Abstract:The functional bearing is one kind of the seismic isolation merging the advantages of the sliding system and the bearing system and it is widely used in Taiwan. To evaluate the performance of the functional bearing in a bridge effectively, a simple but accurate model is appreciated. The present paper attempts to model a bridge with functional bearing taking into account that the rate-dependent pier with hardening behavior. The proposed model is viscoelastoplastic and contains four phases including a viscoelastic-sticking, a viscoelastic-sliding, a viscoplastic-sticking, and a viscoplastic-sliding phase. The theoretical analysis in the state-space space enables us to obtain an exact solution for each phase. In order to simulate the exact behavior of the bridge system, the phase switching criteria with four conditions are derived and four computing modules for computations in four phases as well as four pull-back modules to direct toward to an exact module are developed. The four-phase model and the exact arrangement of computation qualitatively and quantitatively provide the exact duration of each phase and the proper indices for the plastic degradation of the pier as well as the consumption of the friction interface. One comparison between the simulation and the experimental result of a bridge’s shaking table test demonstrates the accuracy of the proposed model and its algorithm for the response of the bridge with functional bearing. Three numerical demonstrations show the performance of the proposed incremental analysis and the capability of the proposed model to distinguish the behavior of the bridge system under the near-fault and the far-fault earthquake. The duration of each of the four phases is accurately determined and the plastic degradation of the pier as well as the consumption of the friction interface are exactly evaluated. The difference of the behavior of the bridge system under the near-fault and the far-fault earthquake is qualitatively and quantitatively recognized.

Bearing condition assessment of a simply elastic supported beam based on impact vibration testing

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Analysis and assessment of articulated skew hollow slab beam bridge

Numerical Investigation of the Vibration Performance of Elastically Supported Bridges Under a Moving Vehicle Load Based on Impact Factor

Analytical Solution for Dynamic Response of a Reinforced Concrete Beam with Viscoelastic Bearings Subjected to Moving Loads

Bearing Damage Detection of a Bridge under the Uncertain Conditions Based on the Bayesian Framework and Matrix Perturbation Method

Viscoelastoplastic and incremental analysis of bridge with functional bearing

Condition Assessment for High-Speed Railway Bridges Based on Vibration Response Caused by Vehicles

Research on Mapping Relationship Between Environmental Load and Vibration Response of Bridge Structure Based on Structural Health Monitoring Data

Incorporating Site-Specific Weigh-in-motion Data into Fatigue Life Assessment of Expansion Joints under Dynamic Vehicle Load

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Condition assessment of seismically isolated multi-span highway bridge bearings using recorded and simulated seismic responses

Real-Time Quantitative Evaluation on the Longitudinal Slip Performance of Spherical Steel Bearings of Long-Span Bridges

Theoretical and Experimental Study on Vibration Modal for Simply Supported Bridge

Condition Assessment of Railway Bridge Sliding Bearing Using Alternating Vehicle Longitudinal Excitation

Dynamic Response Impact of Vehicle Braking on Simply Supported Beam Bridges with Corrugated Steel Webs Based on Vehicle-Bridge Coupled Vibration Analysis

Influence of Temperature on the Natural Vibration Characteristics of Simply Supported Reinforced Concrete Beam

Nonlinear Dynamic Analysis of the Bridge Bearing and Genetic Algorithm–based Optimization for Seismic Mitigation

Time‐varying frequency‐based scaled flexibility identification of a posttensioned concrete bridge through vehicle–bridge interaction analysis

Dynamic Performance Investigation of a Long-Span Suspension Bridge Using a Bayesian Approach

Research on damage identification of simply supported bridge based on effect size method for vehicle-bridge coupled vibration