor centre) showed variation in measurements of up to 80% and 90% respectively. Shear sensing results demonstrated high repeatability (>97%) and good accuracy (mean absolute error < ±18 kPa) in bench top mechanical tests and less than 21% variability within walking of 15-minutes duration. The results indicate the importance of mechanical coupling between embedded shear sensors and insole materials. It also highlights the importance of using an appropriate calibration method to ensure accurate shear stress measurement. The novel shear stress measurement system presented in this paper, demonstrates a viable method to measure accurate and repeatable in-shoe shear stress using the calibration procedure described. The validation and calibration methods outlined in this paper could be utilised as a standardised approach for the research community to develop and validate similar measurement technologies.

Design and Implementation of a Complete Wearable Smart Insole Solution to Measure Plantar Pressure and Temperature

Design and Implementation of a Smart Insole System to Measure Plantar Pressure and Temperature

Design, Implementation, and Performance Evaluation of a Fiber Bragg Gratings(FBG) based Smart Insole to Measure Plantar Pressure and Temperature

Insole-Based Systems for Health Monitoring: Current Solutions and Research Challenges

Development of Plantar Pressure Distribution Measurement Shoe Insole with Built-in Printed Curved Sensor Structure

Textile-film sensors for a comfortable intelligent pressure-sensing insole

A Wearable Insole System to Measure Plantar Pressure and Shear for People with Diabetes

Fabric-Based Insoles With Self-Equipped Sensors for the Foot's Physiological Signal Monitoring

Diabot: Development of a Diabetic Foot Pressure Tracking Device

Smart Insoles for Gait Analysis Based on Meshless Conductive Rubber Sensors and Neural Networks

Design and manufacturing a smart shoe for diabetic foot ulcer monitoring and prediction system using internet-of-things technology

SoleMate: The Design and Development of a Smart Insole System

Deep-learning enabled smart insole system aiming for multifunctional foot-healthcare applications

Design of a Plantar Pressure Insole Measuring System Based on Modular Photoelectric Pressure Sensor Unit

Self ‐Powered Insole Plantar Pressure Mapping System

Flexible sensor matrix film-based wearable plantar pressure force measurement and analysis system

Real-time pressure mapping smart insole system based on a controllable vertical pore dielectric layer

Smart Insole: A Wearable Sensor Device for Unobtrusive Gait Monitoring in Daily Life

Non Disturbance Gait Signal Acquisition Insole for Daily Monitoring

Integrated Fibrous Iontronic Pressure Sensors with High Sensitivity and Reliability for Human Plantar Pressure and Gait Analysis

In-shoe plantar shear stress sensor design, calibration and evaluation for the diabetic foot