Tenth International Computer Measurement Group Conference, San Francisco, CA, USA, December 3-7, 1984, Proceedings

Donald R. Deese,H. Artis,A. V. Mayrhauser,Bernard Domanski,Sidney Finehirsh,Jason G. Shane,J. Gaffney

Abstract:

What problem does this paper attempt to address?

Titanium Self-Intercalation Induced Formation of Orthogonal (1 × 1) Edge/Surface Reconstruction in 1T-Tise2: Atomic Scale Dynamics and Mechanistic Study

Daliang He,Yonghui Zheng,Degong Ding,Hao Ma,Aixinye Zhang,Yan Cheng,Wen Zhao,Chuanhong Jin

DOI: https://doi.org/10.1021/acs.nanolett.4c01040

IF: 10.8

2024-01-01

Nano Letters

Abstract:Edges and surfaces play indispensable roles in affecting the chemical-physical properties of materials, particularly in two-dimensional transition metal dichalcogenides (TMDCs) with reduced dimensionality. Herein, we report a novel edge/surface structure in multilayer 1T-TiSe2, i.e., the orthogonal (1 × 1) reconstruction, induced by the self-intercalation of Ti atoms into interlayer octahedral sites of the host TiSe2 at elevated temperature. Formation dynamics of the reconstructed edge/surface are captured at the atomic level by in situ scanning transmission electron microscopy (STEM) and further validated by density functional theory (DFT), which enables the proposal of the nucleation mechanism and two growth routes (zigzag and armchair). Via STEM-electron energy loss spectroscopy (STEM-EELS), a chemical shift of 0.6 eV in Ti L3,2 is observed in the reconstructed edge/surface, which is attributed to the change of the coordination number and lattice distortion. The present work provides insights to tailor the atomic/electronic structures and properties of 2D TMDC materials.
Direct In-Situ Insights into the Asymmetric Surface Reconstruction of Rutile TiO2 (110)

Wentao Yuan,Bingwei Chen,Zhong-Kang Han,Ruiyang You,Ying Jiang,Rui Qi,Guanxing Li,Hanglong Wu,Maria Veronica Ganduglia-Pirovano,Yong Wang

DOI: https://doi.org/10.1038/s41467-024-46011-6

IF: 16.6

2024-01-01

Nature Communications

Abstract:The reconstruction of rutile TiO 2 (110) holds significant importance as it profoundly influences the surface chemistry and catalytic properties of this widely used material in various applications, from photocatalysis to solar energy conversion. Here, we directly observe the asymmetric surface reconstruction of rutile TiO 2 (110)-(1×2) with atomic-resolution using in situ spherical aberration-corrected scanning transmission electron microscopy. Density functional theory calculations were employed to complement the experimental observations. Our findings highlight the pivotal role played by repulsive electrostatic interaction among the small polarons −formed by excess electrons following the removal of neutral oxygen atoms− and the subsequent surface relaxations induced by these polarons. The emergence and disappearance of these asymmetric structures can be controlled by adjusting the oxygen partial pressure. This research provides a deeper understanding, prediction, and manipulation of the surface reconstructions of rutile TiO 2 (110), holding implications for a diverse range of applications and technological advancements involving rutile-based materials.
Direct in-situ insights into the asymmetric surface reconstruction of rutile TiO 2 (110)

Wentao Yuan,Bingwei Chen,Zhong-Kang Han,Ruiyang You,Ying Jiang,Rui Qi,Guanxing Li,Hanglong Wu,Maria Veronica Ganduglia-Pirovano,Yong Wang

DOI: https://doi.org/10.1038/s41467-024-46011-6

IF: 16.6

2024-02-23

Nature Communications

Abstract:The reconstruction of rutile TiO 2 (110) holds significant importance as it profoundly influences the surface chemistry and catalytic properties of this widely used material in various applications, from photocatalysis to solar energy conversion. Here, we directly observe the asymmetric surface reconstruction of rutile TiO 2 (110)-(1×2) with atomic-resolution using in situ spherical aberration-corrected scanning transmission electron microscopy. Density functional theory calculations were employed to complement the experimental observations. Our findings highlight the pivotal role played by repulsive electrostatic interaction among the small polarons −formed by excess electrons following the removal of neutral oxygen atoms− and the subsequent surface relaxations induced by these polarons. The emergence and disappearance of these asymmetric structures can be controlled by adjusting the oxygen partial pressure. This research provides a deeper understanding, prediction, and manipulation of the surface reconstructions of rutile TiO 2 (110), holding implications for a diverse range of applications and technological advancements involving rutile-based materials.

multidisciplinary sciences
Determination of rutile transition metal oxide (110) surface terminations by scanning tunneling microscopy contrast reversal

Tianli Feng,Yang Wang,Andreas Herklotz,Matthew F. Chisholm,Thomas Z. Ward,Paul C. Snijders,Sokrates T. Pantelides

DOI: https://doi.org/10.1103/physrevb.103.035409

IF: 3.7

2021-01-11

Physical Review B

Abstract:The surfaces of rutile transition-metal oxides (TMO2) are widely investigated for catalysis, photoelectrochemical solar cells, memristors, and supercapacitors, but their structures have remained controversial. Here we employ density functional theory to predict that a universal behavior of metallic TMO2 surfaces, i.e., the stoichiometric TMO2 surfaces, exhibit a contrast reversal in simulated scanning tunneling microscopy (STM) images at different scanning biases. The predictions are verified by experimental STM imaging of RuO2(110) surfaces and this feature is shown to enable accurate determinations of the TMO2(110) surface structures under various conditions. This work provides different insights into the electronic properties of TMO2(110) surfaces and offers an effective method to directly map the surface structure and point defects using bias-dependent STM.

physics, condensed matter, applied,materials science, multidisciplinary
Scanning Tunneling Microscopy Visualization of Polaron Charge Trapping by Hydroxyls on TiO 2 (110)

Chi-Ming Yim,Michael Allan,Chi Lun Pang,Geoff Thornton

DOI: https://doi.org/10.1021/acs.jpcc.4c03751

2024-08-31

The Journal of Physical Chemistry C

Abstract:Using scanning tunneling microscopy (STM), we investigate the spatial distribution of the bridging hydroxyl (OH(b)) bound excess electrons on the rutile TiO(2)(110) surface and its temperature dependence. By performing simultaneously recorded empty and filled state imaging on single OH(b)s at different temperatures in STM, we determine that the spatial distribution of the OH(b) bound excess electrons retains a symmetric four-lobe structure around the OH(b) at both 78 and 7 K. This indicates that...

chemistry, physical,nanoscience & nanotechnology,materials science, multidisciplinary
Scanning Tunneling Microscopy and Density Functional Theory Combined Studies of Rutile TiO2(1 1 0) Surface Chemistry: Watch Surface Processes at the Atomic Scale

Wenhua Zhang,Zhenyu Li,Bing Wang,Jinlong Yang

DOI: https://doi.org/10.1002/qua.24281

2012-01-01

International Journal of Quantum Chemistry

Abstract:TiO2 has attracted great interest in chemical and physical sciences, partially due to its potential applications in catalysis. This article provides a brief review on recent progresses of joint scanning tunneling microscopy and density functional theory investigations on the electronic structure of reduced rutile TiO2(1 1 0) surface and the adsorption and reaction of oxygen, carbon monoxide, carbon dioxide, methanol, and ethanol on the surface. © 2012 Wiley Periodicals, Inc.
Formation and dynamics of small polarons on the rutile TiO$_2$(110) surface

Michele Reticcioli,Martin Setvin,Michael Schmid,Ulrike Diebold,Cesare Franchini

DOI: https://doi.org/10.1103/PhysRevB.98.045306

2018-05-05

Abstract:Charge trapping and formation of polarons is a pervasive phenomenon in transition metal oxide compounds, in particular at the surface, affecting fundamental physical properties and functionalities of the hosting materials. Here we investigate via first-principle techniques the formation and dynamics of small polarons on the reduced surface of titanium dioxide, an archetypal system for polarons, for a wide range of oxygen vacancy concentrations. We report how the essential features of polarons can be adequately accounted in terms of few quantities: the local structural and chemical environment, the attractive interaction between negatively charged polarons and positively charged oxygen vacancies, and the spin-dependent polaron-polaron Coulomb repulsion. We combined molecular dynamics simulations on realistic samples derived from experimental observations with simplified static models, aiming to disentangle the various variables at play. We find that depending on the specific trapping site, different types of polarons can be formed, with distinct orbital symmetries and different degree of localization and structural distortion. The energetically most stable polaron site is the subsurface Ti atom below the undercoordinated surface Ti atom, owing to a small energy cost to distort the lattice and a suitable electrostatic potential. Polaron-polaron repulsion and polaron-vacancy attraction determine the spatial distribution of polarons as well as the energy of the polaronic in-gap state. In the range of experimentally reachable oxygen vacancy concentrations the calculated data are in excellent agreement with observations, thus validating the overall interpretation.

Materials Science,Chemical Physics,Computational Physics
Theoretical Study on the Atomic Structure, Electronic States, and STM Image of C(2×2) Cu(001)/O Surface

XM Tao,MQ Tan,XJ Xu,JQ Cai,WB Chen,XX Zhao

DOI: https://doi.org/10.7498/aps.53.3858

IF: 0.906

2004-01-01

Acta Physica Sinica

Abstract:In this article we have studied the surface structure, relaxation, and oxygen absorbed c(2 x 2) Cu(001) surface by using ab initio projector augmented wave and Car-Parinello method. It is concluded that the bond length between oxygen and surface Cu atom is 0.194nm which yields a perpendicular distance of 0.069nm from O to Cu(S). The absorption of oxygen produces a hybridized band and yields the well localized surface states at 6.7 eV below E-F. The calculated work function for this absorbed surface is 5.29 eV. We also calculate the scanning tunneling microscope images in the Tersoff-Hamann approach and make comparison with available experimental observations.
A Density Functional Theory + U Study of Oxygen Vacancy Formation at the (110), (100), (101), and (001) Surfaces of Rutile TiO2

B. Morgan,G. Watson

DOI: https://doi.org/10.1021/JP811288N

2009-04-01

Abstract:Oxygen vacancy formation at the (110), (100), (001), and (101) surfaces of rutile TiO2 has been investigated using density functional theory with an on-site correction for strongly correlated systems (DFT + U). In agreement with experimental data, the reduced (110) surface shows an occupied defect state 0.7 eV below the bottom of the conduction band. The other reduced surfaces also show defect states in the band gap, with the defect state energies being strongly dependent on the choice of surface, and following the trend expected from crystal field arguments. For all the reduced surfaces, the excess charge associated with the defect states is primarily localized on two Ti sites neighboring the vacancy, formally reducing these to TiIII. For the (101) and (001) surfaces these Ti sites are geometrically inequivalent, and the corresponding gap states are separated in energy. Vacancy formation energies vary as ΔEvac(100) > ΔEvac(110) > ΔEvac(001) > ΔEvac(101). The variation in vacancy formation energy and gap ...

Chemistry,Materials Science
Analyzing the TiO2surface reactivity based on oxygen vacancies computed by DFT and DFTB methods

Yarkın Aybars Çetin,Benjamí Martorell,Francesc Serratosa,Neus Aguilera-Porta,Monica Calatayud

DOI: https://doi.org/10.1088/1361-648X/ac7025

2022-06-13

Abstract:Titanium dioxide is a key material in many fields, including technological, industrial and biomedical applications. Many of these applications are related to the surface reactivity of TiO2and involve its reducibility properties. Recently titania has been banned as a food additive due to its (nano)toxicity, and the release of reactive oxygen species plays a crucial role in many toxicological mechanisms. Determining chemical descriptors that account for the extension of reduction is necessary to understand such processes and necessary for predicting the reactivity of an unknown system. In the present work, we compute a set of chemical descriptors for selected surfaces of anatase and rutile TiO2. The aim is twofold: we want to provide chemically meaningful information on the surface reactivity, and benchmark the descriptors for twoab initioschemes. To do so, we compute the oxygen vacancy formation energy, and the corresponding electronic structure, in four slab models with two different computational schemes (DFT+Uand DFTB). In this way, we characterize the robustness of the dataset, with the purpose of scaling up to more realistic model systems such as nanoparticles or explicit solvent, which are too computationally demanding for state-of-the-art density functional theory approaches.
Observation of vacancy-related polaron states at the surface of anatase and rutile TiO2 by high-resolution photoelectron spectroscopy

Mark J. Jackmana,Peter Deák,Karen L. Syres,Johan Adell,Balasubramanian Thiagarajan,Anna Levy,Andrew G. Thomas

DOI: https://doi.org/10.48550/arXiv.1406.3385

2014-06-13

Abstract:Defects in the surface region of a reducible oxide, as TiO2, have a profound effect on applications, while their nature is very much influenced by the possibility of small polaron formation. Here, we probe rutile (110) and anatase (101) single crystals via high-resolution ultraviolet photoelectron spectroscopy and resolve multiple components of the well-known defect state in the band gap. In rutile, we find two at VBM+2.1 eV and VBM+1.4 eV, which we assign to subsurface polaron traps and vacancy-bound states, respectively, confirming the predicted partial suppression of polaron formation at high vacancy concentration. New defects are created in situ on the anatase surface by the synchrotron beam. We assign a component at VBM+2.3 eV, which can be removed by annealing, to polaron states associated with surface oxygen vacancies. We also identify a second component at VBM+1.6 eV, which can not be removed by annealing, and is too deep to be associated with oxygen vacancies.

Materials Science
Direct in Situ Determination and Modulation of Asymmetric Surface Reconstruction on Rutile TiO2

Yong Wang,Wentao Yuan,Bingwei Chen,Zhongkang Han,Ruiyang You,Ying Jiang,Rui Qi,Guanxing Li,Hanglong Wu,M. V. Ganduglia‐Pirovano

DOI: https://doi.org/10.21203/rs.3.rs-3229626/v1

2023-01-01

Abstract:Abstract Rutile TiO 2 (110)-(1×2) reconstructions have triggered long time debate due to the conflicts among different experimental observations. Here, by combining state-of-the-art in situ spherical aberration corrected scanning transmission electron microscopy and density functional theory calculations, we unravel the asymmetric surface reconstruction of rutile TiO 2 (110)-(1×2). We conclude that the repulsive electrostatic interaction among the small polarons, formed by the excess electrons after removal of neutral oxygen, and the consequent small polaron induced surface relaxations play critical roles in the asymmetric surface reconstruction. Importantly, the emergence and dissolution of these asymmetric structures can be modulated by tuning the oxygen partial pressure. This research offers an innovative approach to better understand, predict, and control surface reconstructions, holding significant implications for various applications and technological advancements.
Scanning Tunneling Microscopy And Density Functional Theory Combined Studies Of Rutile Tio2(110) Surface Chemistry: Watch Surface Processes At The Atomic Scale

wenhua zhang,zhenyu li,bing wang,jinlong yang

DOI: https://doi.org/10.1002/qua.24281

2013-01-01

International Journal of Quantum Chemistry

Abstract:TiO2 has attracted great interest in chemical and physical sciences, partially due to its potential applications in catalysis. This article provides a brief review on recent progresses of joint scanning tunneling microscopy and density functional theory investigations on the electronic structure of reduced rutile TiO2(1 1 0) surface and the adsorption and reaction of oxygen, carbon monoxide, carbon dioxide, methanol, and ethanol on the surface. (C) 2012 Wiley Periodicals, Inc.
Theoretical study of native point defects on anatase TiO2(101) surface

Xinguo Ma,Jianjun Jiang,Pei Liang

DOI: https://doi.org/10.7498/aps.57.3120

IF: 0.906

2008-01-01

Acta Physica Sinica

Abstract:First-principles plane-wave pseudopotential calculations were performed to study the energetics and the geometrical structures of intrinsic vacancies and interstitials on the anatase TiO2(101) crystal surface. Firstly, we analyzed the effects of point defects on the geometrical structures. For the O vacancy, all the nearest-neighbor Ti atoms move away from the vacancy toward the other 0 neighborhood. As Ti1 or Ti2 is missing here, O2 atom spontaneously and strongly binds with nearest-neighbor O on the lattice site to form an O2 molecule. The results also show that interstitial Tii2 affects little host lattice and the interstitial Oi would spontaneously bind to lattice oxygen. By investigating the calculated defect formation energies, we found that under the O-rich condition, the VTil and Oi formation are favorable, however, under the Ti-rich condition, although the point defects of Tii2 and VO1 easily appear, the formation energy of the Tii2 is lower than that of the FO1. Finally, to determine the relative stability of the point defects, the formation enthalpies of several point defects were considered.
The Electronic Structure of Oxygen Atom Vacancy and Hydroxyl Impurity Defects on Titanium Dioxide (110) Surface.

Taketoshi Minato,Yasuyuki Sainoo,Yousoo Kim,Hiroyuki S. Kato,Ken-ichi Aika,Maki Kawai,Jin Zhao,Hrvoje Petek,Tian Huang,Wei He,Bing Wang,Zhuo Wang,Yan Zhao,Jinlong Yang,J. G. Hou

DOI: https://doi.org/10.1063/1.3082408

2009-01-01

Abstract:Introducing a charge into a solid such as a metal oxide through chemical, electrical, or optical means can dramatically change its chemical or physical properties. To minimize its free energy, a lattice will distort in a material specific way to accommodate (screen) the Coulomb and exchange interactions presented by the excess charge. The carrier-lattice correlation in response to these interactions defines the spatial extent of the perturbing charge and can impart extraordinary physical and chemical properties such as superconductivity and catalytic activity. Here we investigate by experiment and theory the atomically resolved distribution of the excess charge created by a single oxygen atom vacancy and a hydroxyl (OH) impurity defects on rutile TiO(2)(110) surface. Contrary to the conventional model where the charge remains localized at the defect, scanning tunneling microscopy and density functional theory show it to be delocalized over multiple surrounding titanium atoms. The characteristic charge distribution controls the chemical, photocatalytic, and electronic properties of TiO(2) surfaces.
Molecular Oxygen Adsorption Behaviors on the Rutile TiO2(110)-1×1 Surface: an in Situ Study with Low-Temperature Scanning Tunneling Microscopy

Shijing Tan,Yongfei Ji,Yan Zhao,Aidi Zhao,Bing Wang,Jinlong Yang,J. G. Hou

DOI: https://doi.org/10.1021/ja110375n

IF: 15

2011-01-01

Journal of the American Chemical Society

Abstract:A knowledge of adsorption behaviors of oxygen on the model system of the reduced rutile TiO2(110)-1×1 surface is of great importance for an atomistic understanding of many chemical processes. We present a scanning tunneling microcopy (STM) study on the adsorption of molecular oxygen either at the bridge-bonded oxygen vacancies (BBOV) or at the hydroxyls (OH) on the TiO2(110)-1×1 surface. Using an in situ O2 dosing method, we are able to directly verify the exact adsorption sites and the dynamic behaviors of molecular O2. Our experiments provide direct evidence that an O2 molecule can intrinsically adsorb at both the BBOV and the OH sites. It has been identified that, at a low coverage of O2, the singly adsorbed molecular O2 at BBOV can be dissociated through an intermediate state as driven by the STM tip. However, singly adsorbed molecular O2 at OH can survive from such a tip-induced effect, which implies that the singly adsorbed O2 at OH is more stable than that at BBOV. It is interesting to observe that when the BBOVs are fully filled with excess O2 dosing, the adsorbed O2 molecules at BBOV tend to be nondissociative even under a higher bias voltage of 2.2 V. Such a nondissociative behavior is most likely attributed to the presence of two or more O2 molecules simultaneously adsorbed at a BBOV with a more stable configuration than singly adsorbed molecular O2 at a BBOV.
Atomic Structure of Polar Surface in SrTiO3

Adeel Y Abid,Ning Li,Ayaz Arif,Peng Gao

DOI: https://doi.org/10.48550/arXiv.1811.02780

2018-11-07

Abstract:Rearrangement of atoms due to broken translational symmetries at the surface of SrTiO$_3$ is scarcely debatable in the present day scenario. Actual concern demands to unveil the true structure and precise mechanism responsible for atomic reconstructions at a unit cell level. Here, we reveal the atomic structure of SrTiO$_3$ surface by using annular bright field imaging in spherical aberration corrected scanning transmission electron microscope. We measure structural parameters such as lattice constant, bond length, atomic displacement and subsequently we find a polarization for the top five unit cells is ~10-20 uCcm$^{-2}$. Both Sr-O and Ti-O planes reconstruct thus contribute to net dipole moment that is towards surface. Elongation of the out of plane lattice for skin layers is also witnessed. The electron energy loss spectroscopy experiment illustrates the presence of oxygen vacancies at the surface which seems to be largely responsible for the stability of surface polarization. Our study provides a sound foundation into mechanistic understanding for structure and properties of surfaces for complex oxides. These outcomes can be considered as a pragmatic boost particularly for examining other insulator-like materials as well as in bridging gap for hitherto fewer experimental investigation along with various theoretical studies.

Materials Science
Surface Properties and Electronic Structure of Low-Index Stoichiometric Anatase TiO2 Surfaces

Zongyan Zhao,Zhaosheng Li,Zhigang Zou

DOI: https://doi.org/10.1088/0953-8984/22/17/175008

2010-01-01

Journal of Physics Condensed Matter

Abstract:Using the ultrasoft pseudopotential plane wave method, we present a systematic theoretical study of six low-index stoichiometric anatase TiO2 surfaces, including (101), (100), (001), (103)f, (103)s and (110) surfaces. We paid particular attention to their surface properties and electronic structure, including the surface band structure, layer-resolved density of states, surface electron distribution and electrostatic potential. After surface relaxation, the electrons in the dangling bond of surface atoms redistributed inwards, and the surface states changed correspondingly. So the surface energy was reduced and then stabilized. Based on these calculated results, one can better understand the selective activities of different anatase TiO2 surfaces, and some relevant phenomena of TiO2 nanoparticles.
A systematic study of polarons due to oxygen vacancy formation at the rutile TiO2(110) surface by GGA + U and HSE06 methods

Taizo Shibuya,Kenji Yasuoka,Susanne Mirbt,Biplab Sanyal

DOI: https://doi.org/10.1088/0953-8984/24/43/435504

2012-10-31

Abstract:The polaronic nature of excess electrons accompanying an oxygen vacancy in a TiO(2)(110) surface has been studied by several theoretical approaches. According to previous studies, DFT + U and hybrid functional methods predict different sites of localization of the polarons. In this paper, we conducted a thorough comparison of the results obtained by GGA + U (generalized gradient approximation + Hubbard U) and HSE06 (Heyd-Scuseria-Ernzerhof hybrid functional) approximations. Considering initial symmetry breaking in the geometry optimization process, we show that regardless of the approximations used, electrons localize at two particular subsurface Ti sites in a state with mixed d(x(2)-y(2))/d(z(2)) character in the global coordinate frame with a spatial extent of the order of 7 Å. The lowest state of the polarons is a singlet, but the triplet is only about 0.1 meV higher in energy. Our results agree with previous experiments and calculations, wherever available. We stress that the hybrid functional has been first applied on this surface with a realistic coverage of oxygen vacancies corresponding to the experimental situation (~12.5%).
Photoemission Fingerprints for Structural Identification of Titanium Dioxide Surfaces

Patrizia Borghetti,Elisa Meriggio,Gwenaëlle Rousse,Gregory Cabailh,Rémi Lazzari,Jacques Jupille

DOI: https://doi.org/10.1021/acs.jpclett.6b01301

2018-05-27

Abstract:The wealth of properties of titanium dioxide relies on its various polymorphs and on their mixtures coupled with a sensitivity to crystallographic orientations. It is therefore pivotal to set out methods that allow surface structural identification. We demonstrate herein the ability of photoemission spectroscopy to provide Ti LMV (V = valence) Auger templates to quantitatively analyze TiO$_2$ polymorphs. The Ti LMV decay reflects Ti 4sp-O 2p hybridizations that are intrinsic properties of TiO$_2$ phases and orientations. Ti LMV templates collected on rutile (110), anatase (101), and (100) single crystals allow for the quantitative analysis of mixed nanosized powders, which bridges the gap between surfaces of reference and complex materials. As a test bed, the anatase/rutile P25 is studied both as received and during the anatase-to-rutile transformation upon annealing. The agreement with X-ray diffraction measurements proves the reliability of the Auger analysis and highlights its ability to detect surface orientations.

Materials Science

Tenth International Computer Measurement Group Conference, San Francisco, CA, USA, December 3-7, 1984, Proceedings

Titanium Self-Intercalation Induced Formation of Orthogonal (1 × 1) Edge/Surface Reconstruction in 1T-Tise2: Atomic Scale Dynamics and Mechanistic Study

Direct In-Situ Insights into the Asymmetric Surface Reconstruction of Rutile TiO2 (110)

Direct in-situ insights into the asymmetric surface reconstruction of rutile TiO 2 (110)

Determination of rutile transition metal oxide (110) surface terminations by scanning tunneling microscopy contrast reversal

Scanning Tunneling Microscopy Visualization of Polaron Charge Trapping by Hydroxyls on TiO 2 (110)

Scanning Tunneling Microscopy and Density Functional Theory Combined Studies of Rutile TiO2(1 1 0) Surface Chemistry: Watch Surface Processes at the Atomic Scale

Formation and dynamics of small polarons on the rutile TiO$_2$(110) surface

Theoretical Study on the Atomic Structure, Electronic States, and STM Image of C(2×2) Cu(001)/O Surface

A Density Functional Theory + U Study of Oxygen Vacancy Formation at the (110), (100), (101), and (001) Surfaces of Rutile TiO2

Analyzing the TiO2surface reactivity based on oxygen vacancies computed by DFT and DFTB methods

Observation of vacancy-related polaron states at the surface of anatase and rutile TiO2 by high-resolution photoelectron spectroscopy

Direct in Situ Determination and Modulation of Asymmetric Surface Reconstruction on Rutile TiO2

Scanning Tunneling Microscopy And Density Functional Theory Combined Studies Of Rutile Tio2(110) Surface Chemistry: Watch Surface Processes At The Atomic Scale

Theoretical study of native point defects on anatase TiO2(101) surface

The Electronic Structure of Oxygen Atom Vacancy and Hydroxyl Impurity Defects on Titanium Dioxide (110) Surface.

Molecular Oxygen Adsorption Behaviors on the Rutile TiO2(110)-1×1 Surface: an in Situ Study with Low-Temperature Scanning Tunneling Microscopy

Atomic Structure of Polar Surface in SrTiO3

Surface Properties and Electronic Structure of Low-Index Stoichiometric Anatase TiO2 Surfaces

A systematic study of polarons due to oxygen vacancy formation at the rutile TiO2(110) surface by GGA + U and HSE06 methods

Photoemission Fingerprints for Structural Identification of Titanium Dioxide Surfaces