Dual-function surface hydrogen bonds enable robust O 2 activation for deep photocatalytic toluene oxidation

Hao Li,Fuze Jiang,Sarka Drdova,Huan Shang,Lizhi Zhang,Jing Wang

DOI: https://doi.org/10.1039/d0cy01907k

2021-01-01

Abstract:Extensive hydrogen-bonds between the hydroxyl-rich BiOCl surface and phosphoric acid significantly facilitate oxygen vacancy formation, O 2 activation, and deep toluene oxidation.

chemistry, physical

What problem does this paper attempt to address?

Dual-function surface hydrogen bonds enable robust O2 activation for deep photocatalytic toluene oxidation

Hao Li,Fuze Jiang,Sarka Drdova,Huan Shang,Lizhi Zhang,Jing Wang

DOI: https://doi.org/10.1039/d0cy01907k

IF: 6.177

2021-01-01

Catalysis Science & Technology

Abstract:Solar-driven molecular oxygen activation by semiconductor photocatalysts is a prototypical reaction manifesting complex interactions among photons, charge carriers, and reactants. In this study, we demonstrate that energetic O-2 activation towards volatile organic compound control can be realized via constructing a sophisticated surface hydrogen bond (HB) network having a dual-function. The extensive HBs established between the hydroxyl-rich BiOCl surface and phosphoric acid are first shown to significantly weaken surface Bi-O bonds, enabling facile oxygen vacancy (OV) generation. OVs, which act as reliable electron capture and static O-2 activation centers, reinforce the interaction between photons and excitons for rapid charge carrier separation. Moreover, dynamic O-2 activation with sluggish kinetics can be surmounted by another type of HB localized between hydroxyl groups of phosphoric acid and OV-adsorbed O-2. These unique localized HBs facilitate interfacial electron transfer from BiOCl to O-2, displaying a unique energy coupling route between charge carriers and reactants. For simulated indoor toluene oxidation, the substantially boosted O-2 activation is shown to accelerate the kinetic processes associated with the primary oxidation of toluene into benzaldehyde and benzoic acid, as well as aromatic ring opening towards deep oxidation. Undesirable intermediate accumulation and catalyst deactivation are thus avoided. The present work highlights the pivotal roles of HBs in robust photocatalytic O-2 activation. It will provide novel insights into the design of high-performance catalysts for efficient and safe control of indoor volatile organic compounds.
Effective Regulation of Surface Bridging Hydroxyls on TiO2 for Superior Photocatalytic Activity Via Ozone Treatment

Biyuan Liu,Boge Zhang,Jian Ji,Kai Li,Jianping Cao,Qiuyu Feng,Haibao Huang

DOI: https://doi.org/10.1016/j.apcatb.2021.120952

2022-01-01

Abstract:A gas-solid and postsynthetic modification was proposed to enrich surface bridging hydroxyls (OHB) on TiO2 using ozone. It was found that the adsorbed ozone and its decomposition into oxygen atoms on oxygen vacancies would induce water dissociation and form OHB, narrowing the bandgap and enhancing the photoresponse. The increased OHB significantly doubled the efficiency of photogenerated charge carriers transfer, thus generating more reactive oxygen species. Additionally, OHB provided more adsorption sites for toluene, contributing to the excellent activity and stability. The degradation pathways of toluene containing OH addition and hydrogen abstraction were proposed based on in situ DRIFTS results. Ozone treatment was more effective than other reported surface treatments, and presented a universal improvement on both gas-solid and liquid-solid photodegradation. This work provides a facile, effective, and alternative strategy for the targeted regulation of OHB on TiO2 under mild conditions and insight into the mechanism underlying the process.
Porous TiO2 Nanotubes with Spatially Separated Platinum and CoOx Cocatalysts Produced by Atomic Layer Deposition for Photocatalytic Hydrogen Production

Jiankang Zhang,Zhuobin Yu,Zhe Gao,Huibin Ge,Shichao Zhao,Chaoqiu Chen,Shuai Chen,Xili Tong,Meihua Wang,Zhanfeng Zheng,Yong Qin

DOI: https://doi.org/10.1002/anie.201611137

2017-01-01

Abstract:Efficient separation of photogenerated electrons and holes, and associated surface reactions, is a crucial aspect of efficient semiconductor photocatalytic systems employed for photocatalytic hydrogen production. A new CoOx/TiO2/Pt photocatalyst produced by template-assisted atomic layer deposition is reported for photocatalytic hydrogen production on Pt and CoOx dual cocatalysts. Pt nanoclusters acting as electron collectors and active sites for the reduction reaction are deposited on the inner surface of porous TiO2 nanotubes, while CoOx nanoclusters acting as hole collectors and active sites for oxidation reaction are deposited on the outer surface of porous TiO2 nanotubes. A CoOx/TiO2/Pt photocatalyst, comprising ultra-low concentrations of noble Pt (0.046 wt%) and CoOx (0.019 wt%) deposited simultaneously with one atomic layer deposition cycle, achieves remarkably high photocatalytic efficiency (275.9 mu molh(-1)), which is nearly five times as high as that of pristine TiO2 nanotubes (56.5 mu molh(-1)). The highly dispersed Pt and CoOx nanoclusters, porous structure of TiO2 nanotubes with large specific surface area, and the synergetic effect of the spatially separated Pt and CoOx dual cocatalysts contribute to the excellent photocatalytic activity.
Surface Hydrogen Bond-Induced Oxygen Vacancies of TiO 2 for Two-Electron Molecular Oxygen Activation and Efficient NO Oxidation

Huan Shang,Hongbao Jia,Wenbin Zhang,Shuangjun Li,Qing Wang,Qingyu Yang,Chi Zhang,Yuxin Shi,Yongjie Wang,Pengpeng Li,Yucheng He,Shuning Xiao,Ding Wang,Dieqing Zhang

DOI: https://doi.org/10.1021/acs.est.3c06593

IF: 11.4

2023-11-22

Environmental Science & Technology

Abstract:Defect engineering can provide a feasible approach to achieving ambient molecular oxygen activation. However, conventional surface defects (e.g., oxygen vacancies, OVs), featured with the coordinatively unsaturated metal sites, often favor the reduction of O(2) to •O(2)^(-) rather than O(2)^(2-) via two-electron transfer, hindering the efficient pollutant removal with high electron utilization. Herein, we demonstrate that this bottleneck can be well discharged by modulating the electronic...

environmental sciences,engineering, environmental
Activation of Water in Titanium Dioxide Photocatalysis by Formation of Surface Hydrogen Bonds: An In Situ IR Spectroscopy Study

Hua Sheng,Hongna Zhang,Wenjing Song,Hongwei Ji,Wanhong Ma,Chuncheng Chen,Jincai Zhao

DOI: https://doi.org/10.1002/anie.201412035

2015-03-25

Angewandte Chemie International Edition

Abstract:The hole-driving oxidation of titanium-coordinated water molecules on the surface of TiO2 is both thermodynamically and kinetically unfavorable. By avoiding the direct coordinative adsorption of water molecules to the surface Ti sites, the water can be activated to realize its oxidation. When TiO2 surface is covered by the H-bonding acceptor F, the first-layer water adsorption mode is switched from Ti coordination to a dual H-bonding adsorption on adjacent surface F sites. Detailed in situ IR spectroscopy and isotope-labeling studies reveal that the adsorbed water molecules by dual H-bonding can be oxidized to O2 even in the absence of any electron scavengers. Combined with theoretical calculations, it is proposed that the formation of the dual H-bonding structure can not only enable the hole transfer to the water molecules thermodynamically, but also facilitate kinetically the cleavage of O-H bonds by proton-coupled electron transfer process during water oxidation.

chemistry, multidisciplinary
Surface Hydrogen Bond Network Spatially Confined BiOCl Oxygen Vacancy for Photocatalysis

Hao Li,Shang Chen,Huan Shang,Xiaobing Wang,Zhiping Yang,Zhihui Ai,Lizhi Zhang

DOI: https://doi.org/10.1016/j.scib.2020.06.013

IF: 18.9

2020-01-01

Science Bulletin

Abstract:Rational engineering of oxygen vacancy (VO) at atomic precision is the key to comprehensively understanding the oxygen chemistry of oxide materials for catalytic oxidations. Here, we demonstrate that VO can be spatially confined on the surface through a sophisticated surface hydrogen bond (HB) network. The HB network is constructed between a hydroxyl-rich BiOCl surface and polyprotic phosphoric acid, which remarkably decreases the formation energy of surface VO by selectively weakening the metal–oxygen bonds in a short range. Thus, surface-confined VO enables us to unambiguously distinguish the intrafacial and suprafacial oxygen species associated with NO oxidation in two classical catalytic systems. Unlike randomly distributed bulk VO that benefits the thermocatalytic NO oxidation and lattice O diffusion by the dominant intrafacial mechanism, surface VO is demonstrated to favor the photocatalytic NO oxidation through a suprafacial scheme by energetically activating surface O2, which should be attributed to the spatial confinement nature of surface VO.
Oxygen Vacancy Structure Associated Photocatalytic Water Oxidation of BiOCl

Hao Li,Jian Shang,Huijun Zhu,Zhiping Yang,Zhihui Ai,Lizhi Zhang

DOI: https://doi.org/10.1021/acscatal.6b02613

IF: 12.9

2016-11-14

ACS Catalysis

Abstract:A central issue in understanding photocatalytic water splitting on a stoichiometric or defective nanostructured oxide surface is its adsorption mode and related reactivity. More than just improving the adsorption of water on oxide surfaces, we demonstrate in this work that surface oxygen vacancies (OVs) also offer a possibility of activating water toward thermodynamically enhanced photocatalytic water oxidation, while the water activation state, as reflected by its capability to trap holes, strongly depends on the structures of OVs. Utilizing well-ordered BiOCl single-crystalline surfaces, we reveal that dissociatively adsorbed water on the OV of the (010) surface exhibits higher tendency to be oxidized than the molecularly adsorbed water on the OV of the (001) surface. Analysis of the geometric atom arrangement shows that the OV of the BiOCl (010) surface can facilitate barrierless O–H bond breaking in the first proton removal reaction, which is sterically hindered on the OV of the BiOCl (001) surface, and also allow more localized electrons transfer from the OV to the dissociatively adsorbed water, leading to its higher water activation level for hole trapping. These findings highlight the indispensable role of crystalline surface structure on water oxidation and may open up avenues for the rational design of highly efficient photocatalysts via surface engineering.

chemistry, physical
Combining High Photocatalytic Activity and Stability Via Subsurface Defects in TiO2

Yan Liu,Qing Zhu,Xiyu Li,Guozhen Zhang,Yudan Liu,Shaobin Tang,Edward Sharman,Jun Jiang,Yi Luo

DOI: https://doi.org/10.1021/acs.jpcc.8b04037

2018-01-01

Abstract:Surface defects consisting of oxygen vacancy in TiO2 provide sites with high photocatalytic activity, while their photocatalytic stability is often undermined because of the trapping of oxygen species. Here, we conducted a theoretic study to propose the use of subsurface oxygen vacancies in anatase TiO2(101) for photocatalytic water-splitting, aiming to combine both high activity and stability. This study demonstrates that subsurface defects expand light-harvesting ability of TiO2 to the visible light region and facilitate photogenerated charge separation, and these results were then verified by experiments. These vacancies also bestow high catalytic activity on sites of water adsorption and oxidation above them on the defect-free surface. Importantly, subsurface defects are inert toward reactive oxygen species, ensuring high stability for the nearby surface catalytic sites. These results demonstrate the role of subsurface oxygen vacancies in catalyzing oxygen evolution reaction, leading to a new design strategy for photocatalytic or catalytic oxide materials.
Pt-surface oxygen vacancies coupling accelerated photo-charge extraction and activated hydrogen evolution

Fangxu Dai,Mingming Zhang,Mingzhong Mi,Zhenjiang Li,Jun Xing,Lei Wang

DOI: https://doi.org/10.1007/s12274-022-5181-x

IF: 9.9

2022-11-25

Nano Research

Abstract:Semiconductors-based heterogeneous photocatalytic water splitting has been extensively studied, but it still remains challenging to accelerate the separation of electron—hole pairs and facilitate the reaction kinetics. Here we report a general strategy to fabricate highly efficient Pt/TiO 2 photocatalyst by coupling the Pt co-catalysts and surface oxygen vacancies (V O ) of TiO 2 . TiO 2 was pre-modified with alkali or alkaline earth metals ion solutions, which produce a large number of surface hydroxyl on TiO 2 . Subsequently, the photodeposited Pt sub-nanoparticles substitute surface hydroxyl and induce surface V O on TiO 2 . The coupling of Pt and surface V O on TiO 2 can accelerate the extraction of photo-charges through the interaction of Pt—V O —Ti bonds and reduce the hydrogen evolution barrier, thereby promoting the photocatalytic activity. The synthesized Pt-V O -TiO 2 sample exhibits a photocatalytic hydrogen evolution activity as high as 1.5 L·g −1 ·h −1 , which is 2.2 times that of traditional Pt/TiO 2 . Our findings in-depth understand the synergistic effect of co-catalysts and defects on photocatalysis and open up new possibilities for achieving robust photocatalytic water splitting.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Efficient promotion of charge transfer and separation in hydrogenated TiO2/WO3 with rich surface-oxygen-vacancies for photodecomposition of gaseous toluene

Juan-Juan Li,Bo Weng,Song-Cai Cai,Jing Chen,Hong-Peng Jia,Yi-Jun Xu

DOI: https://doi.org/10.1016/j.jhazmat.2017.08.077

IF: 13.6

2018-01-01

Journal of Hazardous Materials

Abstract:Oxygen-deficient TiO2/WO3 constructed via the controllable temperature of hydrogen annealing is designed in view of combining the broad visible spectrum absorption with the prominent coupled semiconductor properties. Surface lattice disorder of TiO2/WO3 arises at hydrogen annealing temperature of 200 and 300°C, while critical phase transition from TiO2/WO3 to TiO2/WO2.9 occurs at 400°C, both of which can introduce oxygen vacancies. The hydrogenated TiO2/WO3 with rich surface-oxygen-vacancies exhibits much higher photocatalytic activity for decomposition of gaseous toluene than pristine TiO2/WO3 under visible-light illumination (λ>420nm). The photoelectrochemical analysis shows that the improved electronic properties of oxygen-deficient TiO2/WO3 enable dramatically efficient promotion of photoinduced charge transfer and separation, which is the key factor for the improved photocatalytic activity. It is hoped that the present work could boost ongoing interest for preparing various hydrogenated coupled semiconductors with enhanced activity for diverse photocatalytic applications.

environmental sciences,engineering, environmental
Hydroxyl-Bonded Co Single Atom Site on Boroncarbonitride Surface Realizes Nonsacrificial H2O2 Synthesis in the Near-Infrared Region.

Honghui Ou,Yu Jin,Ben Chong,Jiahui Bao,Song Kou,He Li,Yang Li,Xiaoqing Yan,Bo Lin,Guidong Yang

DOI: https://doi.org/10.1002/adma.202404851

IF: 29.4

2024-01-01

Advanced Materials

Abstract:Photocatalytic synthesis of hydrogen peroxide (H2O2) from O-2 and H2O under near-infrared light is a sustainable renewable energy production strategy, but challenging reaction. The bottleneck of this reaction lies in the regulation of O-2 reduction path by photocatalyst. Herein, the center of the one-step two-electron reduction (OSR) pathway of O-2 for H2O2 evolution via the formation of the hydroxyl-bonded Co single-atom sites on boroncarbonitride surface (BCN-OH2/Co-1) is constructed. The experimental and theoretical prediction results confirm that the hydroxyl group on the surface and the electronic band structure of BCN-OH2/Co-1 are the key factor in regulating the O-2 reduction pathway. In addition, the hydroxyl-bonded Co single-atom sites can further enrich O-2 molecules with more electrons, which can avoid the one-electron reduction of O-2 to center dot O-2(-), thus promoting the direct two-electron activation hydrogenation of O-2. Consequently, BCN-OH2/Co-1 exhibits a high H2O2 evolution apparent quantum efficiency of 0.8% at 850 nm, better than most of the previously reported photocatalysts. This study reveals an important reaction pathway for the generation of H2O2, emphasizing that precise control of the active site structure of the photocatalyst is essential for achieving efficient conversion of solar-to-chemical.
Incorporation of graphene nanodots and oxygen defects triggers robust coupling between solar energy and reactive oxygen

Yuchen Hao,Xiaoli Dong,Xiuying Wang,Hongchao Ma,Xiufang Zhang

DOI: https://doi.org/10.1039/c6ta10114c

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Efficient coupling between solar energy and active oxygen-related radicals plays a very important role in promoting photocatalytic oxidation processes; however, the poor solar energy harvesting, serious carrier recombination and especially sluggish interfacial reaction kinetics always make this process very inefficient. Here we report for the first time that the synergy mechanism between surface oxygen defects and graphene nanodots over the TiO2 photocatalyst boosts the solar-to-chemical energy conversion and hence enables the ultra-efficient photocatalytic decomposition of volatile organic compounds (VOCs). As a proof of concept, the surface oxygen defect incorporation not only can effectively suppress surface charge recombination, but also can promote the chemisorption of oxygen and hence enables robust H2O2 evolution over the TiO2 photocatalyst through visible-near-infrared illumination. The graphene nanodots (GDs), which were originally synthesized via an electrochemical tailoring method and possess excellent peroxidase activity can substitute Fe3+ to trigger robust solid-gas interfacial Fenton-like reaction (the rigorous reaction environment of the classic Fenton reaction greatly limits its implementation under ordinary air conditions). In addition, the excellent photophysical properties of GDs also can act as a sensitizer to further optimize the light harvesting performance of the resultant hybrid from the UV to NIR region. As a surprising achievement, the robust interfacial Fenton-like reaction, broader optical window and efficient charge separation endow the hybrid catalyst with ultra-efficient energy coupling between photons, excitons and oxygen-related radicals, and hence enable excellent photocatalytic oxidation activity for the decomposition of various VOCs.
Surface oxygen vacancies promoted Pt redispersion to single-atoms for enhanced photocatalytic hydrogen evolution

Jinmeng Cai,Ang Cao,Zhenbin Wang,Siyu Lu,Zheng Jiang,Xi-Yan Dong,Xingang Li,Shuang-Quan Zang

DOI: https://doi.org/10.1039/d1ta01400e

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:In situ formed surface oxygen vacancies on TiO 2 can redisperse Pt nanoparticles to stable single-atoms through hydrogen spillover effect. The catalyst displays both high photocatalytic hydrogen evolution performance and atom-utilization efficiency.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Surface Lattice Oxygen Activation on Sr2Sb2O7 Enhances the Photocatalytic Mineralization of Toluene: from Reactant Activation, Intermediate Conversion to Product Desorption

Lvcun Chen,Peng Chen,Hong Wang,Wen Cui,Jianping Sheng,Jieyuan Li,Yuxin Zhang,Ying Zhou,Fan Dong

DOI: https://doi.org/10.1021/acsami.0c20996

IF: 9.5

2021-01-01

ACS Applied Materials & Interfaces

Abstract:Transition-metal oxide photocatalysis has attracted increasing attention in environmental remediation and solar energy conversion. Surface lattice oxygen is the key active site on the metal oxide, but its role and activation mechanism in the photocatalytic VOC mineralization are still unclear. In this work, we have demonstrated that Sr2Sb2O7 exhibits an excellent photocatalytic activity and stability compared to TiO2 (P25) in gaseous toluene mineralization because the lattice oxygen on Sr2Sb2O7 can be activated efficiently. The lattice oxygen of Sr2Sb2O7 promotes the adsorption and activation of O-2 and H2O molecules and enhances the production of O-center dot(2)- and (OH)-O-center dot radicals, as confirmed by the electron spin resonance and DFT calculations. The in situ diffuse reflectance infrared Fourier transform spectroscopy spectra are applied to dynamically monitor the intermediate activation and selective conversion. Combined with DFT calculation, the role and the mechanism of lattice oxygen in photocatalysis have been revealed. Owing to the promoted surface lattice oxygen, the selectivity for benzoic acid formation is enhanced and final product desorption is promoted, which could largely advance the ring opening and mineralization of toluene. This work reveals the origin of lattice oxygen activation and the role for efficient VOC degradation at the atomic scale.
Synergy of surface fluorine and oxygen vacancy of TiO2 nanosheets for O2 activation in selective photocatalytic organic transformations

Guoming Gao,Ximeng Wang,Qifeng Chen,Caibo Xie,Jie Zheng,Huailin Fan,Lulu Ma,Ruifang Guan,Yanfen Fang,Xun Hu

DOI: https://doi.org/10.1039/d0tc04874g

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:Surface fluorinated TiO2 has received extensive attention in recent years due to the improved photocatalytic reactivity compared with that of pure TiO2. However, the synergy of surface fluorine (F-S) and oxygen vacancy (V-O) is not clear and needs further study. Here we systematically studied the effect of F-S, V-O and acidic sites of TiO2 nanosheets on the selective photocatalytic oxidation of benzylamine to imine. The photocatalytic activity first increased and then decreased as the content of F-S decreased and V-O increased. The photocatalytic activity reached a summit with the imine yield of 92.1% over TiO2-B-6 h, which is mainly due to the synergy between F-S and adjacent V-O, forming the frustrated Lewis pair that boosts the activation of O-2. The varied contents of F-S and V-O not only cause an evident change in the amount of acidic sites, but also affect the band structure and separation efficiency of charge carriers. The experimental and calculation results demonstrate that the coexistence of F-S and V-O boosted the separation efficiency, density and mobility of photogenerated charge carriers, resulting in the improved photocatalytic activity. The improved photocatalytic activity can be attributed to the combined effects of F-S, V-O and acidic sites. This work provides a strategy for the explicit regulation of surface species on TiO2 nanosheets for improved photocatalytic activity.
Surface Lattice Oxygen Activation on Sr 2 Sb 2 O 7 Enhances the Photocatalytic Mineralization of Toluene: from Reactant Activation, Intermediate Conversion to Product Desorption

Lvcun Chen,Peng Chen,Hong Wang,Wen Cui,Jianping Sheng,Jieyuan Li,Yuxin Zhang,Ying Zhou,Fan Dong

DOI: https://doi.org/10.1021/acsami.0c20996

2021-01-21

Abstract:Transition-metal oxide photocatalysis has attracted increasing attention in environmental remediation and solar energy conversion. Surface lattice oxygen is the key active site on the metal oxide, but its role and activation mechanism in the photocatalytic VOC mineralization are still unclear. In this work, we have demonstrated that Sr2Sb2O7 exhibits an excellent photocatalytic activity and stability compared to TiO2 (P25) in gaseous toluene mineralization because the lattice oxygen on Sr2Sb2O7 can be activated efficiently. The lattice oxygen of Sr2Sb2O7 promotes the adsorption and activation of O2 and H2O molecules and enhances the production of •O2– and •OH radicals, as confirmed by the electron spin resonance and DFT calculations. The in situ diffuse reflectance infrared Fourier transform spectroscopy spectra are applied to dynamically monitor the intermediate activation and selective conversion. Combined with DFT calculation, the role and the mechanism of lattice oxygen in photocatalysis have been revealed. Owing to the promoted surface lattice oxygen, the selectivity for benzoic acid formation is enhanced and final product desorption is promoted, which could largely advance the ring opening and mineralization of toluene. This work reveals the origin of lattice oxygen activation and the role for efficient VOC degradation at the atomic scale.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20996?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20996</a>.Schematic illustrations for the continuous photocatalytic reactor, in situ DRIFTS reactors, SEM image of prepared Sr2Sb2O7 at higher magnification, PL spectra of P25 and Sr2Sb2O7, full spectrum of in situ DRIFTS with/without O2 and H2O, bond lengths of Ti–O and Sb–O, and assignments of the DRIFTS bands (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20996/suppl_file/am0c20996_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Dual-site oxygen activation for enhanced photocatalytic aerobic oxidation by S-scheme Ni2P/Bi3O4Br-OVs heterojunction

Weijie Yang,Kailong Sun,Jun Wan,Yang-Ai Ma,Yu Wang,Lin Liu,Bicheng Zhu,Feng Fu

DOI: https://doi.org/10.1016/j.cej.2022.139425

IF: 15.1

2023-01-15

Chemical Engineering Journal

Abstract:Solar-driven activation of molecular oxygen (O2) offers an appealing strategy to realize aerobic oxidation catalysis at room temperature, while the efficiency of photocatalytic O2 activation is severely limited by lacking O2 adsorption sites and poor carrier utilization. Herein, an efficient Ni2P/Bi3O4Br-OVs heterojunction is firstly proposed to overcome the limitation by the dual-site design of oxygen vacancies (OVs) and on Ni2P cocatalyst. By the joint observations from spectroscopic measurements and theoretical simulations, the introduction of OVs and Ni2P on Bi3O4Br nanosheets can not only optimize the light absorption, facilitate the separation and transfer of photogenerated charge carrier through the S-scheme mechanism, but also provide active sites for effective adsorption and activation of oxygen molecules, thereby contributing to highly efficient generation of •O2− radicals. Benefiting from the more oxidative active species of •O2− and h+, the Ni2P/Bi3O4Br-OVs photocatalyst achieves near-unity conversion rate and selectivity in aerobic oxidation of sulfide to sulfoxide, and it also exhibits outstanding photoactivity in the aerobic degradation of phenolic pollutants under visible light. This study showcases a feasible O2 activation approach by defect and heterojunction engineering, and provides a new perspective for designing high-performance photocatalysts in the field of aerobic oxidation catalysis.

engineering, chemical, environmental
Atomically dispersed Ti-O clusters anchored on NH2-UiO-66(Zr) as efficient and deactivation-resistant photocatalyst for abatement of gaseous toluene under visible light

Liang-Yi Lin,Chieh Liu,Van Dien Dang,Hsuan-Ting Fu

DOI: https://doi.org/10.1016/j.jcis.2022.12.147

Abstract:Photocatalytic oxidation (PCO) of volatile organic compounds (VOCs) over MOF-based photocatalysts is considerably impeded by the weak activation of reactant molecules on the catalyst surface and low charge carrier mobility. In this study, we demonstrate that atomically dispersed Ti species anchored on NH2-UiO-66(Zr) (AUiO-66(Zr/Ti)) exhibit high visible-light-responsive photocatalytic activity toward toluene vapor with an 83 % removal efficiency and 89 % CO2 selectivity. These results are markedly superior to those reported in the literature. More importantly, AUiO-66(Zr/Ti) exhibited excellent catalytic stability during a prolonged reaction, while its pristine AUiO-66(Zr) counterpart underwent rapid catalytic deactivation after a few hours. The optimized sample, AUiO-66(Zr/Ti)-4h, provided extended visible light absorption and enhanced charge carrier mobility due to ligand-to-linker metal charge transfer. Meanwhile, the defect-rich surface of AUiO-66(Zr/Ti)-4h facilitated the activation of H2O/toluene molecules into the critical intermediates of hydroxyl, benzoic acid, and maleic anhydride, which were effectively converted under visible light illumination. On the basis of the combined results of the PCO of toluene and material characterization, the structure - activity relationship and the related catalytic mechanism are discussed comprehensively.
Hydrogen-Bond Bridged Water Oxidation on {001} Surfaces of Anatase TiO2

Hongna Zhang,Peng Zhou,Zuofeng Chen,Wenjing Song,Hongwei Ji,Wanhong Ma,Chuncheng Chen,Jincai Zhao

DOI: https://doi.org/10.1021/acs.jpcc.6b11900

2017-01-01

The Journal of Physical Chemistry C

Abstract:To gain an atomic-level understanding of the relationship among the surface structure, the interfacial interaction, and the water oxidation activity on TiO2, we studied the adsorption of water and its photocatalytic oxidation on anatase TiO2 with {101} and {001} exposed surfaces by in situ infrared spectroscopy, kinetic isotope effect studies, and density functional theory (DFT)-based molecular dynamics calculations. Our experimental results demonstrate that the oxidation reaction occurs exclusively on hydrogen-bonded water molecules (via surface hydroxyls) over {001} surface, whereas water molecules coordinated on the {101} surface, which are conventionally assigned to the reactive target for hole transfer, remain unchanged during the irradiation. The theoretical calculations reveal that the selective oxidation of water adsorbed on the {001} surfaces is primarily attributed to the formation of hydrogen bonds, which provides a channel to the rapid hole transfer and facilitates the O-H bond cleavage during water oxidation.
Surface oxygen vacancies enriched FeOOH/Bi 2 MoO 6 photocatalysis- fenton synergy degradation of organic pollutants.

Jinshan Hu,Jing Li,Jifang Cui,Weijia An,Li Liu,Yinghua Liang,Wenquan Cui

DOI: https://doi.org/10.1016/j.jhazmat.2019.121399

IF: 13.6

2020-01-01

Journal of Hazardous Materials

Abstract:To achieve rapid separation of photogenerated charges, increase photocatalytic degradation activity, a visible light-driven FeOOH/Bi2MoO6-OVs photocatalyst was designed and successfully fabricated via solvothermal synthesis and calcination. H2O2 was added under visible light irradiation to form a heterogeneous photo catalysis-Fenton synergy system. Using visible light irradiation, 10% FeOOH/Bi2MoO6-OVs had the best degradation activity. The removal efficiency of phenol was 100% within 3 h, which was 1.54 times and 1.33 times of the degradation efficiency of photocatalysis and Fenton alone, respectively. The catalyst has high removal activity for various pollutants and good cycle stability. Hydroxyl radicals and superoxide radicals have proven to be the main active substances and a reasonable catalytic mechanism was proposed. Surface oxygen vacancy can not only reduce the width of band gap, promote the separation and migration of photogenerated electron-hole pairs, but also make the O-O bond of H2O2 elongate and weaken, making it easier to react with FeOOH and realize the synergistic effect of photocatalysis-Fenton. Simultaneously, the oxygen vacancies located near the valence band can capture holes, and the holes are rapidly transferred to the surface of the catalyst and participated in the degradation of pollutants.

Dual-function surface hydrogen bonds enable robust O 2 activation for deep photocatalytic toluene oxidation

Dual-function surface hydrogen bonds enable robust O<sub>2</sub> activation for deep photocatalytic toluene oxidation

Effective Regulation of Surface Bridging Hydroxyls on TiO2 for Superior Photocatalytic Activity Via Ozone Treatment

Porous TiO2 Nanotubes with Spatially Separated Platinum and CoOx Cocatalysts Produced by Atomic Layer Deposition for Photocatalytic Hydrogen Production

Surface Hydrogen Bond-Induced Oxygen Vacancies of TiO 2 for Two-Electron Molecular Oxygen Activation and Efficient NO Oxidation

Activation of Water in Titanium Dioxide Photocatalysis by Formation of Surface Hydrogen Bonds: An In Situ IR Spectroscopy Study

Surface Hydrogen Bond Network Spatially Confined BiOCl Oxygen Vacancy for Photocatalysis

Oxygen Vacancy Structure Associated Photocatalytic Water Oxidation of BiOCl

Combining High Photocatalytic Activity and Stability Via Subsurface Defects in TiO2

Pt-surface oxygen vacancies coupling accelerated photo-charge extraction and activated hydrogen evolution

Efficient promotion of charge transfer and separation in hydrogenated TiO2/WO3 with rich surface-oxygen-vacancies for photodecomposition of gaseous toluene

Hydroxyl-Bonded Co Single Atom Site on Boroncarbonitride Surface Realizes Nonsacrificial H2O2 Synthesis in the Near-Infrared Region.

Incorporation of graphene nanodots and oxygen defects triggers robust coupling between solar energy and reactive oxygen

Surface oxygen vacancies promoted Pt redispersion to single-atoms for enhanced photocatalytic hydrogen evolution

Surface Lattice Oxygen Activation on Sr<sub>2</sub>Sb<sub>2</sub>O<sub>7</sub> Enhances the Photocatalytic Mineralization of Toluene: from Reactant Activation, Intermediate Conversion to Product Desorption

Synergy of surface fluorine and oxygen vacancy of TiO<sub>2</sub> nanosheets for O<sub>2</sub> activation in selective photocatalytic organic transformations

Surface Lattice Oxygen Activation on Sr 2 Sb 2 O 7 Enhances the Photocatalytic Mineralization of Toluene: from Reactant Activation, Intermediate Conversion to Product Desorption

Dual-site oxygen activation for enhanced photocatalytic aerobic oxidation by S-scheme Ni2P/Bi3O4Br-OVs heterojunction

Atomically dispersed Ti-O clusters anchored on NH2-UiO-66(Zr) as efficient and deactivation-resistant photocatalyst for abatement of gaseous toluene under visible light

Hydrogen-Bond Bridged Water Oxidation on {001} Surfaces of Anatase TiO2

Surface oxygen vacancies enriched FeOOH/Bi 2 MoO 6 photocatalysis- fenton synergy degradation of organic pollutants.