Effective nitrogen removal from onsite wastewater using a sequencing aerated biofilm reactor
Sarah Lotfikatouli,Qi Pan,Mian Wang,Frank M. Russo,Christopher J. Gobler,Xinwei Mao
DOI: https://doi.org/10.1016/j.jwpe.2024.105132
IF: 7
2024-03-15
Journal of Water Process Engineering
Abstract:A novel sequencing aerated biofilm reactor (SABR) was designed for effective nitrogen removal from onsite wastewater with a footprint 10 times smaller than conventional drainfield and a high hydraulic capacity. The study examined the effect of aeration pattern, wastewater strength, and carrier type on N-removal performance. Over 93 % COD removal and > 80 % TN-removal was achieved in the SABR integrated with a polishing unit (10 % woodchips, v/v) at the optimized aeration pattern (4-h pre-anoxic, 7 aeration cycles of 20 min aeration per hour at 1 L-air/min airflow rate, 1 h post-anoxic). Carriers' shape and surface area did not impact SABR's N-removal performance (31.8 % vs. 28.2 %). The optimal operation conditions obtained in bench-scale SABR tests were pilot tested with the 10 % woodchip polishing unit. Efficient TN-removal (72.4 %) was achieved with low effluent TN concentrations (6.5 ± 3.9 mg-N/L) by the pilot SABR. Ammonium (NH 4 + ) was the predominant N-species (5.5 ± 6.0 mg-N/L) in the final effluent while NO x − was constantly below the detection limit (< 0.05 mg-N/L). Quantitative PCR analysis of functional genes involved in N-removal ( amoA -AOA, amoA -AOB, nirS , nirK and nosZ ) were comparable for bench-scale and pilot-scale SABRs and revealed higher abundance of amoA -AOB (> 4 orders of magnitudes higher than amoA -AOA) and nirS ( nirK / nirS : 0.2–1.8 × 10 −2 ), suggesting amoA -AOB and nirS may serve as biomarkers to monitor the system performance. Collectively, the results suggest that SABR offers a versatile approach to treat wastewater at various strengths and is applicable in areas with space constraints, shallow groundwater, and sensitive water bodies.
engineering, chemical, environmental,water resources