Abstract:Two inerter-based passive vibration control configurations, i.e., a mass connected to a parallel combination of a spring and a damper in series with a spring and an inerter (Case I), and a traditional dynamic vibration absorber in series with an inerter (Case II), are proposed and are successfully applied to achieve the vibration suppression of beam-type structure. The frequency response functions of system displacement and acceleration are analytically derived through the classical vibration theory. The optimization problem of minimizing the maximum value of the frequency response function in the whole range or a certain range of frequency is expressed as a min-max problem and then the optimal parameters are derived numerically. Especially, for Case II the optimal system parameters can be analytically expressed by using the fixed-point theory. Numerical results show that the inerter-based passive vibration control configurations are more efficient than the traditional dynamic vibration absorber, especially for case with a small mass ratio. The inerter-based Case I is more efficient than the inerter-based Case II for a smaller mass ratio while contrary is true for a larger mass ratio. Also, the influences of the mass ratio and the inertance-to-mass ratio on the optimal system parameters are briefly discussed.

Linear matrix inequality-based vibration control of three-dimensional Euler–Bernoulli beam with external disturbance

Parameter-dependent Vibration-Attenuation Controller Design for Electro-Hydraulic Actuated Linear Structural Systems

Sampled-data-based Vibration Control for Structural Systems with Finite-Time State Constraint and Sensor Outage

Active vibration control of a nonlinear three-dimensional Euler–Bernoulli beam

H-Infinity Output Feedback Control with Alpha-Stability Constraint for Uncertain Linear Time-Delay Systems-An Lmi Approach

Robust boundary control approaches to the stabilization of the Euler–Bernoulli beam under external disturbances

Vibration control for the payload at the end of a nonlinear three-dimensional Euler–Bernoulli beam with input constraints

Three-dimensional vibration suppression for an Euler–Bernoulli beam with asymmetric output constraint

Vibration and Event-Triggered Control for Flexible Nonlinear Three-Dimensional Euler–Bernoulli Beam System

A Numerical Method of the Euler-Bernoulli Beam with Optimal Local Kelvin-Voigt Damping

Minimization of the Beam Response Using Inerter-Based Passive Vibration Control Configurations

Iterative learning control of an Euler-Bernoulli beam with time-varying boundary disturbance

Active vibration control strategy based on linear matrix inequality for rotor system

Adaptive Boundary Iterative Learning Control for an Euler-Bernoulli Beam System With Input Constraint

Modelling and neural adaptive vibration control for three-dimensional Timoshenko beam with output restrictions and external disturbances

Sliding mode vibration control of an Euler–Bernoulli beam with unknown external disturbances

Modeling and vibration suppression based on Nussbaum function for beam bridge with unknown control directions and unknown nonlinear time-varying actuator faults

Backstepping Technology-Based Adaptive Boundary ILC for an Input-Output-Constrained Flexible Beam

Vibration suppression of a beam using variable structure control with disturbance observer

Designing of the robust stabilizing controller for uncertain delay systems - LMI approach

Sliding mode vibration control of Euler–Bernoulli beam with unknown bounded disturbances