Abstract:The lithium-rich manganese (LRM)-based cathode materials are always subjected to poor rate capacity and terrible voltage fading. Herein, sodium citrate as a chelating agent is introduced to synthesize LRM cathode materials with high structure stability by the solvothermal method to solve the abovementioned issues. Sodium citrate can effectively control the morphology of cathode materials with a small size of primary particles, which can prevent the side reaction between the active materials and electrolyte and benefit Li+ diffusion. Meanwhile, the hydroxyl groups in sodium citrate can alter the crystal growth thermodynamics and thereby induce the formation of the active {010} planes under the solvothermal condition, which facilitates the formation of a good layered structure, so that the electrochemical reaction kinetics and rate performance are facilitated dramatically. Furthermore, benefitting from the doping of Na+, the structure of the cathode material does not collapse during repeated charge–discharge cycles, so that voltage stability is enhanced greatly. Consequently, at a current density of 5 C after cycling 200 times, the reversible capacity of the designed LRM cathode is 166 mA h g–1 with a high capacity retention of 90.1%, and the median voltage remains at 3.21 V with a voltage retention of 91.4%. The median voltage could remain as high as 3.37 V with a very high voltage retention of 94.1% even at 10 C after 200 cycles. This study proposes a novel strategy that utilizes the synergistic modification of morphology design and Na+ doping to increase the lithium storage performance of LRM cathode materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06595?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06595</a>.SEM images and electrochemical characterization of blank samples; XRD measurement, TEM images, and EDS elemental mappings of four samples; nitrogen adsorption/desorption measurement (BET, Beishide 3H-2000PM1/2); and ICP spectrometry (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06595/suppl_file/sc0c06595_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Morphology-controllable synthesis and excellent electrochemical performance of Ni-rich layered NCM622 as cathode materials for lithium-ion batteries via glycerin-assisted solvothermal method

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Simple Glycerol-Assisted and Morphology-Controllable Solvothermal Synthesis of Lithium-Ion Battery-Layered Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 Cathode Materials

Glycerol solvothermal synthesis of high-performance lithium-ion battery cathode materials with surface oxygen vacancies

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Facile Ball-Milling Synthesis of Pseudo-Single-Crystalline Nickel-Rich Layered Oxide Cathodes Towards Long-Lifespan Lithium-Ion Batteries

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Hierarchical Porous LiNi1/3Co1/3Mn1/3O2 Nano-/Micro Spherical Cathode Material: Minimized Cation Mixing and Improved Li+ Mobility for Enhanced Electrochemical Performance

Improving electrochemical performance of NCM811 cathodes for lithium-ion batteries via consistently arranging the hexagonal nanosheets with exposed {104} facets

One-pot synthesis and multifunctional surface modification of lithium-rich manganese-based cathode for enhanced structural stability and low-temperature performance

Hierarchical Porous LiNi 1/3 Co 1/3 Mn 1/3 O 2 Nano-/Micro Spherical Cathode Material: Minimized Cation Mixing and Improved Li + Mobility for Enhanced Electrochemical Performance

Micron-Sized Monodisperse Particle LiNi0.6Co0.2Mn0.2O2 Derived by Oxalate Solvothermal Process Combined with Calcination as Cathode Material for Lithium-Ion Batteries

Optimized Morphology and Tuning the Mn3+ Content of LiNi0.5Mn1.5O4 Cathode Material for Li-Ion Batteries

Morphology Control and Na + Doping toward High-Performance Li-Rich Layered Cathode Materials for Lithium-Ion Batteries

Improved solid-state synthesis and electrochemical properties of LiNi0.6Mn0.2Co0.2O2 cathode materials for lithium-ion batteries

Binary-compositional core-shell structure Ni-rich cathode material with radially oriented primary particles in shell for long cycling lifespan lithium-ion batteries

Achieving Long‐Life Ni‐Rich Cathodes with Improved Mechanical‐Chemical Properties Via Concentration Gradient Structure

Improvement of stability and capacity of Co-free, Li-rich layered oxide Li1.2Ni0.2Mn0.6O2 cathode material through defect control

Imitating Architectural Mortise‐Tenon Structure for Stable Ni‐Rich Layered Cathodes