Abstract:The ever-increasing silicon photovoltaics industry produces a huge annual production of silicon waste (2.03 × 105 tons in 2019), while lignin is one of the main waste materials in the traditional paper industry (7.0 × 107 tons annually), which lead to not only enormous wastage of resources but also serious environment pollution. Lithium-ion batteries (LIBs) are the dominating power sources for portable electronics and electric vehicles. Silicon (Si)-based material is the most promising anode choice for the next-generation high-energy-density LIBs due to its much higher capacity than the commercial graphite anode. Here, we proposed the use of these silicon and lignin waste as sustainable raw materials to fabricate high-capacity silicon/carbon (Si/C) anode materials for LIBs via a facile coprecipitation method utilizing electrostatic attracting force, followed by a thermal annealing process. The as-achieved Si/C composite featured an advanced material structure with micrometer-sized secondary particles and Si nanoparticles embedded in the carbon matrix, which could tackle the inherent challenges of Si materials, including low conductivity and large volume change during the lithiation/delithiation processes. As expected, the obtained Si/C composite displayed an initial charge capacity of 1016.8 mAh g–1, which was 3 times that of a commercial graphite anode in the state-of-the-art LIBs, as well as a high capacity retention of 74.5% at 0.2 A g–1 after 100 cycles. In addition, this Si/C composite delivered superior rate capability with a high capacity of 575.9 mAh g–1 at 2 A g–1, 63.4% of the capacity at 0.2 A g–1. The utilization of industrial Si and lignin waste provides a sustainable route for the fabrication of advanced high-capacity anode materials for the next-generation LIBs with high economic and environmental feasibility.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16865?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16865</a>.Additional experimental data including SEM, TEM, and HR-TEM images of Si–C and Si/C composite after cycles and EIS spectra of Si/C and pure Si before cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16865/suppl_file/am0c16865_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Low-Temperature Treated Lignin as Both Binder and Conductive Additive for Silicon Nanoparticle Composite Electrodes in Lithium-Ion Batteries

Advanced Inorganic Lithium Metasilicate Binder for High-Performance Silicon Anode.

High Performance Binder-Free SiO X /C Composite LIB Electrode Made of SiO X and Lignin

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

Inorganic/organic Composite Binder with Self-Healing Property for Silicon Anode in Lithium-Ion Battery

Pomegranate like silicon–carbon composites prepared from lignin-derived phenolic resins as anode materials for lithium-ion batteries

Silicon in Hollow Carbon Nanospheres Assembled Microspheres Cross‐linked with N‐doped Carbon Fibers toward a Binder Free, High Performance, and Flexible Anode for Lithium‐Ion Batteries

Polymer-Laden Composite Lignin-Based Electrolyte Membrane for High-Performance Lithium Batteries

Nano Silicon Composite with Gelatin/Melamine Derived N-doped Carbon as an Efficient Anode Material for Li-ion Batteries

Nanostructured Silicon-Carbon 3D Electrode Architectures for High-Performance Lithium-Ion Batteries

Silicon/Carbon Nanoparticles Assembled with Multifunction Carbon Nanotubes/Sheets as High-Performance Anode of Lithium-Ion Batteries

Lignin-Based Mesoporous Hollow Carbon @ MnO2 Nanosphere Composite as an Anodic Material for Lithium-Ion Batteries

Constructing a Stable Conductive Network for High-Performance Silicon-Based Anode in Lithium-Ion Batteries

Recycling of Lignin and Si Waste for Advanced Si/C Battery Anodes

Nano-silicon Embedded in Mildly-Exfoliated Graphite for Lithium-Ion Battery Anode Materials

Silicon-Encapsulated Hollow Carbon Nanofiber Networks As Binder-Free Anodes for Lithium Ion Battery

Dual Cross-Linked Fluorinated Binder Network for High-Performance Silicon and Silicon Oxide Based Anodes in Lithium-Ion Batteries

Si Nanoparticles Embedded in Porous N-Doped Carbon Fibers as a Binder-Free and Flexible Anode for High-Performance Lithium-Ion Batteries

Lignin-Based Mesoporous Hollow Carbon<i>@</i>MnO<sub>2</sub> Nanosphere Composite as an Anodic Material for Lithium-Ion Batteries

Electrolytic silicon/graphite composite from SiO2/graphite porous electrode in molten salts as a negative electrode material for lithium-ion batteries

Enhanced reversibility and cyclic stability of biomass-derived silicon/carbon anode material for lithium-ion battery