Optimization of linear consecutive-k-out-of-n system with a Birnbaum importance-based genetic algorithm

Zhiqiang Cai,Shubin Si,Shudong Sun,Caitao Li

DOI: https://doi.org/10.1016/j.ress.2016.03.016

IF: 7.247

2016-08-01

Reliability Engineering & System Safety

Abstract:

What problem does this paper attempt to address?

Ant Colony Optimization Algorithm for the 0-1 Knapsack Problem Based on Genetic Operators

Zhijun Hu,Rong Li

DOI: https://doi.org/10.4028/www.scientific.net/amr.230-232.973

2011-01-01

Advanced Materials Research

Abstract:0-1 knapsack problem is a typical combinatorial optimization question in the design and analysis of algorithms. The mathematical description of the knapsack problem is given in theory. The 0-1 knapsack problem is solved by ant colony optimistic algorithm that is improved by introducing genetic operators. To solve the 0-1 knapsack problem with the improved ant colony algorithm, experimental results of numerical simulations, compared with greedy algorithm and dynamic programming algorithm, have shown obvious advantages in efficiency and accuracy on the knapsack problem.
A new genetic algorithm to handle the constrained optimization problem

Shengjing Mu,Hongye Su,Weijie Mao,Zhenyi Chen,Jian Chu

DOI: https://doi.org/10.1109/CDC.2002.1184593

2002-01-01

Abstract:A genetic algorithm to handle the constrained optimization problem without penalty function term is proposed. The infeasibility degree of a solution (IFD) is defined as the sum of the square value of all the constraints violation to identify the constraints violation of the solutions quantitative. At the end of general GAs operation, an infeasibility degree selection of the current population is designed by checking whether the IFD of a solution is less than or equal to a threshold or not to decide the candidate solution is accepted or rejected. The initial results of solving two typical constrained optimization problems show the promising performance of the proposed method.
Optimal Design of Binary Weighted K-Out-Of-N Systems

Wei Li,Ming J. Zuo,Yi Ding

DOI: https://doi.org/10.1142/s0218539308003143

2008-01-01

International Journal of Reliability Quality and Safety Engineering

Abstract:In this paper, we consider the optimal design of the binary weighted k-out-of-n system. The binary weighted k-out-of-n: G system works if and only if the total utility of all working components is at least k. In the design process, we need to evaluate system reliability repetitively. The universal generating function (UGF) approach is used for this purpose when the system size is small or moderate. When the size of the system is large, the recursive approach is used, which is more efficient. Two optimal models are formulated. One is to minimize the expected total cost while guaranteeing the system reliability higher than a pre-specified value; the other is to maximize the system reliability with the constraints on total system cost. Genetic algorithms (GA) and Tabu Search (TS) methods are both used to solve the proposed optimization models. Since the key to a good TS algorithm is usually quite problem-specific policies and memory structures, there is no existing general TS tool available. Therefore more details of the TS approach used in this paper are discussed than the GA approach. The results obtained with these two methods are compared. The results illustrate that both methods are powerful tools for solving these kinds of problems. However TS is more efficient than GA in computation. The materials in this paper have been published in 19.
An Adaptive Real Coded Population-Based Incremental Learning Algorithm for Design Optimizations in Continuous Space

Jian Yang,Yong Zhang,Linggang Zhou,Xin Lv,Yuntu Jiang,Qiuxiao Wang,Shiyou Yang

DOI: https://doi.org/10.1109/CIYCEE59789.2023.10401742

2023-01-01

Abstract:In a traditional evolutionary algorithm, the selection, crossover, and mutation are commonly used to evolve its searching procedure. For a robust and feasible evolutionary algorithm, these operators must be properly designed. Nevertheless, the proper design of these operators is not an easy task. On the other hand, it would be preferable for an algorithm that the previously explored solutions can be used to help the creation of new solutions or states. In this point of view, evolutionary methods using probabilistic models are deserved further attentions. The Population-Based Incremental Learning (PBIL) algorithm can be categorized into this type of algorithms. The PBIL is initially developed as a binary coded algorithm, and is awkward to some extent in applying to solve a design problem with continuous variables. In this respect, an adaptive continuous PBIL is introduced. In the newly improved PBIL method, an automatic mechanism is presented to update the probability matrix, which is adopted to stochastically produce the offspring, to obtain a balance among the fast convergence and the high quality final solution. Two examples are numerically solved by the introduced PBIL method to highlight its advantages and deficiencies.
Optimization of scale-based product family using multiobjective genetic algorithm

LI Zhong-kai,TAN Jian-rong,FENG Yi-xiong,Zhe Wei

DOI: https://doi.org/10.3785/j.issn.1008-973X.2008.06.023

2008-01-01

Abstract:An optimization process using nondominated sorting genetic algorithm-II (NSGA-II) was put forward based on the theoretical model and the optimization model of scale-based product family. Based on the mathematical model of product family design, the Pareto set for the multiobjective optimization problem was obtained using NSGA-II. An approach based on fuzzy set theory was developed to extract one of the Pareto-optimal solutions as the best compromise one. During the first stage, each product in the family was optimized independently with NSGA-II. The design variables that showed small deviations were held constant to form the product platform. In the second stage, the scaling variables of each instance product were developed also using NSGA-II. The performance of instance product was improved on the premise that the design requirements of scale-based product family were satisfied. The efficiency and effectiveness of the proposed method were illustrated by the optimization design of the scale-based universal motor families and the comparison against the designs obtained from the one-stage-Ps method.
Optimization of Scale Based Product Family Using Multiobjective Genetic Algorithm

LI Zhong-kai,TAN Jian-rong,FENG Yi-xiong,WEI Zhe

DOI: https://doi.org/10.3785/j.issn.1008-973x.2008.06.023

2008-01-01

Abstract:An optimization process using nondominated sorting genetic algorithm-II(NSGA-II) was put forward based on the theoretical model and the optimization model of scale-based product family.Based on the mathematical model of product family design,the Pareto set for the multiobjective optimization problem was obtained using NSGA-II.An approach based on fuzzy set theory was developed to extract one of the Pareto-optimal solutions as the best compromise one.During the first stage,each product in the family was optimized independently with NSGA-II.The design variables that showed small deviations were held constant to form the product platform.In the second stage,the scaling variables of each instance product were developed also using NSGA-II.The performance of instance product was improved on the premise that the design requirements of scale-based product family were satisfied.The efficiency and effectiveness of the proposed method were illustrated by the optimization design of the scale-based universal motor families and the comparison against the designs obtained from the one-stage-Ps method.
Redundancy optimization for multi-state series-parallel systems using ordinal optimization-based-genetic algorithm

Yishuang Hu,Yi Ding,Zhiguo Zeng

DOI: https://doi.org/10.1177/1748006X211028699

2021-07-13

Abstract:Multi-state series-parallel systems (MSSPSs) are widely-used for representing engineering systems. In real-life cases, engineers need to design an optimal MSSPS structure by combining different versions and number of redundant components. The objective of the design is to ensure reliability requirements using the least costs, which could be formulated as a redundancy optimization problem under reliability constraints. The genetic algorithm is one of the most frequently used method for solving redundancy optimization problems. In traditional genetic algorithms, the population size needs to be determined based on the experience of the modeler. Often, this ends up creating a large number of unnecessary samples. As a result, the computational burden can be huge, especially for large-scale MSSPS structures. To solve these problems, this paper proposes an optimal structure designing method named as redundancy ordinal optimization. The universal generating function technique is applied to evaluate the reliabilities of the MSSPSs. Based on the reliabilities, an ordinal optimization algorithm is adapted to update the parent populations and the stopping criterion of genetic algorithm, so that the unnecessary structure designs can be eliminated. Numerical examples show that the proposed method improves the computational efficiency while remaining satisfactorily accurate.
Continuous Optimization Algorithm Based on DNA

B Fahs,T Rafacz,SJ Patel,SS Lumetta

DOI: https://doi.org/10.3778/j.issn.1002-8331.2011.22.014

2011-01-01

Abstract:The application of genetic algorithm for continuous optimization field has been proved to be effective.Compared with traditional genetic algorithm,DNA algorithm enjoys more advantages,such as more abundant encoding,more diversified decoding,more convenient gene operation and easier realization on DNA computers.So a continuous optimization algorithm based on DNA is proposed.In this algorithm,notations of DNA base pair are used for DNA encoding;translated DNA codens represent function variables;reproduction,crossover,mutation and inversion operations are used to realize the search for solution space.Meanwhile,some other strategies,elitist model and simulated annealing for example,are used to obtain a higher convergence speed and a better diversity.As a result,the algorithm will have lower probability plunging into a local minimum or premature situation.The computer simulation experiments indicate that the algorithm is of high search efficiency and convergence speed.The result is satisfied.
Ordinal Optimization of Parameters and Operators for Genetic Algorithm

王凌,张亮,唐芳

DOI: https://doi.org/10.3969/j.issn.1672-7207.2003.04.005

2003-01-01

Abstract:The optimization quality and efficiency of genetic algorithm highly depend on its parameters and operators, such as population size, crossover and mutation probabilities, selection, crossover and mutation operators. However, it often needs trial and error to determine suitable parameters and operators, so it is still an important open problem on GA research. Based on ordinal optimization and optimal computing budget allocation, the considered issue was regards as a stochastic optimization problem and a systematical method to determine optimal parameters and operators for GA with limited computation effort was proposed. Simulation results show that the proposed approach is able to reasonably determine optimal parameters and operators and provide suitable evaluation for GA simultaneously.
A GENETIC ALGORITHM BASED ON OPTIMALITY CONDITIONS FOR NONLINEAR BILEVEL PROGRAMMING PROBLEMS

Hecheng Li,Yuping Wang

2010-01-01

Journal of applied mathematics & informatics

Abstract:For a class of nonlinear bilevel programming problems in which the follower's problem is linear, the paper develops a genetic algorithm based on the optimality conditions of linear programming. At first, we denote an individual by selecting a base of the follower's linear programming, and use the optimality conditions given in the simplex method to denote the follower's solution functions. Then, the follower's problem and variables are replaced by these optimality conditions and the solution functions, which makes the original bilevel programming become a single-level one only including the leader's variables. At last, the single-level problem is solved by using some classical optimization techniques, and its objective value is regarded as the fitness of the individual. The numerical results illustrate that the proposed algorithm is efficient and stable.
Solving Nonlinear Equations System Via an Efficient Genetic Algorithm with Symmetric and Harmonious Individuals

Hongmin Ren,Long Wu,Weihong Bi,Ioannis K. Argyros

DOI: https://doi.org/10.1016/j.amc.2013.04.041

IF: 4.397

2013-01-01

Applied Mathematics and Computation

Abstract:We present an efficient genetic algorithm as a general tool for solving optimum problems. As a specialized application this algorithm can be used to approximate a solution of a system of nonlinear equations on n-dimensional Euclidean space setting. The new idea involves the introduction of some pairs of symmetric and harmonious individuals for the generation of a genetic algorithm. The population diversity is maintained better this way. The elitist model is used to ensure the convergence. Simulation results show that the new method is indeed very effective.
A modified hybrid rice optimization algorithm for solving 0-1 knapsack problem

Zhe Shu,Zhiwei Ye,Xinlu Zong,Shiqin Liu,Daode Zhang,Chunzhi Wang,Mingwei Wang

DOI: https://doi.org/10.1007/s10489-021-02717-4

IF: 5.3

2021-08-20

Applied Intelligence

Abstract:The 0-1 knapsack problem (KP) is a classic NP-hard problem and could be handled by swarm intelligence algorithms. However, most of these algorithms might be trapped in the local optima as the scale increases. Hybrid rice optimization (HRO) is a novel swarm intelligence algorithm inspired by the breeding process of Chinese three-line hybrid rice, its population is classified into three types such as the maintainer, restorer and sterile line and several stages including hybridization, selfing and renewal are implemented. In this paper, a modified HRO algorithm is proposed for the complicated large-scale 0-1 KP. A dynamic step is introduced in the renewal stage to balance the exploration and exploitation phases. Moreover, HRO is combined with binary ant colony optimization (BACO) algorithm to compose the parallel model and serial model for enhancing the convergence speed and search efficiency. In the parallel model, HRO and BACO are independently implemented on two subpopulations and communicate during each iteration. In the serial model, BACO is embedded in HRO as an operator to update the maintainer line. The experimental results on 0-1 KPs of different scales and correlations demonstrate the outperformance of the parallel model and serial model.

computer science, artificial intelligence
An effective offspring generation strategy for many-objective optimization driven by knee points under variable classification

Li-sen Wei,Er-chao Li

DOI: https://doi.org/10.1007/s10489-022-03307-8

IF: 5.3

2022-04-02

Applied Intelligence

Abstract:In many-objective optimization problems, the difficulty of optimization increases as the number of targets increases. When the number of objectives increases, the individuals become extremely sparse in the objective space and the performance of environmental selection strategies weaken. To solve this problem, we proposed an effective offspring generation strategy driven by knee points under variable classification, termed VKOS. In VKOS, there is no mating selection, and the excellent genes of the knee points are used to guide the generation of outstanding individuals with different attributes directionally. Specifically, first, the convergence variables and diversity variables of the problem are obtained by variable classification; then identify the knee points of the current population, and finally propose a parallel mutation method to mutate the current population to obtain offspring. In order to verify the versatility and effectiveness of the strategy, RPEA-VKOS, NSGAIII-VKOS, RPDNSGAII-VKOS, MaOEA/IBP-VKOS compared with the original algorithm on 16 widely used benchmark problems. In addition, taking RPEA as an example, The VKOS proposed in this paper compared with several single mutation operators DE, PLM, NUM and representative solution generation strategies DEMR, VCEM, MM on these benchmark problems. The extensive experiments on well-known benchmark problems ranging from 3 to 15 objectives show that VKOS improves the performance of MaOEAs and has the superior performance over three single mutation operators and typical offspring generation strategies when solving most of these test MaOPs.

computer science, artificial intelligence
Running Time Analysis of the Non-dominated Sorting Genetic Algorithm II (NSGA-II) using Binary or Stochastic Tournament Selection

Chao Bian,Chao Qian

DOI: https://doi.org/10.48550/arXiv.2203.11550

2022-03-22

Neural and Evolutionary Computing

Abstract:Evolutionary algorithms (EAs) have been widely used to solve multi-objective optimization problems, and have become the most popular tool. However, the theoretical foundation of multi-objective EAs (MOEAs), especially the essential theoretical aspect, i.e., running time analysis, has been still largely underdeveloped. The few existing theoretical works mainly considered simple MOEAs, while the non-dominated sorting genetic algorithm II (NSGA-II), probably the most influential MOEA, has not been analyzed except for a very recent work considering a simplified variant without crossover. In this paper, we present a running time analysis of the standard NSGA-II for solving LOTZ, OneMinMax and COCZ, the three commonly used bi-objective optimization problems. Specifically, we prove that the expected running time (i.e., number of fitness evaluations) is $O(n^3)$ for LOTZ, and $O(n^2\log n)$ for OneMinMax and COCZ, which is surprisingly as same as that of the previously analyzed simple MOEAs, GSEMO and SEMO. Next, we introduce a new parent selection strategy, stochastic tournament selection (i.e., $k$ tournament selection where $k$ is uniformly sampled at random), to replace the binary tournament selection strategy of NSGA-II, decreasing the required expected running time to $O(n^2)$ for all the three problems. Experiments are also conducted, suggesting that the derived running time upper bounds are tight for LOTZ, and almost tight for OneMinMax and COCZ.
A Novel Genetic Algorithm using Helper Objectives for the 0-1 Knapsack Problem

Jun He,Feidun He,Hongbin Dong

DOI: https://doi.org/10.48550/arXiv.1404.0868

2014-04-03

Neural and Evolutionary Computing

Abstract:The 0-1 knapsack problem is a well-known combinatorial optimisation problem. Approximation algorithms have been designed for solving it and they return provably good solutions within polynomial time. On the other hand, genetic algorithms are well suited for solving the knapsack problem and they find reasonably good solutions quickly. A naturally arising question is whether genetic algorithms are able to find solutions as good as approximation algorithms do. This paper presents a novel multi-objective optimisation genetic algorithm for solving the 0-1 knapsack problem. Experiment results show that the new algorithm outperforms its rivals, the greedy algorithm, mixed strategy genetic algorithm, and greedy algorithm + mixed strategy genetic algorithm.
Research on Assembly Line Scheduling Based on Small Population Adaptive Genetic Algorithm

Lei Bao,Linxuan Zhang,Teng Sun

DOI: https://doi.org/10.1109/icsp51882.2021.9409012

2021-01-01

Abstract:Based on the assembly line scheduling problem, an improved adaptive genetic algorithm is proposed to solve the problem that small population genetic algorithm is easy to fall into local optimal solution. In the improved genetic algorithm, the mutation rate is increased in the early iteration to improve the diversity of offspring, and the mutation rate is reduced in the later iteration to retain effective genes. The improved roulette selection method is used to solve the problem that value of optimization objectives is large and single change of it is small. In order to improve the local search ability and computational speed of the algorithm, an adaptive genetic operator is used to dynamically adjust the crossover operator in the evolution process. The feasibility of the small population adaptive genetic algorithm is verified by experiments, and the performance is compared.
Efficient Noisy Optimisation with the Sliding Window Compact Genetic Algorithm

Simon M. Lucas,Jialin Liu,Diego Pérez-Liébana

DOI: https://doi.org/10.48550/arXiv.1708.02068

2017-08-07

Abstract:The compact genetic algorithm is an Estimation of Distribution Algorithm for binary optimisation problems. Unlike the standard Genetic Algorithm, no cross-over or mutation is involved. Instead, the compact Genetic Algorithm uses a virtual population represented as a probability distribution over the set of binary strings. At each optimisation iteration, exactly two individuals are generated by sampling from the distribution, and compared exactly once to determine a winner and a loser. The probability distribution is then adjusted to increase the likelihood of generating individuals similar to the winner. This paper introduces two straightforward variations of the compact Genetic Algorithm, each of which lead to a significant improvement in performance. The main idea is to make better use of each fitness evaluation, by ensuring that each evaluated individual is used in multiple win/loss comparisons. The first variation is to sample $n>2$ individuals at each iteration to make $n(n-1)/2$ comparisons. The second variation only samples one individual at each iteration but keeps a sliding history window of previous individuals to compare with. We evaluate methods on two noisy test problems and show that in each case they significantly outperform the compact Genetic Algorithm, while maintaining the simplicity of the algorithm.

Neural and Evolutionary Computing
Improved Nondominated Sorting Genetic Algorithm-Ii for Bi-Objective Flexible Job-Shop Scheduling Problem

Shu Luo,Linxuan Zhang,Yushun Fan

DOI: https://doi.org/10.1109/ssci47803.2020.9308210

2020-01-01

Abstract:In modern manufacturing industry, not only production efficiency, but also fairness in wages should be emphasized so as to motivate the staff. To this end, this paper addresses the multi-objective flexible job shop scheduling problem (MOFJSP) aiming at minimizing the makespan and maximum wage gap among workers simultaneously. An improved nondominated sorting genetic algorithm-II (INSGAII) is developed. The novelties are mainly presented as follows. First, a probability-based extended precedence preservative crossover operator (PEPPX) is designed for accelerating the convergence rate. Second, in order to solve the multi-modal problem, a “pruning-regenerating” mechanism (PRM) is developed to remove the redundant solutions in objective space and reinsert new solutions. Specifically, a novel metric called “encoding distance” is proposed to measure the diversity of solutions with exactly the same objective function values in chromosome encoding. Meanwhile, a critical path based variable neighborhood search (VNS) is designed to regenerate new solutions replacing the removed ones. Numerical experiments on a wide set of well-known benchmarks have confirmed the effectiveness and efficiency of the proposed INSGA-II.
Better Running Time of the Non-dominated Sorting Genetic Algorithm II (NSGA-II) by Using Stochastic Tournament Selection

Bian Chao,Qian Chao

DOI: https://doi.org/10.1007/978-3-031-14721-0_30

2022-01-01

Abstract:Evolutionary algorithms (EAs) have been widely used to solve multi-objective optimization problems, and have become the most popular tool. However, the theoretical foundation of multi-objective EAs (MOEAs), especially the essential theoretical aspect, i.e., running time analysis, is still largely underdeveloped. The few existing theoretical works mainly considered simple MOEAs, while the non-dominated sorting genetic algorithm II (NSGA-II), probably the most influential MOEA, has not been analyzed except for a very recent work considering a simplified variant without crossover. In this paper, we present a running time analysis of the standard NSGA-II for solving LOTZ, the commonly used bi-objective optimization problem. Specifically, we prove that the expected running time (i.e., number of fitness evaluations) is O(n(3)) for LOTZ, which is the same as that of the previously analyzed simple MOEAs, GSEMO and SEMO, as well as the NSGA-II without crossover. Next, we introduce a new parent selection strategy, stochastic tournament selection (i.e., k tournament selection where k is uniformly sampled at random), to replace the binary tournament selection strategy of NSGA-II, decreasing the upper bound on the required expected running time to O(n(2)). Experiments are also conducted, suggesting that the derived running time upper bounds are tight. We also empirically compare the performance of the NSGA-II using the two selection strategies on the widely used benchmark problem ZDT1, and the results show that stochastic tournament selection can help the NSGA-II converge faster.
A Novel Double-Strand DNA Genetic Algorithm for Multi-Objective Optimization

Wenke Zang,Weining Zhang,Zehua Wang,Dong Jiang,Xiyu Liu,Minghe Sun

DOI: https://doi.org/10.1109/access.2019.2894726

IF: 3.9

2019-01-01

IEEE Access

Abstract:Multi-objective optimization is important for many businesses, science, and engineering applications. Existing evolutionary algorithms for multi-objective optimization problems based on single chain encoding still have difficulties in obtaining high-quality results. This paper presents a new DNA genetic algorithm that uses a novel double-strand DNA encoding, a set of new genetic operators, and two new ranking criteria to obtain solutions that closely approximate the Pareto-optimal front. The extensive experiments were performed using a set of comprehensive benchmark bi-objective and tri-objective test problems. The experimental results show that this algorithm outperforms a set of the state-of-the-art evolutionary algorithms on several well-accepted performance metrics.

computer science, information systems,telecommunications,engineering, electrical & electronic

Optimization of linear consecutive-k-out-of-n system with a Birnbaum importance-based genetic algorithm

Ant Colony Optimization Algorithm for the 0-1 Knapsack Problem Based on Genetic Operators

A new genetic algorithm to handle the constrained optimization problem

Optimal Design of Binary Weighted K-Out-Of-N Systems

An Adaptive Real Coded Population-Based Incremental Learning Algorithm for Design Optimizations in Continuous Space

Optimization of scale-based product family using multiobjective genetic algorithm

Optimization of Scale Based Product Family Using Multiobjective Genetic Algorithm

Redundancy optimization for multi-state series-parallel systems using ordinal optimization-based-genetic algorithm

Continuous Optimization Algorithm Based on DNA

Ordinal Optimization of Parameters and Operators for Genetic Algorithm

A GENETIC ALGORITHM BASED ON OPTIMALITY CONDITIONS FOR NONLINEAR BILEVEL PROGRAMMING PROBLEMS

Solving Nonlinear Equations System Via an Efficient Genetic Algorithm with Symmetric and Harmonious Individuals

A modified hybrid rice optimization algorithm for solving 0-1 knapsack problem

An effective offspring generation strategy for many-objective optimization driven by knee points under variable classification

Running Time Analysis of the Non-dominated Sorting Genetic Algorithm II (NSGA-II) using Binary or Stochastic Tournament Selection

A Novel Genetic Algorithm using Helper Objectives for the 0-1 Knapsack Problem

Research on Assembly Line Scheduling Based on Small Population Adaptive Genetic Algorithm

Efficient Noisy Optimisation with the Sliding Window Compact Genetic Algorithm

Improved Nondominated Sorting Genetic Algorithm-Ii for Bi-Objective Flexible Job-Shop Scheduling Problem

Better Running Time of the Non-dominated Sorting Genetic Algorithm II (NSGA-II) by Using Stochastic Tournament Selection

A Novel Double-Strand DNA Genetic Algorithm for Multi-Objective Optimization