Abstract:Low-frequency noise has always been a thorny problem in the field of noise control. In recent years, the development of sound-absorbing metastructures has provided new ideas for low-frequency noise control. In this paper, we propose low-frequency sound-absorbing metastructures constructed by Helmholtz resonators with embedded slit. Analytical and numerical models were established to analyze the sound absorption performance and mechanism of the proposed sound-absorbing metastructure, and optimization design was conducted to achieve low-frequency wideband absorption performance. The analytical modeling method and the performance of the proposed sound-absorbing metastructure were also experimentally verified. The main conclusions are summarized as follows: 1) Based on the use of transfer matrix method and finite element method, analytical and numerical models for calculation of sound absorption coefficient were established. It was shown that analytical predictions are in good agreement with numerical calculations. It was demonstrated that a typical design of a single-cell metastructure with 30mm thickness can achieve a sound absorption coefficient of 0.88 at 404 Hz. Typical designs of two-cell and the four-cell parallel structures (with 50 mm thickness) can achieve two and four near-perfect low-frequency sound absorption peaks within the frequency band of 200-400 Hz, respectively. 2) The low-frequency sound absorption mechanisms of the proposed metastructure were explained from four aspects: simplified equivalent model parameters, normalized acoustic impedance, complex-plane zero/pole distribution, sound pressure cloud image and particle velocity field distribution. It was demonstrated that the main sound absorption mechanism is associated with the thermal viscous loss of sound waves caused the inner wall of embedded slit. 3) Optimization design for broadband low-frequency absorption performance was carried out by using differential evolution optimization algorithm. A parallel-multi-cell coupled metastructure with multiple perfect sound absorption peaks below 500Hz was optimized. Under the condition of thickness 90mm, the sound absorption coefficient curve of an optimized metastructure exhibited 8 near-perfect sound absorption peaks and an average sound absorption coefficient of 0.86 within the frequency range of 170-380 Hz. 4) Experimental samples were fabricated to carry out sound absorption tests. Experimental results were basically consistent with the analytical predictions. Mutual verification of analytical model, numerical calculation and experimental measurements was completed. To sum up, the sound-absorbing metastructures proposed in this paper have outstanding sound absorption performance at low frequencies with sub-wavelength thickness. We demonstrated they are suitable for low frequency broadband sound absorption below 500 Hz. Thanks to their thin thickness and relatively simple construction, they have broad application prospects in practical noise control engineering.

Study on low-mid-frequency broadband sound absorption properties of bending acoustic metamaterials with embedded porous materials

Study on the acoustic performance of bending metasurface with ultra-thin broadband quasi-perfect sound absorption

Broadening efficient sound absorption bandwidth of spatial bending acoustic metasurfaces with multi-parameter variation

Optimal Design of Broadband Acoustic Metasurface Absorbers

Acoustic metasurface embedded with thin-walled plate based on phase modulation for multi-angle broadband sound absorption

A mechanically adjustable acoustic metamaterial for low- frequency sound absorption with load-bearing and fire resistance

Theoretical and experimental investigation on the sound absorption performance of ultra-thin curled acoustic metasurface

Low-frequency broadband sound absorption of the metastructure with extended tube resonators and porous materials

Acoustic Metamaterials for Low-Frequency Noise Reduction Based on Parallel Connection of Multiple Spiral Chambers

Structural design and additive manufacturing of multifunctional metamaterials with low-frequency sound absorption and load-bearing performances

Multilayer coupled plate-type acoustic metamaterials for low-frequency broadband sound insulation

Low-frequency broadband acoustic metasurface absorbing panels

Acoustic Metamaterial Composed of Zigzag Channel and Micro-Perforated Plate for Enhanced Low-Frequency Sound Absorption

Underwater low-frequency sound absorption performance and broadband absorption design of membrane-type acoustic metamaterials

Broadband high-efficiency meta-structures design by acoustic critical absorption effect

Ultra-sparse Metamaterials Absorber for Broadband Low-Frequency Sound with Free Ventilation

Tunable low-frequency and broadband acoustic metamaterial absorber

Ultra-Broadband Absorption by Acoustic Metamaterials

Ultra-broadband sound absorption of a multiple-cavity metastructure with gradient thickness

Highly Efficient Low‐Frequency Broadband Sound Absorption with a Composite Hybrid Metasurface

Mechanism analysis and optimal design of sound-absorbing metastructure constructed by slit-embedded Helmholtz resonators