A 2-Bit Electronically Planar Reconfigurable Array Antenna with 2-D Beam-Scanning Capacity Using Hybrid Phase Control Method

Min Wang,Nan Hu,Xuan Li,Yuxin Mo,Wenqing Xie,Zhengchuan Chen,Zhong Tian
DOI: https://doi.org/10.1109/lawp.2024.3354260
IF: 4.2
2024-01-01
IEEE Antennas and Wireless Propagation Letters
Abstract:A 2-bit electronically planar reconfigurable array antenna (PRAA) at Ku band is presented in this letter. The proposed PRAA element employs the hybrid phase control method to realize the reconfiguration of its radiation structure and feeding structure. The radiation structure is designed as a O-slot radiation patch integrated with two p-i-n diodes to obtain a 1-bit phase quantization. To obtain the 2-bit phase control ability, a digital phase shifter with two p-i-n diodes is integrated in the feeding structure to obtain additional 90° phase shifting. Then, a 4 × 4-element subarray is designed and simulated, which is fed by using an asymmetric 16-way stripline feeding network. To realize 2-D beam scanning, an 8 × 8-element PRAA prototype is fabricated and measured, which is composed of four subarrays stitched together. The measured gain of the pencil beam is 20.8 dBi at 12.2 GHz with aperture efficiency of 60.0%, while the 3-dB gain bandwidth is 13.9% (11.4 - 13.1 GHz). The measured results verify that the proposed PRAA has good 2-D beam scanning capability within ±45°. In addition, the height of the PPRA prototype is only 0.3λ0, which indicate this design has a highly integrated, planar, low-profile structure.
telecommunications,engineering, electrical & electronic
What problem does this paper attempt to address?