Abstract:Lithium–sulfur batteries are one of the most promising next generation electrochemical devices with low cost and high energy density. Up to now, various metal oxides with strong interaction with lithium polysulfides (LiPs) have been designed as sulfur hosts to inhibit the notorious shuttle effect. Nitrogen doping on metal oxides can not only improve their shortcomings of poor electrical conductivity, but also introduce additional oxygen vacancies to further enhance their interaction with LiPs. In this work, the nitrogen-doped titanium monoxide (N–TiO) nanospheres have been first synthesized through a one-step method based on the synergistic effect of carbothermal reduction and nitridation reaction. The X-ray diffraction results suggested the gradually changed diffraction peak position, corresponding to the nitridation process. Through the calculation of Gibbs free energies in the temperature range of 800–1500 K, it was confirmed that TiO2 can directly transform to TiO and then to TiN. Moreover, the structural characterization and X-ray photoelectron spectroscopy results suggested the synthesized N–TiO nanospheres contain mixed valences of Ti4+, Ti3+, and Ti2+, together with a significantly increased O vacancy concentration. By using N–TiO/S as the cathode, a high initial capacitance of 1438 mA h g–1 at 0.2 C can be achieved, which was higher than those of the undoped TiO/S and TiN/S electrodes. In addition, such a cathode also delivered an initial discharge capacity of 1105 mA h g–1 at 2 C, and retained 474 mA h g–1 after 800 cycles, corresponding to the capacity decay rate of 0.071% per cycle. The strong interaction between O vacancies in N–TiO and LiPs, which has been confirmed through visible adsorption experiment and cyclic voltammetry curves of the Li2S6 symmetric cells, is the main reason for its excellent electrochemical performance. This work can provide new ideas for the preparation and application of N-doped metal oxide materials in the field of lithium–sulfur batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00560?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00560</a>.Thermodynamic calculation methods; SEM images of the as synthesized TiO2 nanospheres; STEM image and SEI of the PDA-coated TiO2 nanospheres with corresponding EDX mapping scan results; SEM images of N-TiO without PDA coating; morphology and structural characterization results of TiN and Ar-TiO nanospheres; high-resolution SEI images of the three types of nanospheres; TGA curves and structural characterization results of N-TiO/S, Ar-TiO/S, and TiN/S cathodes; CV curves of the N-TiO/S electrode and Li2S6 symmetric cells with the three types of nanospheres as electrodes; galvanostatic charge–discharge curves of the three electrodes; calculated integrated area and relative content of fitted peaks in XPS spectra; and constants involved in the calculation of Gibbs free energies(<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00560/suppl_file/ae1c00560_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Titanium Glycolate Nanorods with Unsaturated Sites as Multifunctional Layers for Advanced Lithium–Sulfur Batteries

Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

3D Net-like GO-d-Ti3C2Tx MXene Aerogels with Catalysis/Adsorption Dual Effects for High-Performance Lithium-Sulfur Batteries

Synergistic Adsorption-Catalytic Sites TiN/Ta2O5 with Multidimensional Carbon Structure to Enable High-Performance Li-S Batteries

Advanced Li–S Batteries Enabled by a Biomimetic Polysulfide-Engulfing Net

Synthesis of Titanium Molybdenum Nitride-Decorated Electrospun Carbon Nanofiber Membranes as Interlayers to Suppress Polysulfide Shuttling in Lithium–Sulfur Batteries

Carbon@titanium Nitride Dual Shell Nanospheres As Multi-Functional Hosts for Lithium Sulfur Batteries

TiN nanocrystal anchored on N-doped graphene as effective sulfur hosts for high-performance lithium-sulfur batteries

TiO2-TiN Decorated Carbon Nanoplates Derived from NH2-MIL-125 with Efficient Polysulfide Catalytic Conversion for Long-Life Lithium-Sulfur Batteries

Synergistic Adsorption-Electrocatalysis of 2D/2D Heterostructure Toward High Performance Li-S Batteries

Design and Synthesis of Novel Pomegranate-Like TiN@MXene Microspheres As Efficient Sulfur Hosts for Advanced Lithium Sulfur Batteries

Ion Selective Covalent Organic Framework Enabling Enhanced Electrochemical Performance of Lithium–Sulfur Batteries

Cathode Nanostructuring and Separator Modification for High-Performance Lithium-Sulfur Batteries

Titanium nitride nanorod array/carbon cloth as flexible integrated host for highly stable lithium–sulfur batteries

Ultrafine NbN Nanoparticle Decorated Nitrogen-Doped Carbon Nanosheets with Efficient Polysulfide Catalytic Conversion for Superior Li-S Batteries

Ultrathin TiO2 surface layer coated TiN nanoparticles in freestanding film for high sulfur loading Li-S battery

Formation Mechanism of Nitrogen-Doped Titanium Monoxide Nanospheres and Their Application as Sulfur Hosts in Lithium Sulfur Batteries

Ultrafine TiO2 Decorated Carbon Nanofibers As Multifunctional Interlayer for High-Performance Lithium-Sulfur Battery.

Hollow multishelled structural TiN as multi-functional catalytic host for high-performance lithium-sulfur batteries

Rational Design of a MnO Nanoparticle-Embedded Carbon Nanofiber Interlayer for Advanced Lithium–Sulfur Batteries

Tg-C 3 N 4 -coated functional separator as polysulfide barrier of high-performance lithium-sulfur batteries