Abstract:Cellulosic fibers obtained from Barley straw were utilized to reinforce PHB. Four different processed fibers were employed as reinforcing material: sawdust (SW), defibered (DFBF), delignified (DBF), and bleached (BBF) fibers. The composite was processed from two different perspectives: a discontinuous (bach) and an intensification process (extrusion). Once processed and transformed into final shape specimens, the materials were characterized by mechanical testing (tensile mode), scanning electron microscopy, and theoretical simulations by finite elements analysis (FEA). In terms of mechanical properties, only the elastic moduli (Et) exhibited results ranging from 37% to 170%, depending on the reinforcement composition. Conversely, strengths at break, under both tensile and bending tests, tended to decrease, indicating poor affinity between the components. Due to the mechanical treatment applied on the fiber, DFBF emerged as the most promising filler, with mechanical properties closest to those of neat PHB. DFBF-based composites were subsequently produced through process intensification using a twin-screw extruder, and molded into flowerpots. Mechanical results showed almost identical properties between the discontinuous and intensification processes. The suitability of the material for agriculture flowerpots was demonstrated through finite analysis simulation (FEA), which revealed that the maximum von Mises stresses (5.38 × 105 N/m2) and deformations (0.048 mm) were well below the limits of the composite materials.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a composite material based on polyhydroxybutyrate (PHB) and barley straw fibers to produce products suitable for agricultural applications, such as flowerpots. Specifically, the research aims to: 1. **Improve material properties**: Enhance the mechanical properties of PHB - based composites by using barley straw fibers obtained through different treatment methods (sawdust, defibration, delignification, and bleached fibers). These treatment methods include mechanical separation and chemical treatment (such as alkali treatment and bleaching) to change the chemical composition and morphology of the fibers. 2. **Optimize the production process**: Explore two different production processes - the batch process and the extrusion process - to determine which method is more suitable for large - scale production of these composites and ensure the consistency of their mechanical properties. 3. **Evaluate economic and environmental friendliness**: Reduce production costs and increase the sustainability of crops by using agricultural waste (barley straw) as a fiber source. At the same time, verify the application potential of these composites in agriculture, especially as a substitute for traditional petroleum - based plastics. 4. **Verify the feasibility of practical applications**: Evaluate the performance of these composites in actual agricultural applications through finite element analysis (FEA) simulation and the manufacture of actual products (such as flowerpots) to ensure that their mechanical strength and deformation ability meet the requirements. ### Key issues and challenges - **Compatibility between fibers and polymer matrix**: Since PHB is a linear polyester, the interaction with fibers is limited, which affects the mechanical properties of the composite. In the study, special attention was paid to the influence of different treatment methods on the interaction between fibers and the PHB matrix. - **Fiber dispersibility**: A high content of fibers may lead to fiber agglomeration, thus affecting the uniformity and mechanical properties of the composite. The study observed the dispersion of fibers in the matrix through SEM images and found that some treatment methods (such as defibrated fiber DFBF) can significantly improve the dispersion effect. - **Optimization of mechanical properties**: Although the addition of fibers did not significantly increase the tensile strength, it showed a certain enhancement effect in the bending test. The study also found that the elastic modulus increased significantly with the increase of fiber content, indicating that the fibers can effectively increase the stiffness of the material. In conclusion, through systematically evaluating the influence of different treatment methods on barley straw fibers and optimizing the production process, this study provides important scientific basis and technical support for the development of high - performance, economically viable and environmentally friendly bio - based composites.

Polyhydroxy-3-Butyrate (PHB)-Based Composite Materials Reinforced with Cellulosic Fibers, Obtained from Barley Waste Straw, to Produce Pieces for Agriculture Applications: Production, Characterization and Scale-Up Analysis

Development and Characterisation of Composites Prepared from PHBV Compounded with Organic Waste Reinforcements, and Their Soil Biodegradation

Mechanical, thermal, and water absorption properties of HDPE/barley straw composites incorporating waste rubber

Cellulose/Polyhydroxybutyrate (PHB) Composites as a Sustainable Bio-Based Feedstock to 3D-Printing Applications

[Teichoic acids from the cell wall of Nocardiopsis prasina BKM Ac-1880T].

Influence of Giant Reed (Arundo Donax L.) Culms Processing Procedure on Physicochemical, Rheological, and Thermomechanical Properties of Polyethylene Composites

Reactive Melt Mixing of Poly(3-Hydroxybutyrate)/Rice Husk Flour Composites with Purified Biosustainably Produced Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)

Sustainable composites from agricultural waste: The use of steam explosion and surface modification to potentialize the use of wheat straw fibers for wood plastic composite industry

Nasal challenge with histamine decreases nonspecific bronchial reactivity in workers exposed to respiratory irritants.

Sustainable Polypropylene-Based Composites with Agro-Waste Fillers: Thermal, Morphological, Mechanical Properties and Dimensional Stability

Effect of the Presence of Lignin from Woodflour on the Compostability of PHA-Based Biocomposites: Disintegration, Biodegradation and Microbial Dynamics

Biodegradable composites made from maize flour filled with olive husk fibers

Valorization of Winery By-Products as Bio-Fillers for Biopolymer-Based Composites

Preparation of hemp‐based biocomposites and their potential industrial application

Plant oil fillers toughened poly(3-hydroxybutyrate) green biocomposites

Development and characterization of polymer composites with cotton straw fiber derived from agricultural wastes

Solution problem of deficit teaching time and information saturation in engineering education

Biopolymer composites based on ultrasound/plasma‐modified fiber waste and polybutylene adipate terephthalate (PBAT): Physicochemical and functional performance

Injection molding of biodegradable polyester blends filled with mineral and sustainable fillers: Performance evaluation

Sustainable packaging biocomposites from polylactic acid and wheat straw: Enhanced physical performance by solid state shear milling process

Morphological and crystalline evolution of nanostructured MnO2 and its application in lithium--air batteries.