Building ordered nanoparticle assemblies inspired by atomic epitaxy

Jiaming Liu,Jingjing Wei,Zhijie Yang

DOI: https://doi.org/10.1039/d1cp02373j

IF: 3.3

2021-01-01

Physical Chemistry Chemical Physics

Abstract:This Perspective reviews recent advances in ordered nanoparticle assemblies that are produced on selected substrates, akin to the atomic epitaxy.

chemistry, physical,physics, atomic, molecular & chemical

What problem does this paper attempt to address?

Nanoparticle Superlattices with Nonequilibrium Crystal Shapes

Matthew Ye,Theodore Hueckel,Perapat P. Gatenil,Keisuke Nagao,W. Craig Carter,Robert J. Macfarlane

DOI: https://doi.org/10.1021/acsnano.4c04192

IF: 17.1

2024-06-07

ACS Nano

Abstract:Nanoparticle assembly is a material synthesis strategy that enables precise control of nanoscale structural features. Concepts from traditional crystal growth research have been tremendously useful in predicting and programming the unit cell symmetries of these assemblies, as their thermodynamically favored structures are often identical to atomic crystal analogues. However, these analogies have not yielded similar levels of influence in programming crystallite shapes, which are a consequence of...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Lattice Engineering Through Nanoparticle–dna Frameworks

Ye Tian,Yugang Zhang,Tong Wang,Huolin L. Xin,Huilin Li,Oleg Gang

DOI: https://doi.org/10.1038/nmat4571

IF: 41.2

2016-01-01

Nature Materials

Abstract:Advances in self-assembly over the past decade have demonstrated that nano- and microscale particles can be organized into a large diversity of ordered three-dimensional (3D) lattices. However, the ability to generate different desired lattice types from the same set of particles remains challenging. Here, we show that nanoparticles can be assembled into crystalline and open 3D frameworks by connecting them through designed DNA-based polyhedral frames. The geometrical shapes of the frames, combined with the DNA-assisted binding properties of their vertices, facilitate the well-defined topological connections between particles in accordance with frame geometry. With this strategy, different crystallographic lattices using the same particles can be assembled by introduction of the corresponding DNA polyhedral frames. This approach should facilitate the rational assembly of nanoscale lattices through the design of the unit cell.
Two-Stage Assembly of Nanoparticle Superlattices with Multiscale Organization

Yuxiang Dong,Jiliang Liu,Xuanzhao Lu,Jialin Duan,Liqi Zhou,Lizhi Dai,Min Ji,Ningning Ma,Yong Wang,Peng Wang,Jun-Jie Zhu,Qianhao Min,Oleg Gang,Ye Tian

DOI: https://doi.org/10.1021/acs.nanolett.2c00942

IF: 10.8

2022-04-25

Nano Letters

Abstract:Self-assembly processes, while promising for enabling the fabrication of complexly organized nanomaterials from nanoparticles, are often limited in creating structures with multiscale order. These limitations are due to difficulties in practically realizing the assembly processes required to achieve such complex organizations. For a long time, a hierarchical assembly attracted interest as a potentially powerful approach. However, due to the experimental limitations, intermediate-level structures are often heterogeneous in composition and structure, which significantly impacts the formation of large-scale organizations. Here, we introduce a two-stage assembly strategy: DNA origami frames scaffold a coordination of nanoparticles into designed 3D nanoclusters, and then these clusters are assembled into ordered lattices whose types are determined by the clusters' valence. Through modulating the nanocluster architectures and intercluster bindings, we demonstrate the successful formation of complexly organized nanoparticle crystals. The presented two-stage assembly method provides a powerful fabrication strategy for creating nanoparticle superlattices with prescribed unit cells.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Nanoparticle self-assemblies with modern complexity

Qian Chen,Xin Zhang

DOI: https://doi.org/10.1557/s43577-024-00700-1

IF: 5

2024-04-11

MRS Bulletin

Abstract:Thanks to decades of tireless efforts, nanoparticle assemblies have reached an extremely high level of controllability, sophistication, and complexity, with new insights provided by integration with graph theory, cutting-edge characterization, and machine learning (ML)-based computation and modeling, as well as with ever-diversifying applications in energy, catalysis, biomedicine, optics, electronics, magnetics, organic biosynthesis, and quantum technology. Nanoparticle assemblies can be crystalline, known as superlattices or supracrystals. Their assembly entails a transition from disorder—dispersed nanoparticles—to order, which can be achieved through classical nucleation pathways or nonclassical pathways via prenucleation precursors or particle aggregation. The periodic lattices allow facile manipulations of electrons, phonons, photons, and even spins, leading to advanced device components and metamaterials. Meanwhile, aperiodic assemblies out of nanoparticles, such as gels, networks, and amorphous solids, also start to attract attention. Despite the loss of periodicity, symmetry-lowering or symmetry-breaking three-dimensional (3D) structures emerge with unique properties, such as chiroptical activity, topological mechanical strength, and quantum entanglement. Real-space imaging such as electron microscopy and x-ray-based tomography methods are utilized to characterize these complex structures, whereas mathematical tools such as graph theories are in need to describe such complex structures. This issue aims to provide a timely review of the efforts in this greatly broadened materials design space, including experiment, simulation, theory, and applications. Nine top experts (and their teams) from four countries deliver six articles summarizing fundamental mechanistic understandings of nanoparticle assemblies, highlighted with the developments of state-of-the-art in situ characterization tools and ML-assisted reverse engineering, and newly emergent applications of nanoarchitectures.

materials science, multidisciplinary,physics, applied
Nanoparticle Assembly as a Materials Development Tool.

Margaret S. Lee,Matthew Ye,R. Macfarlane,Daryl W. Yee

DOI: https://doi.org/10.1021/jacs.1c12335

IF: 15

2022-02-16

Journal of the American Chemical Society

Abstract:Nanoparticle assembly is a complex and versatile method of generating new materials, capable of using thousands of different combinations of particle size, shape, composition, and ligand chemistry to generate a library of unique structures. Here, a history of particle self-assembly as a strategy for materials discovery is presented, focusing on key advances in both synthesis and measurement of emergent properties to describe the current state of the field. Several key challenges for further advancement of nanoparticle assembly are also outlined, establishing a roadmap of critical research areas to enable the next generation of nanoparticle-based materials synthesis.

Medicine,Materials Science
Nanoparticle Assembly: from Self-Organization to Controlled Micropatterning for Enhanced Functionalities.

Sayli Jambhulkar,Dharneedar Ravichandran,Yuxiang Zhu,Varunkumar Thippanna,Arunachalam Ramanathan,Dhanush Patil,Nathan Fonseca,Sri Vaishnavi Thummalapalli,Barath Sundaravadivelan,Allen Sun,Weiheng Xu,Sui Yang,Arunachala Mada Kannan,Yuval Golan,Jessica Lancaster,Lei Chen,Erina B Joyee,Kenan Song

DOI: https://doi.org/10.1002/smll.202306394

2023-01-01

Abstract:Nanoparticles form long-range micropatterns via self-assembly or directed self-assembly with superior mechanical, electrical, optical, magnetic, chemical, and other functional properties for broad applications, such as structural supports, thermal exchangers, optoelectronics, microelectronics, and robotics. The precisely defined particle assembly at the nanoscale with simultaneously scalable patterning at the microscale is indispensable for enabling functionality and improving the performance of devices. This article provides a comprehensive review of nanoparticle assembly formed primarily via the balance of forces at the nanoscale (e.g., van der Waals, colloidal, capillary, convection, and chemical forces) and nanoparticle-template interactions (e.g., physical confinement, chemical functionalization, additive layer-upon-layer). The review commences with a general overview of nanoparticle self-assembly, with the state-of-the-art literature review and motivation. It subsequently reviews the recent progress in nanoparticle assembly without the presence of surface templates. Manufacturing techniques for surface template fabrication and their influence on nanoparticle assembly efficiency and effectiveness are then explored. The primary focus is the spatial organization and orientational preference of nanoparticles on non-templated and pre-templated surfaces in a controlled manner. Moreover, the article discusses broad applications of micropatterned surfaces, encompassing various fields. Finally, the review concludes with a summary of manufacturing methods, their limitations, and future trends in nanoparticle assembly.
Asymmetric Modification and Controlled Assembly of Nanoparticles

Zheng Liyao,Zhou Mi,Yan Qiang,Yuan Jinying

2009-01-01

Progress in chemistry

Abstract:Controlling the assembly of nanobuilding blocks is one of the key issues to develop nanomaterials and nanodevices. A series of methods which aimed at the asymmetric modification of nanoparticles are developed recently, providing a novel and efficient strategy towards controlled assembly of nanoparticles. These methods can modify isotropic nanoparticles to be anisotropic, thus the desired nanobuilding blocks can be prepared from ordinary functional nanoparticles. This review aims at combining the recent scientific literatures to introduce and summarize the approaches of asymmetric modification of nanoparticles,as well as the controlled assembly based on them. Furthermore, the problems those still should be resolved are pointed out, and the direction of this research field is discussed. The prospect of the application is also expected.
Nanoparticle Assembly and Oriented Attachment: Correlating Controlling Factors to the Resulting Structures

Dongsheng Li,Qian Chen,Jaehun Chun,Kristen Fichthorn,James De Yoreo,Haimei Zheng

DOI: https://doi.org/10.1021/acs.chemrev.2c00700

IF: 62.1

2023-02-23

Chemical Reviews

Abstract:Nanoparticle assembly and attachment are common pathways of crystal growth by which particles organize into larger scale materials with hierarchical structure and long-range order. In particular, oriented attachment (OA), which is a special type of particle assembly, has attracted great attention in recent years because of the wide range of material structures that result from this process, such as one-dimensional (1D) nanowires, two-dimensional (2D) sheets, three-dimensional (3D) branched...

chemistry, multidisciplinary
Multiscale Nanoparticle Assembly: From Particulate Precise Manufacturing to Colloidal Processing

Markus Niederberger

DOI: https://doi.org/10.1002/adfm.201703647

IF: 19

2017-10-20

Advanced Functional Materials

Abstract:Abstract Nanoparticle assembly and colloidal processing are two techniques with the goal to fabricate materials and devices from preformed particles. While colloidal processing has become an integral part of ceramic processing, nanoparticle assembly is still mainly limited to academic interests. It typically starts with the precise synthesis of building blocks, which are generally not only considerably smaller than those used for colloidal processing, but also better defined in terms of size, shape, and size distribution. Their arrangement into 1D, 2D, and 3D architectures is performed with great accuracy well beyond what is achieved by colloidal processing. At the same time, the final assembly is not sintered such that the intrinsic, nanospecific properties of the initial building blocks are preserved or even lead to collective behavior. However, in contrast to colloidal processing the structures accessible by nanoparticle assembly are often limited to a small length scale. The review presents selected examples of nanoparticle assembly and colloidal processing with the goal to reveal the capabilities of these two techniques to fabricate novel materials from preformed building blocks, and also to demonstrate the immense opportunities that would arise if the two methods could be combined with each other.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Self-organized architectures from assorted DNA-framed nanoparticles

Wenyan Liu,Jonathan Halverson,Ye Tian,Alexei V. Tkachenko,Oleg Gang

DOI: https://doi.org/10.1038/NCHEM.2540

IF: 24.274

2016-01-01

Nature Chemistry

Abstract:The science of self-assembly has undergone a radical shift from asking questions about why individual components self-organize into ordered structures, to manipulating the resultant order. However, the quest for far-reaching nanomanufacturing requires addressing an even more challenging question: how to form nanoparticle (NP) structures with designed architectures without explicitly prescribing particle positions. Here we report an assembly concept in which building instructions are embedded into NPs via DNA frames. The integration of NPs and DNA origami frames enables the fabrication of NPs with designed anisotropic and selective interactions. Using a pre-defined set of different DNA-framed NPs, we show it is possible to design diverse planar architectures, which include periodic structures and shaped meso-objects that spontaneously emerge on mixing of the different topological types of NP. Even objects of non-trivial shapes, such as a nanoscale model of Leonardo da Vinci's Vitruvian Man , can be self-assembled successfully.
Diversified Nanoparticle Assembly Pathways: Materials Architecture Control Beyond the Amphiphilicity Paradigm.

Xin Shu,Zhiqiang Lu,Guangzhao Li,Yuan Tian,Sijing Xia,Xin Zhou,Bin Yang,Heng Shen,Baoqing Liu,Jin Zhu

DOI: https://doi.org/10.1021/jp2104159

IF: 3.466

2011-01-01

The Journal of Physical Chemistry B

Abstract:The functional versatility of a chemical system is ultimately dictated by the availability of distinctly accessible architectures. The generation of a diverse array of assembled constructs from a single type of nanoscale building block is a promising yet largely elusive goal. We report herein the utility of a monolayer-modified nanoparticle for the creation of a broad range of architectures. The versatile modes of assembly complement the conventionally used, amphiphilicity-driven strategy. We demonstrate that one can vary the nanoparticle assembly pathways within the confines of solvent media through the modulation of interactions and partitioning of nanoparticles. Merging of the molecular-scale design and higher-ordered arrangement enables diversified assembly through the manipulation of experimental parameters such as solvent, pH, affinity molecule, and temperature. Microfluidics provides an effective channel to control the monodispersity and size on all the architectures attainable in the bulk solution phase. These observations could be further explored for an understanding of diversified matter organization and order generation beyond the amphiphilicity paradigm.
Super-assembly platform for diverse nanoparticles with tunable topological architectures and surface morphologies

Mengyao He,Jifu Yang,Kejun Qiu,Yue Wu,Yangyi Sun,Dongming Qi

DOI: https://doi.org/10.1016/j.jcis.2023.08.020

IF: 9.9

2023-08-13

Journal of Colloid and Interface Science

Abstract:Self-assembly leveraged by nature enables the sophisticated generation of a wide range of nanoparticles (NPs) with rich architectures and morphologies. However, existing artificial self-assembly platforms largely only allow for the fabrication of single type of NPs with limited structures, due to their inability to define interfacial interaction between seeds and growth materials, which is critically important to gain controllable growth patterns of the grown materials on the seeds' surface. Here, we report a versatile super-assembly platform that shows the capabilities to fabricate diverse NPs with tunable topological architectures and surface morphologies, e.g., molecular-like NPs, hollow asymmetric NPs, patchy NPs, etc. We unprecedentedly discovered the powerful functions of polyvinylpyrrolidone (PVP), which enable us to well define interfacial interaction between growth materials and seeds to achieve the controllable and tunable generation of various complex topological growth patterns. Moreover, the nucleation pattern (island nucleation or layered nucleation) of the patches can be thermodynamically modulated via the polarity of the solvent, while the number and size of the patches can be kinetically tuned by the ratio of polystyrene (PS), precursor, and catalyst. Interestingly, the hollow NPs can be generated by single-one processing step in our platform, unlike the multiple steps laboriously and widely employed by previously reported fabrication platforms. In addition, we demonstrate that our annealed NPs can not only selectively reflect visible light, and show well-controlled colors from gray, blue, to green, but also exhibit excellent photothermal conversion performances with a high photothermal conversion efficiency of 68.7% that are superior to currently routinely reported of 40%. This super-assembly platform can serve as a powerful toolset to sophisticatedly create varied NPs with tunable hierarchical architectures and controllable surface morphologies, which would significantly benefit the development of drug delivery, nanomaterial assembly, nano pigments, nanoreactors, and beyond.

chemistry, physical
Epitaxial growth of hybrid nanostructures

Chaoliang Tan,Junze Chen,Xue-Jun Wu,Hua Zhang

DOI: https://doi.org/10.1038/natrevmats.2017.89

IF: 83.5

2018-01-01

Nature Reviews Materials

Abstract:Hybrid nanostructures are a class of materials that are typically composed of two or more different components, in which each component has at least one dimension on the nanoscale. The rational design and controlled synthesis of hybrid nanostructures are of great importance in enabling the fine tuning of their properties and functions. Epitaxial growth is a promising approach to the controlled synthesis of hybrid nanostructures with desired structures, crystal phases, exposed facets and/or interfaces. This Review provides a critical summary of the state of the art in the field of epitaxial growth of hybrid nanostructures. We discuss the historical development, architectures and compositions, epitaxy methods, characterization techniques and advantages of epitaxial hybrid nanostructures. Finally, we provide insight into future research directions in this area, which include the epitaxial growth of hybrid nanostructures from a wider range of materials, the study of the underlying mechanism and determining the role of epitaxial growth in influencing the properties and application performance of hybrid nanostructures.
Electric, magnetic, and shear field-directed assembly of inorganic nanoparticles

Huayang Wang,Hao Li,Pan Gu,Caili Huang,Senbin Chen,Chenglong Hu,Eunji Lee,Jiangping Xu,Jintao Zhu

DOI: https://doi.org/10.1039/d2nr05821a

IF: 6.7

2023-01-04

Nanoscale

Abstract:Ordered assemblies of inorganic nanoparticles (NPs) have shown tremendous potential for wide applications due to their unique collective properties, which differ from those of individual NPs. Various assembly methods, such as external field-directed assembly, interfacial assembly, template assembly, biomolecular recognition-mediated assembly, confined assembly, and others, have been employed to generate ordered inorganic NPs assemblies with hierarchical structures. Among them, the external field-directed assembly method is particularly fascinating, as it can remotely assemble NPs into well-ordered superstructures. Moreover, the external fields (e.g., electric, magnetic, and shear fields) can introduce local and/or global field intensity gradient, resulting in an additional force on NPs to drive their rotation and/or translation. Therefore, the external field-directed assembly of NPs becomes a robust method to fabricate well-defined functional materials with desired optical, electronic, and magnetic properties, which have various applications in catalysis, sensing, disease diagnosis, energy conversion/storage, photonics, nano-floating-gate memory, and others. In this review, the effects of electric field, magnetic field, and shear field on the organization of inorganic NPs are highlighted. The methods for controlling the well-ordered organization of inorganic NPs at different scales and their advantages are reviewed. Finally, future challenges and perspectives in this field are discussed.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Step-Growth Polymerization of Inorganic Nanoparticles

Kun Liu,Zhihong Nie,Nana Zhao,Wei Li,Michael Rubinstein,Eugenia Kumacheva

DOI: https://doi.org/10.1126/science.1189457

2010-01-01

Abstract:Self-organization of nanoparticles is an efficient strategy for producing nanostructures with complex, hierarchical architectures. The past decade has witnessed great progress in nanoparticle self-assembly, yet the quantitative prediction of the architecture of nanoparticle ensembles and of the kinetics of their formation remains a challenge. We report on the marked similarity between the self-assembly of metal nanoparticles and reaction-controlled step-growth polymerization. The nanoparticles act as multifunctional monomer units, which form reversible, noncovalent bonds at specific bond angles and organize themselves into a colloidal polymer. We show that the kinetics and statistics of step-growth polymerization enable a quantitative prediction of the architecture of linear, branched, and cyclic self-assembled nanostructures; their aggregation numbers and size distribution; and the formation of structural isomers.
Hierarchical Assembly of Plasmonic Nanoparticle Heterodimer Arrays with Tunable Sub-5 nm Nanogaps.

Jiajing Li,Tian-Song Deng,Xiaoying Liu,James A Dolan,Norbert F Scherer,Paul F Nealey

DOI: https://doi.org/10.1021/acs.nanolett.9b00792

IF: 10.8

2019-01-01

Nano Letters

Abstract:Nanoparticle assemblies have generated intense interest because of their novel optical, electronic, and magnetic properties that open up numerous opportunities in fundamental and applied nanophotonics, -electronics, and -magnetics. However, despite the great scientific and technological potential of these structures, it remains an outstanding challenge to reliably fabricate such assemblies with both nanometer-level structural control and precise spatial arrangements on a macroscopic scale. It is the combination of these two features that is key to realizing nanoparticle assemblies potential, particular for device applications. To address this challenge, we propose a hierarchical assembly approach consisting of both template-particle and particle-particle interactions, whereby the former ensures precise addressability of assemblies on a surface and the latter provides nanometer-level structural control. Template-particle interactions are harnessed via chemical-pattern-directed assembly, and the particle-particle interactions are controlled using DNA-directed self-assembly. To demonstrate the potential of this hierarchical assembly approach, we demonstrate the fabrication of a particularly fascinating assembly: the nanoparticle heterodimer, which possesses a surprisingly rich set of plasmonic properties and is a promising candidate to enable a variety of imaging and sensing applications. Each heterodimer is placed on the surface at predetermined locations, and the precise control of the nanogaps is confirmed by far-field scattering measurements of individual dimers. We further demonstrate that the gap size can be effectively tuned by varying the DNA length. By correlating measured spectra with finite-difference time-domain (FDTD) simulations, we determine the gap sizes to be 4.2 and 5.0 nm-with subnm deviation-for the two DNA lengths investigated. This is one of the best gap uniformities ever demonstrated for surface-bound nanoparticle assemblies. The estimated surface-enhanced Raman scattering (SERS) enhancement factor of these heterodimers is on the order of 10(5)-10(6) with high reproducibility and predictable polarization-dependence. This hierarchical fabrication technique-employing both template-particle and particle-particle interactions-constitutes a novel platform for the realization of functional nanoparticle assemblies on surfaces and thereby creates new opportunities to implement these structures in a variety of applications.
DNA-Grafted 3D Superlattice Self-Assembly

Shuang Wang,Xiaolin Xie,Zhi Chen,Ningning Ma,Xue Zhang,Kai Li,Chao Teng,Yonggang Ke,Ye Tian

DOI: https://doi.org/10.3390/ijms22147558

IF: 5.6

2021-07-15

International Journal of Molecular Sciences

Abstract:The exploitation of new methods to control material structure has historically been dominating the material science. The bottom-up self-assembly strategy by taking atom/molecule/ensembles in nanoscale as building blocks and crystallization as a driving force bring hope for material fabrication. DNA-grafted nanoparticle has emerged as a “programmable atom equivalent” and was employed for the assembly of hierarchically ordered three-dimensional superlattice with novel properties and studying the unknown assembly mechanism due to its programmability and versatility in the binding capabilities. In this review, we highlight the assembly strategies and rules of DNA-grafted three-dimensional superlattice, dynamic assembly by different driving factors, and discuss their future applications.

biochemistry & molecular biology,chemistry, multidisciplinary
Catalyzed Growth for Atomic-Precision Colloidal Chalcogenide Nanowires and Heterostructures: Progress and Perspective.

Yi Li,Zhen-Chao Shao,Chong Zhang,Shu-Hong Yu

DOI: https://doi.org/10.1021/acs.jpclett.1c02358

2021-01-01

Abstract:One-dimensional colloidal semiconductor nanowires are of wide interest in nanoscale electronics and photonics. As compared to the zero-dimensional counterparts, their geometrical anisotropy offers an additional degree of freedom to tailor the electronic and optical properties and enables customized heterostructures with increased complexity. The colloidal synthetic chemistry developed over past decades has fueled the emergence of diverse one-dimensional nanocrystals and heterostructures, whereas the synthetic pursuit for compositionally and structurally defining them at the atomic-level precision remains yet a giant challenge. Catalyzed growth, wherein nanowires grow at the catalyst-nanowire interfaces in a layer-by-layer manner, offers a promising path toward such an ultimate goal. In this Perspective, we will take a close look at how catalyzed growth would enable the on-demand, atomic-precision control of colloidal nanowires and their heterostructures. We then further highlight their potentials for constructing higher-order heteroarchitectures with new and/or enhanced performances. Finally, we conclude with a forward-looking perspective on future challenges.
Nanoparticles: A General Strategy for Assembling Nanoparticles in One Dimension (adv. Mater. 16/2014)

Bin Su,Cong Zhang,Shuoran Chen,Xingye Zhang,Linfeng Chen,Yuchen Wu,Yiwen Nie,Xiaonan Kan,Yanlin Song,Lei Jiang

DOI: https://doi.org/10.1002/adma.201470106

IF: 29.4

2014-01-01

Advanced Materials

Abstract:By using a sandwich-shaped assembly system, a wide variety of nanoparticles (e.g., metal, metal oxide, semiconductor, and organic materials) can be aligned towards one direction upon diverse substrates (including industrial silicon wafers or transparent glass plates) at a large scale (up to 10 cm × 10 cm). Taking silver nanoparticles as an example, on page 2501, Y. L. Song and co-workers demonstrate that well-defined nanoparticle circuits with controllable orientation and position can be generated by a designed pillar arrangement, allowing tunable plasmonic waveguiding properties.
In Situ Domain-Confined Epitaxial Regrowth of Individual Nanoparticle: Implications for Nanofabrication

Luping Tang,Yangyang Zhang,Chen Liao,Longbing He,Xing Wu,Tao Xu,Kuibo Yin,Yiwei Liu,Litao Sun

DOI: https://doi.org/10.1021/acsanm.2c04164

IF: 6.14

2022-12-07

ACS Applied Nano Materials

Abstract:Electron beam irradiation has become a powerful tool for designing material structures and studying nanostructure growth down to the individual nanoparticle (NP) level; the method has important fundamental research implications and potential technological applications. However, controlling NP growth under high-energy bombardment is challenging owing to the rapid and unconstrained evolution of NPs during nanofabrication. Herein, a real-time in situ study of epitaxial regrowth of partially sublimated NPs was performed using an FEI Titan 80–300 transmission electron microscope operated at 300 kV. Hybrid NPs containing Ag, Cu, and CuAg with particle sizes of 2–20 nm were obtained via electron beam irradiation of large (35 nm) CuAg NPs at 500 °C. NPs sublimed with increased temperature. Interestingly, domain-confined layer-by-layer epitaxial regrowth on the Ag{111} and {100} facets was observed for partially sublimated NPs. The newly grown part was mostly Ag, as determined using energy-dispersive X-ray spectroscopy. Electron beam irradiation was a key activator for epitaxial regrowth. This study provides real-time regrowth dynamics information at an atomic level, providing new insights into nanostructure growth control in gaseous environments, finding promising applications in nanofabrication.

materials science, multidisciplinary,nanoscience & nanotechnology

Building ordered nanoparticle assemblies inspired by atomic epitaxy

Nanoparticle Superlattices with Nonequilibrium Crystal Shapes

Lattice Engineering Through Nanoparticle–dna Frameworks

Two-Stage Assembly of Nanoparticle Superlattices with Multiscale Organization

Nanoparticle self-assemblies with modern complexity

Nanoparticle Assembly as a Materials Development Tool.

Nanoparticle Assembly: from Self-Organization to Controlled Micropatterning for Enhanced Functionalities.

Asymmetric Modification and Controlled Assembly of Nanoparticles

Nanoparticle Assembly and Oriented Attachment: Correlating Controlling Factors to the Resulting Structures

Multiscale Nanoparticle Assembly: From Particulate Precise Manufacturing to Colloidal Processing

Self-organized architectures from assorted DNA-framed nanoparticles

Diversified Nanoparticle Assembly Pathways: Materials Architecture Control Beyond the Amphiphilicity Paradigm.

Super-assembly platform for diverse nanoparticles with tunable topological architectures and surface morphologies

Epitaxial growth of hybrid nanostructures

Electric, magnetic, and shear field-directed assembly of inorganic nanoparticles

Step-Growth Polymerization of Inorganic Nanoparticles

Hierarchical Assembly of Plasmonic Nanoparticle Heterodimer Arrays with Tunable Sub-5 nm Nanogaps.

DNA-Grafted 3D Superlattice Self-Assembly

Catalyzed Growth for Atomic-Precision Colloidal Chalcogenide Nanowires and Heterostructures: Progress and Perspective.

Nanoparticles: A General Strategy for Assembling Nanoparticles in One Dimension (adv. Mater. 16/2014)

In Situ Domain-Confined Epitaxial Regrowth of Individual Nanoparticle: Implications for Nanofabrication